Hi Misc@,
Has anyone encountered symux rrd graph spike on an AMD64 4.8-stable? I
have a Cacti installed on an amd64 4.8-stable and i386 4.7-stable. Graph
spike happens every time pf is reload (pfctl -f /etc/pf.conf) in an AMD64
machines, but doesn't happen on i386 4.7-stable. I see there is a
difference in symux version ( 2.79 on 4.7 and 2.82 on 4.8).
Anyone had a clue?
Thanks,
Insan Praja
DMESG (AMD64-stable):
OpenBSD 4.8-stable (GENERIC.MP) #1: Sun Dec 19 01:03:57 WIT 2010
r...@ns2.mygreenlinks.net:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 2110259200 (2012MB)
avail mem = 2040262656 (1945MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xf06d0 (48 entries)
bios0: vendor American Megatrends Inc. version "0604" date 07/22/2010
bios0: ASUSTeK Computer INC. P5G41T-M LX
acpi0 at bios0: rev 2
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP APIC MCFG OEMB HPET GSCI
acpi0: wakeup devices P0P2(S4) P0P3(S4) P0P1(S4) UAR1(S4) PS2K(S4)
PS2M(S4) USB0(S4) USB1(S4) USB2(S4) USB3(S4) EUSB(S4) MC97(S4) P0P4(S4)
P0P5(S4) P0P6(S4) P0P7(S4) P0P8(S4) P0P9(S4) SLPB(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 Duo CPU E7500 @ 2.93GHz, 2934.52 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,S
SE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG
cpu0: 3MB 64b/line 8-way L2 cache
cpu0: apic clock running at 266MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 Duo CPU E7500 @ 2.93GHz, 2934.17 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,S
SE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG
cpu1: 3MB 64b/line 8-way L2 cache
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (P0P2)
acpiprt2 at acpi0: bus -1 (P0P3)
acpiprt3 at acpi0: bus 2 (P0P1)
acpiprt4 at acpi0: bus 1 (P0P4)
acpiprt5 at acpi0: bus -1 (P0P5)
acpicpu0 at acpi0
acpicpu1 at acpi0
aibs0 at acpi0
acpibtn0 at acpi0: SLPB
acpibtn1 at acpi0: PWRB
cpu0: unknown Enhanced SpeedStep CPU, msr 0x06160b2506000b25
cpu0: using only highest and lowest power states
cpu0: Enhanced SpeedStep 2934 MHz: speeds: 2933, 1600 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel G41 Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel G41 Video" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xe0000000, size 0x10000000
inteldrm0 at vga1: apic 2 int 16 (irq 10)
drm0 at inteldrm0
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x01: apic
2 int 21 (irq 5)
azalia0: codecs: Realtek/0x0887
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: apic 2 int
16 (irq 10)
pci1 at ppb0 bus 1
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 2 int
23 (irq 3)
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 2 int
19 (irq 10)
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 2 int
18 (irq 6)
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 2 int
16 (irq 10)
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 2 int
23 (irq 3)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb1 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xe1
pci2 at ppb1 bus 2
rl0 at pci2 dev 0 function 0 "D-Link 530TX+" rev 0x10: apic 2 int 19 (irq
10), address 00:1e:58:3e:70:45
rlphy0 at rl0 phy 0: RTL internal PHY
rl1 at pci2 dev 1 function 0 "D-Link 530TX+" rev 0x10: apic 2 int 16 (irq
10), address 00:11:95:63:48:63
rlphy1 at rl1 phy 0: RTL internal PHY
pcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 disabled (no drives)
pciide1 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using apic 2 int 22 (irq 11) for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <WDC WD3200AAJS-08L7A0>
wd0: 16-sector PIO, LBA48, 305245MB, 625142448 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
