Just upgraded an amd64 system from the Nov.11 snap to Jan. 8th and now X
freezes the system. Tried again with a clean install of the Jan 9th
snap, thinking it might have been a fluke, but I'm still getting
freezes. It had been working fine with the Nov. 11 snap; no xorg.conf
needed.
startx results in a black screen, the box does not respond to pings, I
can't switch to virtual consoles, can't break into ddb, and I have to
hold down the power button to turn it off. Running "X -configure" gets
to the line reading:
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Jan 9 23:35:32 2011
and then sits there with a blinking cursor; again the machine is totally
unresponsive. Xorg.0.log is a zero-byte file.
Dmesg follows, sorry I can't provide an Xorg.0.log or get to ddb. If any
other info is helpful, I'd be happy to provide it.
The one slightly unusual thing about this system is I usually use a
DisplayPort to DVI adapter to drive the monitor. I did try switching to
the VGA port and the same freeze happens there.
OpenBSD 4.8-current (GENERIC.MP) #758: Sun Jan 9 15:46:09 MST 2011
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 2072645632 (1976MB)
avail mem = 2003460096 (1910MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xe9f80 (67 entries)
bios0: vendor Hewlett-Packard version "786G1 v01.23" date 12/11/2009
bios0: Hewlett-Packard HP Compaq dc7900 Ultra-Slim Desktop
acpi0 at bios0: rev 0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC ASF! MCFG TCPA SLIC HPET
acpi0: wakeup devices COM1(S4) COM2(S4) PCI0(S4) PEG1(S4) PEG2(S4)
IGBE(S4) PCX1(S4) PCX2(S4) PCX5(S4) PCX6(S4) HUB_(S4) USB1(S3) USB2(S3)
USB3(S3) USB4(S3) USB5(S3) USB6(S3) EUS1(S3) EUS2(S3) PBTN(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Pentium(R) Dual-Core CPU E5200 @ 2.50GHz, 2494.11 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,XSAVE,NXE,LONG
cpu0: 2MB 64b/line 8-way L2 cache
cpu0: apic clock running at 199MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Pentium(R) Dual-Core CPU E5200 @ 2.50GHz, 2493.73 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,XSAVE,NXE,LONG
cpu1: 2MB 64b/line 8-way L2 cache
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 1
acpimcfg0 at acpi0 addr 0xf4000000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG1)
acpiprt2 at acpi0: bus -1 (PEG2)
acpiprt3 at acpi0: bus 32 (PCX1)
acpiprt4 at acpi0: bus -1 (PCX2)
acpiprt5 at acpi0: bus 48 (PCX5)
acpiprt6 at acpi0: bus -1 (PCX6)
acpiprt7 at acpi0: bus 7 (HUB_)
acpicpu0 at acpi0: C2, C1, PSS
acpicpu1 at acpi0: C2, C1, PSS
acpibtn0 at acpi0: PBTN
cpu0: Enhanced SpeedStep 2493 MHz: speeds: 2500, 1800, 1200 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Q45 Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel Q45 Video" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xe0000000, size 0x10000000
inteldrm0 at vga1: apic 1 int 16 (irq 5)
drm0 at inteldrm0
"Intel Q45 Video" rev 0x03 at pci0 dev 2 function 1 not configured
"Intel Q45 HECI" rev 0x03 at pci0 dev 3 function 0 not configured
pciide0 at pci0 dev 3 function 2 "Intel Q45 PT IDER" rev 0x03: DMA
(unsupported), channel 0 wired to native-PCI, channel 1 wired to native-PCI
pciide0: using apic 1 int 18 (irq 10) for native-PCI interrupt
pciide0: channel 0 ignored (not responding; disabled or no drives?)
pciide0: channel 1 ignored (not responding; disabled or no drives?)
"Intel Q45 KT" rev 0x03 at pci0 dev 3 function 3 not configured
em0 at pci0 dev 25 function 0 "Intel ICH10 D BM LM" rev 0x02: apic 1 int
19 (irq 5), address 00:26:55:48:b4:80
uhci0 at pci0 dev 26 function 0 "Intel 82801JD USB" rev 0x02: apic 1 int
20 (irq 10)
uhci1 at pci0 dev 26 function 1 "Intel 82801JD USB" rev 0x02: apic 1 int
21 (irq 11)
uhci2 at pci0 dev 26 function 2 "Intel 82801JD USB" rev 0x02: apic 1 int
22 (irq 5)
ehci0 at pci0 dev 26 function 7 "Intel 82801JD USB" rev 0x02: apic 1 int
22 (irq 5)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801JD HD Audio" rev 0x02:
apic 1 int 21 (irq 11)
azalia0: codecs: Analog Devices AD1884A
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801JD PCIE" rev 0x02: apic 1 int
20 (irq 10)
pci1 at ppb0 bus 32
iwn0 at pci1 dev 0 function 0 "Intel WiFi Link 5100" rev 0x00: apic 1
int 16 (irq 5), MIMO 1T2R, MoW, address 00:1e:65:a4:df:96
ppb1 at pci0 dev 28 function 4 "Intel 82801JD PCIE" rev 0x02: apic 1 int
20 (irq 10)
pci2 at ppb1 bus 48
uhci3 at pci0 dev 29 function 0 "Intel 82801JD USB" rev 0x02: apic 1 int
20 (irq 10)
uhci4 at pci0 dev 29 function 1 "Intel 82801JD USB" rev 0x02: apic 1 int
21 (irq 11)
uhci5 at pci0 dev 29 function 2 "Intel 82801JD USB" rev 0x02: apic 1 int
22 (irq 5)
ehci1 at pci0 dev 29 function 7 "Intel 82801JD USB" rev 0x02: apic 1 int
20 (irq 10)
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xa2
pci3 at ppb2 bus 7
pcib0 at pci0 dev 31 function 0 "Intel 82801JDO LPC" rev 0x02
ahci0 at pci0 dev 31 function 2 "Intel 82801JD AHCI" rev 0x02: apic 1
int 18 (irq 10), AHCI 1.2
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, ST9640320AS, 0001> SCSI3 0/direct fixed
sd0: 610480MB, 512 bytes/sec, 1250263728 sec total
cd0 at scsibus0 targ 1 lun 0: <hp, DV-28S-V, A.0F> ATAPI 5/cdrom removable
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
mtrr: Pentium Pro MTRR support
uhidev0 at uhub7 port 1 configuration 1 interface 0 "vendor 0x062a
USB-compliant keyboard" rev 1.10/1.00 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub7 port 1 configuration 1 interface 1 "vendor 0x062a
USB-compliant keyboard" rev 1.10/1.00 addr 2
uhidev1: iclass 3/1, 6 report ids
uhid0 at uhidev1 reportid 1: input=2, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0
uhid2 at uhidev1 reportid 4: input=1, output=0, feature=0
ums0 at uhidev1 reportid 5: 0 button, Z dir
wsmouse0 at ums0 mux 0
uhid3 at uhidev1 reportid 6: input=3, output=0, feature=0
uhidev2 at uhub7 port 2 configuration 1 interface 0 "Logitech Apple
Optical USB Mouse" rev 2.00/3.40 addr 3
uhidev2: iclass 3/1
ums1 at uhidev2: 1 button
wsmouse1 at ums1 mux 0
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
--
Joe Gidi
j...@entropicblur.com
