On Sun, Jan 2, 2011 at 7:17 AM, Russell <russ...@dotplan.dyndns.org> wrote:
> On 01/01/2011 10:43 PM, Greg Steuck wrote:
>>
>> I was thinking of building a new wifi AP. The following is a stream of
>> thoughts on the subject. Any constructive suggestions are welcome.
>>
>> Requirements:
>> B  * Compatibility with Androids, Kindles, x86 Linux, OpenBSD wifi clients
>> B  * Strong in-doors signal
>> B  * Maximum control
>>
>> Nice to have:
>> B  * Combine the AP with the wired Ethernet OpenBSD router.
>> B  * Low power& B noise.
>>
>> Complications:
>> B  * A few wireless networks in nearby houses
>> B  * OpenBSD AP capable devices have a CAVEAT: Host AP mode doesn't
>> B  B  support power saving. B Clients attempting to use power saving mode
>> B  B  may experience significant packet loss (disabling power saving on
>> B  B  the client will fix this).
>>
>> Possible design:
>> B  * OpenBSD host with 2 or more wired Ethernets
>> B  * USB wifi device (free to switch host hardware)
>> B  * External Hi-Gain antenna
>>
>> Detailed implementation:
>> B * small i386 or armish machine for the host (Soekris?)
>> B * Hawking HWUG1 (rum(4)) ( http://goo.gl/ccd6Q )
>
> rum(4) did not like hostap mode the few times I tried.
> via the man page I think this is a problem with all usb radios
> so I tend to stick with pci/pcmcia cards ral(4) for my APs,
> however I have not had any other problems with rum.
> And fwiw I have had the worst luck picking out ath radios.
>
>> B * Hawking HAI7SIP Antenna ( http://goo.gl/Axg7j )
>>
>> Does anybody know if the CAVEAT above present a problem in real life for
>> the clients I listed?
>>
>> Thanks
>> Greg
>> --
>> nest.cx is Gmail hosted, use PGP for anything private. Key:
>> http://tinyurl.com/ho8qg
>> Fingerprint: 5E2B 2D0E 1E03 2046 BEC3 B 4D50 0B15 42BD 8DF5 A1B0
>
>

FWIW - I've had much better luck using obsd as my router/gateway
(providing dhcp,dns, ntp, plus a few other services for a few small
home networks) and then using a dedicated access point (linksys
wrt54gl/ubiquiti networks/etc) as a wired <-> wireless bridge then
actually using obsd as my access point.

Thanks,
--
Josh Smith
KD8HRX
email/jabber:B  juice...@gmail.com
phone:B  304.237.9369(c)

Reply via email to