wbsio0 at isa0 port 0x2e/2: W83627DHG-P rev 0x73
lm1 at wbsio0 port 0x290/8: W83627DHG
mtrr: Pentium Pro MTRR support
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
DMESG(i386 4.7-stable):
OpenBSD 4.7-stable (NS1.MP) #1: Sun Dec 19 00:57:58 WIT 2010
r...@ns1.mygreenlinks.net:/usr/src/sys/arch/i386/compile/NS1.MP
cpu0: Intel(R) Pentium(R) D CPU 2.66GHz ("GenuineIntel" 686-class) 2.68 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,S
SE3,MWAIT,DS-CPL,TM2,CNXT-ID,CX16,xTPR
real mem = 1064857600 (1015MB)
avail mem = 1023025152 (975MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 04/25/07, BIOS32 rev. 0 @ 0xfaa20,
SMBIOS rev. 2.4 @ 0xf0100 (33 entries)
bios0: vendor Award Software International, Inc. version "F2" date
04/25/2007
bios0: Gigabyte Technology Co., Ltd. 945GCM-S2
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP HPET MCFG APIC
acpi0: wakeup devices PEX0(S5) PEX1(S5) PEX2(S5) PEX3(S5) PEX4(S5)
PEX5(S5) HUB0(S5) UAR1(S1) UAR2(S1) USB0(S1) USB1(S1) USB2(
S1) USB3(S1) USBE(S1) AZAL(S5) PCI0(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 133MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Pentium(R) D CPU 2.66GHz ("GenuineIntel" 686-class) 2.68 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,S
SE3,MWAIT,DS-CPL,TM2,CNXT-ID,CX16,xTPR
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 2
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEX0)
acpiprt2 at acpi0: bus -1 (PEX1)
acpiprt3 at acpi0: bus -1 (PEX2)
acpiprt4 at acpi0: bus -1 (PEX3)
acpiprt5 at acpi0: bus -1 (PEX4)
acpiprt6 at acpi0: bus -1 (PEX5)
acpiprt7 at acpi0: bus 1 (HUB0)
acpicpu0 at acpi0
acpicpu1 at acpi0
acpibtn0 at acpi0: PWRB
bios0: ROM list: 0xc0000/0xa800! 0xcc000/0x4000 0xd0000/0x800
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945G Host" rev 0x02
vga1 at pci0 dev 2 function 0 "Intel 82945G Video" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xc0000000, size 0x10000000
inteldrm0 at vga1: apic 2 int 16 (irq 5)
drm0 at inteldrm0
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x01: apic
2 int 16 (irq 5)
azalia0: codecs: Realtek ALC888
audio0 at azalia0
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 2 int
23 (irq 9)
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 2 int
19 (irq 11)
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 2 int
18 (irq 6)
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 2 int
16 (irq 5)
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 2 int
23 (irq 9)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb0 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xe1
pci1 at ppb0 bus 1
fxp0 at pci1 dev 0 function 0 "Intel 8255x" rev 0x02, i82557: apic 2 int
20 (irq 12), address 00:04:ac:56:97:a2
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 0
ukphy0 at fxp0 phy 2: Generic IEEE 802.3u media interface, rev. 3: OUI
0x28a5c0, model 0x0008
fxp1 at pci1 dev 1 function 0 "Intel 8255x" rev 0x05, i82558: apic 2 int
19 (irq 11), address 00:08:c7:aa:ee:0c
inphy1 at fxp1 phy 1: i82555 10/100 PHY, rev. 0
re0 at pci1 dev 5 function 0 "Realtek 8169SC" rev 0x10: RTL8169/8110SCd
(0x1800), apic 2 int 21 (irq 10), address 00:1a:4d:6f:
b4:52
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01: PM
disabled
pciide0 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA,
channel 0 wired to compatibility, channel 1 wired to com
patibility
wd0 at pciide0 channel 1 drive 0: <ST380811AS>
wd0: 16-sector PIO, LBA48, 76318MB, 156299375 sectors
wd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 6
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: apic 2
int 19 (irq 11)
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pcppi0 at isa0 port 0x61
