If I run kismet this (handwritten transcript) happens:
# kismet
[some kismet initialization output]
Gathering packets...
[from now on text is white on blue]
uvm_fault(0xd0a26a60, 0xf000, 0, 1) -> e
kernel: page fault trap, code=0
Stopped at urtw_rxeof+0x215: movzwl 0(%eax),%eax
ddb{0}> trace
urtw_rxeof(d1e8a100,d204e038,0,a,d1e8a100) at urtw_rxeof+0x215
usb_transfer_complete(d1e8a100,d1e8a100,dcc10ef0,dcc10ef4,d1e52200) at
usb_transfer_complete+0x22b
ehci_softintr(d1ef5800,282,0,0,d02021ae) at ehci_softintr+0x37
softintr_dispatch(1) at softintr_dispatch+0x4f
Xsoftnet() at Xsoftnet+0x17
--- interrupt ---
cpu_idle_cycle(d0ae34a0) at cpu_idle_cycle+0xf
Bad frame pointer: 0xd0b9ae48
ddb{0}> ps
PID PPID PGRP UID S FLAGS WAIT COMMAND
29416 31101 3205 0 3 0x2000080 select kismet_server
31101 3205 3205 547 3 0x2004180 select kismet_server
3205 19753 3205 0 3 0x2004080 select kismet
[...]
(
Additional entries:
ksh, 4x getty, cron, apmd, polipo, tor, adsuck,
srdis, aucat, inetd, 9x smtpd, sshd, 2x pflogd, 2x syslogd,
aiodoned, update, cleaner, reaper, pagedaemon, crypto,
pfpurge, usbtask, usbatsk, sdmmc0, intelrel, acpi0,
idle1, syswq, idle0, kmthread, init, swapper
Note: usbatsk (?!)
)
ddb{0}> show panic
the kernel did not panic
ddb{0}> machine ddbcpu 1
Stopped at Debugger+0x4: popl %ebp
ddb{1}> trace
Debugger(d1d660000,1,dcc14f1c,1,d1d66034) at Debugger+0x4
i386_ipi_handler(0,d03e0058, d0a20010,10,dcc10010) at i386_ipi_handler+0x5f
Xintripi() at Xintripi+0x47
--- interrupt ---
cpu_idle_cycle(d1d66000) at cpu_idle_cycle+0xf
Bad frame pointer: 0xd0b9ae48
ddb{1}> boot reboot
(machine completely hangs, does not react to any keypresses anymore)
After 2h still no reaction. (pulling battery and DC connector, to reboot)
Any ideas? Any other information needed?
dmesg:
OpenBSD 4.8-current (GENERIC.MP) #660: Tue Jan 4 23:47:59 MST 2011
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz ("GenuineIntel" 686-class) 1.60 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,xTPR,PDCM,MOVBE
real mem = 1060163584 (1011MB)
avail mem = 1032712192 (984MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 05/09/08, SMBIOS rev. 2.4 @ 0xe8e70 (32
entries)
bios0: vendor Acer version "v0.3114" date 05/09/2008
bios0: Acer AOA150
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SSDT HPET APIC MCFG ASF! SLIC BOOT
acpi0: wakeup devices P32_(S4) UHC1(S3) UHC2(S3) UHC3(S3) UHC4(S3) ECHI(S3)
EXP1(S4) EXP2(S4) EXP3(S4) EXP4(S4) AZAL(S0) MODM(S0)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 133MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Atom(TM) CPU N270 @ 1.60GHz ("GenuineIntel" 686-class) 1.60 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,xTPR,PDCM,MOVBE
ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 4
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 4 (P32_)
acpiprt2 at acpi0: bus 1 (EXP1)
acpiprt3 at acpi0: bus 2 (EXP2)
acpiprt4 at acpi0: bus -1 (EXP3)
acpiprt5 at acpi0: bus 3 (EXP4)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2, C1, PSS
acpicpu1 at acpi0: C3, C2, C1, PSS
acpibtn0 at acpi0: PWRB
acpibtn1 at acpi0: LID0
acpibtn2 at acpi0: SLPB
acpibat0 at acpi0: BAT1 not present
acpiac0 at acpi0: AC unit online
acpivideo0 at acpi0: OVGA
acpivout0 at acpivideo0: CRT1
acpivout1 at acpivideo0: DTV1
acpivout2 at acpivideo0: DFP1
acpivout3 at acpivideo0: LCD_
acpivout4 at acpivideo0: DTV2
acpivout5 at acpivideo0: DFP2
bios0: ROM list: 0xc0000/0xec00! 0xcf000/0x1000
cpu0: Enhanced SpeedStep 1597 MHz: speeds: 1600, 1333, 1066, 800 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GME Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82945GME Video" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0x40000000, size 0x10000000