pci1 at ppb0 bus 1
fxp0 at pci1 dev 0 function 0 "Intel 8255x" rev 0x02, i82557: apic 2 int
20 (irq 12), address 00:04:ac:56:97:a2
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 0
ukphy0 at fxp0 phy 2: Generic IEEE 802.3u media interface, rev. 3: OUI
0x28a5c0, model 0x0008
fxp1 at pci1 dev 1 function 0 "Intel 8255x" rev 0x05, i82558: apic 2 int
19 (irq 11), address 00:08:c7:aa:ee:0c
inphy1 at fxp1 phy 1: i82555 10/100 PHY, rev. 0
re0 at pci1 dev 5 function 0 "Realtek 8169SC" rev 0x10: RTL8169/8110SCd
(0x1800), apic 2 int 21 (irq 10), address 00:1a:4d:6f:
b4:52
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01: PM
disabled
pciide0 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA,
channel 0 wired to compatibility, channel 1 wired to com
patibility
wd0 at pciide0 channel 1 drive 0: <ST380811AS>
wd0: 16-sector PIO, LBA48, 76318MB, 156299375 sectors
wd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 6
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: apic 2
int 19 (irq 11)
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
it0 at isa0 port 0x2e/2: IT8718F rev 2, EC port 0x290
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
vscsi0 at root
scsibus0 at vscsi0: 256 targets
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
PKG_INFO(AMD64-stable):
$ pkg_info -a
AcePerl-1.91p1 perl interface to the ACEDB database
amavisd-new-2.6.4p1 interface between mailer MTA and content checkers
arc-5.21op1 create & extract files from DOS .ARC files
bioperl-1.5.0p0 perl tools for bioinformatics
bzip2-1.0.5 block-sorting file compressor, unencumbered
cabextract-1.3 extracts files from Microsoft CAB archives
clamav-0.96.1p0 virus scanner
curl-7.20.0 get files from FTP, Gopher, HTTP or HTTPS servers
db-4.6.21p0 Berkeley DB package, revision 4
freeradius-2.1.9 RADIUS server implementation
freeradius-mysql-2.1.9 freeradius mysql rlm addon
freeze-2.5p0 FREEZE / MELT compression program - often used in QNX
gd-2.0.35p0 library for dynamic creation of images
gdbm-1.8.3p0 GNU dbm
gettext-0.18.1 GNU gettext
gmp-4.3.1 library for arbitrary precision arithmetic
gnupg-2.0.15 gnu privacy guard - a free PGP replacement
jdk-1.7.0.00b72p1 Java2(TM) SE Dev Kit v1.7.0.00 Early Access b72
jpeg-8b IJG's JPEG compression utilities
jre-1.7.0.00b72p1 Java2(TM) SE Runtime Environment v1.7.0.00 Early
Access b72
lha-1.14i.ac20050924.1 archive files using LZW compression (.lzh files)
libart-2.3.21 high-performance 2D graphics library
libassuan-2.0.0 IPC library used by GnuPG and gpgme
libgcrypt-1.4.6 crypto library based on code used in GnuPG
libghttp-1.0.9p2 GNOME http client library
libgpg-error-1.9 error codes for GnuPG related software
libiconv-1.13p1 character set conversion library
libidn-1.11 internationalized string handling
libksba-1.0.7p0 X.509 library
libltdl-1.5.26p0 GNU libtool system independent dlopen wrapper
libmcrypt-2.5.8p1 interface to access block/stream encryption algorithms
libusb-0.1.12 USB access library
libxml-2.7.6 XML parsing library
lzo2-2.03 portable speedy lossless data compression library
lzop-1.02rc1 fast file compressor similar to gzip
mod_perl-1.31p0 module that embeds a Perl interpreter into Apache
mysql-client-5.1.48 multithreaded SQL database (client)
mysql-server-5.1.48 multithreaded SQL database (server)
net-snmp-5.4.2.1p5 extendable SNMP implementation
p5-Archive-Zip-1.30 perl interface to ZIP files
p5-Authen-SASL-2.12 perl interface to the SASL auth framework
p5-BerkeleyDB-0.34p1 Berkeley DB module
p5-Cache-Cache-1.06 perl cache interface
p5-Class-AutoClass-1.01 auto getters/setters for perl
p5-Clone-0.31 recursively copy Perl datatypes
p5-Convert-BinHex-1.119p1 module to extract data from Macintosh BinHex
files
p5-Convert-TNEF-0.17p0 module to read TNEF files
p5-Convert-UUlib-1.09p0 interface to the uulib library
p5-Crypt-OpenSSL-Bignum-0.04p0 OpenSSL's multiprecision integer arithmetic
p5-Crypt-OpenSSL-RSA-0.25p0 RSA encoding and decoding using OpenSSL
p5-Crypt-OpenSSL-Random-0.04p0 routines for accessing the OpenSSL prng
p5-Crypt-SSLeay-0.57p0 library to provide LWP https support via OpenSSL
p5-DBD-mysql-4.014 MySQL drivers for the Perl DBI
p5-DBI-1.609 unified perl interface for database access
p5-Digest-HMAC-1.02 interface to HMAC Message-Digest Algorithms
p5-Digest-SHA1-2.12 module to calculate SHA1 digests
p5-Email-Date-Format-1.002 produce RFC 2822 date strings
p5-Error-0.17015 error/exception handling in an OO-ish way
p5-GD-2.44 module to interface with the GD graphics library
p5-GD-SVG-0.28p0 allow GD perl scripts to output SVG
p5-GSSAPI-0.26p0 perl interface to the GSSAPIv2 library
p5-Graph-0.91p0 graph data structures in perl
p5-HTML-Parser-3.65 modules to parse and extract information from HTML
p5-HTML-Tagset-3.20 data tables useful for parsing HTML
p5-HTML-Tree-3.23 perl parser that builds an HTML tree
p5-HTTP-GHTTP-1.07p1 perl interface to the GNOME GHTTP library
p5-Heap-0.80p0 heap data structure in perl
p5-IO-Socket-INET6-2.65 object interface for AF_INET and AF_INET6 domain
sockets
p5-IO-Socket-SSL-1.33 perl interface to SSL sockets
p5-IO-String-1.08p0 emulate IO::File interface for in-core strings
p5-IO-stringy-2.110p0 in-core objects like strings and arrays for I/O
p5-IPC-ShareLite-0.17 simple interface to access shared memory
p5-Libxml-0.08p0 perl module collection for working with XML
p5-MIME-Lite-3.027p0 low-calorie MIME generator
p5-MIME-Types-1.28 perl module to manage MIME types
p5-MIME-tools-5.427 modules for parsing (and creating) MIME entities
p5-Mail-DKIM-0.37 DKIM and DomainKeys message-signing implementation
p5-Mail-SpamAssassin-3.3.1p0 mailfilter to identify and mark spam
p5-Mail-Tools-2.04 modules for handling mail with perl
p5-Net-DNS-0.65 module to interface the DNS resolver
p5-Net-Daemon-0.43 extension for portable daemons
p5-Net-IP-1.25p0 perl module for IPv4/IPv6 address parsing
p5-Net-Jabber-2.0 perl interface to jabber
p5-Net-SSLeay-1.36 perl module for using OpenSSL
p5-Net-Server-0.97 extensible framework for Perl server engines
p5-Net-XMPP-1.02 XMPP perl library
p5-NetAddr-IP-4.030 manages IPv4 and IPv6 addresses and subnets
p5-PlRPC-0.2018p0 module for writing rpc servers and clients
p5-RRD-1.2.30 perl interface to librrd
p5-SNMP-5.4.2.1p1 SNMP modules for Perl
p5-SOAP-Lite-0.69p0 client and server-side SOAP implementation
p5-SVG-2.50 Scalable Vector Graphics (SVG) in perl
p5-Socket6-0.23 Perl defines relating to AF_INET6 sockets
p5-Time-TimeDate-1.20 library for parsing and formatting dates and times
p5-URI-1.54 library to parse Uniform Resource Identifiers
p5-Unix-Syslog-1.1p0 interface to the UNIX system logger
p5-WeakRef-0.01p0 API to the Perl weak references
p5-XML-NamespaceSupport-1.10 perl module to the SAX2 NamespaceSupport class
p5-XML-Parser-2.36p1 perl module for parsing XML documents
p5-XML-SAX-0.96p0 perl interface to the SAX2 XML parser
p5-XML-Stream-1.22 creates and XML Stream connection and parses return
data
p5-XML-Twig-3.32 perl module for parsing huge XML documents
p5-XML-Writer-0.606 perl extension for writing XML documents
p5-libwww-5.834p0 library for WWW access in Perl
p7zip-9.13 file archiver with high compression ratio
p7zip-rar-9.13 rar modules for p7zip
pcre-8.02p1 perl-compatible regular expression library
pear-1.7.2 base classes for common PHP tasks
pear-DB-1.7.6p2 database abstraction layer for PHP