inteldrm0 at vga1: apic 4 int 16 (irq 11)
drm0 at inteldrm0
"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: apic 4 int
16 (irq 11)
azalia0: codecs: Realtek ALC268
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 4 int 16
(irq 255)
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 4 int 17
(irq 255)
pci2 at ppb1 bus 2
re0 at pci2 dev 0 function 0 "Realtek 8101E" rev 0x02: RTL8102EL (0x2480), apic
4 int 17 (irq 11), address 00:1e:68:ab:b0:0b
rlphy0 at re0 phy 7: RTL8201L 10/100 PHY, rev. 1
ppb2 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02: apic 4 int 19
(irq 255)
pci3 at ppb2 bus 3
"JMicron SD/MMC" rev 0x00 at pci3 dev 0 function 0 not configured
sdhc0 at pci3 dev 0 function 2 "JMicron SD Host Controller" rev 0x00: apic 4
int 19 (irq 11)
sdmmc0 at sdhc0
"JMicron Memory Stick" rev 0x00 at pci3 dev 0 function 3 not configured
"JMicron xD" rev 0x00 at pci3 dev 0 function 4 not configured
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 4 int 16
(irq 11)
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 4 int 17
(irq 11)
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 4 int 18
(irq 11)
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 4 int 19
(irq 11)
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 4 int 16
(irq 11)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci4 at ppb3 bus 4
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled
pciide0 at pci0 dev 31 function 2 "Intel 82801GBM SATA" rev 0x02: DMA, channel
0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <ST9120817AS>
wd0: 16-sector PIO, LBA48, 114473MB, 234441648 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 4 int 17
(irq 11)
iic0 at ichiic0
spdmem0 at iic0 addr 0x51: 512MB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
uvideo0 at uhub0 port 5 configuration 1 interface 0 "Sonix Technology Co., Ltd.
USB 2.0 Camera" rev 2.00/1.00 addr 2
video0 at uvideo0
urtw0 at uhub0 port 7 "Realtek RTL8187B" rev 2.00/2.00 addr 3
urtw0: RTL8187B rev E, address 00:24:d2:2f:6d:1d
vscsi0 at root
scsibus0 at vscsi0: 256 targets
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
WARNING: / was not properly unmounted
usbdevs:
Controller /dev/usb0:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 powered
port 2 powered
port 3 powered
port 4 powered
port 5 addr 2: high speed, power 98 mA, config 1, USB 2.0 Camera(0x62c0),
Sonix Technology Co., Ltd.(0x0c45), rev 1.00
port 6 powered
port 7 addr 3: high speed, power 100 mA, unconfigured, RTL8187B(0x8198),
Realtek(0x0bda), rev 2.00, iSerialNumber 00e04c000001
port 8 powered
Controller /dev/usb1:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 powered
port 2 powered
Controller /dev/usb2:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 powered
port 2 powered
Controller /dev/usb3:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 powered
port 2 powered
Controller /dev/usb4:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 powered
port 2 powered
$ diff -uNp /usr/local/share/examples/kismet/kismet.conf
/etc/kismet/kismet.conf:
--- /usr/local/share/examples/kismet/kismet.conf Sat Jan 1 21:12:36 2011
+++ /etc/kismet/kismet.conf Mon Jan 10 10:45:38 2011
@@ -28,7 +28,8 @@ networkmanagersleep=true
# a/b: source=radiotap_bsd_ab,ath0,radiotap_bsd_ab
# b: source=radiotap_bsd_b,ipw0,radiotap_bsd_b
# b (wi(4)) source=prism2_openbsd,wi0,prism2_openbsd
-source=none,none,addme
+#source=none,none,addme
+source=radiotap_bsd_ab,urtw0,radiotap_bsd_ab
# Comma-separated list of sources to enable. This is only needed if you
defined
# multiple sources and only want to enable some of them. By default, all
defined