pear-utils-1.7.2 utilities for managing pear extensions
pftop-0.7p6 curses-based real time state and rule display for pf
php5-core-5.2.13p0 server-side HTML-embedded scripting language
php5-gd-5.2.13p0-no_x11 image manipulation extensions for php5
php5-mbstring-5.2.13p0 multibyte characters extensions for php5
php5-mcrypt-5.2.13p0 mcrypt encryption/decryption extensions for php5
php5-mysql-5.2.13p0 mysql database access extensions for php5
php5-mysqli-5.2.13p0 mysql database access extensions for php5
php5-pdo_mysql-5.2.13p0 PDO mysql database access extensions for php5
phpMyAdmin-3.3.4 tool to handle the administration of MySQL over the web
pinentry-0.8.0p0 collection of simple PIN or passphrase entry dialogs
png-1.2.44 library for manipulating PNG images
postfix-2.7.1 fast, secure sendmail replacement
pth-2.0.7 GNU portable threads
python-2.6.5 interpreted object-oriented programming language
re2c-0.13.5 C-based regular expression scanner generator
ripole-0.2.0p0 extract attachments from OLE2 data files
rpm2cpio-1.3 rpm2cpio converter in Perl
rrdtool-1.2.30p0 system to store and display time-series data
rsync-3.0.7 mirroring/synchronization over low bandwidth links
sqlite3-3.6.23p0 embedded SQL implementation
symon-mux-2.82 symon data gatherer
t1lib-5.1.0p2 Type 1 rasterizer library for UNIX/X11
unarj-2.43p0 extract files from ARJ archives
unrar-3.97p0 extract, list, and test RAR archives
unzip-6.0 extract, list & test files in a ZIP archive
wget-1.12p0 retrieve files from the web via HTTP, HTTPS and FTP
xz-4.999.9beta LZMA compression and decompression tools
zoo-2.10.1p1 handle the old .ZOO archive format
PKG_INFO (i386 4.7-stable):
gettext-0.17p0 GNU gettext
jdk-1.7.0.00b72p0 Java2(TM) SE Dev Kit v1.7.0.00 Early Access b72
jpeg-7 IJG's JPEG compression utilities
libart-2.3.20p0 high-performance 2D graphics library
libdnet-1.12 portable low-level networking library
libiconv-1.13p0 character set conversion library
libidn-1.11 internationalized string handling
libltdl-1.5.26p0 GNU libtool system independent dlopen wrapper
libmcrypt-2.5.8 interface to access block/stream encryption algorithms
libnet-1.1.2.1p0 raw IP packet construction library
libxml-2.7.6 XML parsing library
lua-5.1.4p0 powerful, light-weight programming language
mhash-0.9.9.9 strong hash library
mysql-client-5.1.42 multithreaded SQL database (client)
mysql-server-5.1.42 multithreaded SQL database (server)
net-snmp-5.4.2.1p3 extendable SNMP implementation
nmap-5.00p1 scan ports and fingerprint stack of network hosts
p5-DBD-mysql-4.013 MySQL drivers for the Perl DBI
p5-DBI-1.609 unified perl interface for database access
p5-Net-Daemon-0.43 extension for portable daemons
p5-PlRPC-0.2018p0 module for writing rpc servers and clients
pcre-7.9 perl-compatible regular expression library
php5-core-5.2.12p1 server-side HTML-embedded scripting language
php5-gd-5.2.12 image manipulation extensions for php5
php5-mbstring-5.2.12p0 multibyte characters extensions for php5
php5-mcrypt-5.2.12p0 mcrypt encryption/decryption extensions for php5
php5-mysql-5.2.12p0 mysql database access extensions for php5
phpMyAdmin-3.2.4 tool to handle the administration of MySQL over the web
png-1.2.41 library for manipulating PNG images
rrdtool-1.2.30 system to store and display time-series data
rsync-3.0.7 mirroring/synchronization over low bandwidth links
symon-mux-2.79 symon data gatherer
t1lib-5.1.0p1 Type 1 rasterizer library for UNIX/X11
tcptraceroute-1.5beta7p1 traceroute implementation using TCP packets
unzip-5.52p0 extract, list & test files in a ZIP archive
wget-1.12p0 retrieve files from the web via HTTP, HTTPS and FTP
