> Greetings to all good I hope to help me
> I followed the manual gateway-firewall openbsd 4.8
> but still can not get or have no internet Conexxion client
>
> ADSL (router ext)
>
> 192.168.1.1
> |
> |
> xl0
> 192.168.1.101
> gatewayopenbsd4.8-
> xl1
> 192.168.0.1
> |
> |
> Client
> 192.168.0.10
> I have attached a number of client files and
> gateway (route, ping, pf, dhcp, rc, sysctl, messages, dmesg, etc) of
> configuration.
>
> Grateful for your help I hope
> is that your experience would be helpful to this newbie
/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
//////////////////////////// INFORMATION GATEWAY
////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
************ dmesg**********
OpenBSD 4.8 (RAMDISK_CD) #89: Mon Aug 16 09:24:20 MDT 2010
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: Intel Pentium III ("GenuineIntel" 686-class, 128KB L2 cache) 632 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PSE36,MMX,FXSR,SSE
real mem = 199585792 (190MB)
avail mem = 189444096 (180MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 03/07/01, BIOS32 rev. 0 @
0xfda74, SMBIOS rev. 2.3 @ 0xf0ea0 (55 entries)
bios0: vendor Intel Corp. version "A11" date 03/07/2001
bios0: Dell Computer Corporation L800C
apm0 at bios0: Power Management spec V1.2
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf2f30/192 (10 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xc000 0xcc000/0x800
cpu0 at mainbus0: (uniprocessor)
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82810 Host" rev 0x03
vga1 at pci0 dev 1 function 0 "Intel 82810 Video" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
ppb0 at pci0 dev 30 function 0 "Intel 82801AA Hub-to-PCI" rev 0x02
pci1 at ppb0 bus 1
xl0 at pci1 dev 8 function 0 "3Com 3c905C 100Base-TX" rev 0x30: irq
11, address 00:01:03:e8:38:4b
ukphy0 at xl0 phy 24: Generic IEEE 802.3u media interface, rev. 0: OUI
0x00601d, model 0x0035
xl1 at pci1 dev 9 function 0 "3Com 3c905 100Base-TX" rev 0x00: irq 10,
address 00:60:97:be:ca:2a
nsphy0 at xl1 phy 24: DP83840 10/100 PHY, rev. 1
ichpcib0 at pci0 dev 31 function 0 "Intel 82801AA LPC" rev 0x02:
24-bit timer at 3579545Hz
pciide0 at pci0 dev 31 function 1 "Intel 82801AA IDE" rev 0x02: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <QUANTUM FIREBALLlct20 10>
wd0: 8-sector PIO, LBA, 9787MB, 20044080 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HP, CD-Writer+ 7500, 1.0a> ATAPI
5/cdrom removable
cd0(pciide0:1:1): using PIO mode 4, DMA mode 2
uhci0 at pci0 dev 31 function 2 "Intel 82801AA USB" rev 0x02: irq 9
"Intel 82801AA SMBus" rev 0x02 at pci0 dev 31 function 3 not configured
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
usb0 at uhci0: USB revision 1.0
uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
biomask f3ed netmask ffed ttymask ffff
rd0: fixed, 3800 blocks
softraid0 at root
root on rd0a swap on rd0b dump on rd0b
syncing disks... done
rebooting...
OpenBSD 4.8 (GENERIC) #136: Mon Aug 16 09:06:23 MDT 2010
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III ("GenuineIntel" 686-class, 128KB L2 cache) 632 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PSE36,MMX,FXSR,SSE
real mem = 199585792 (190MB)
avail mem = 186396672 (177MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 03/07/01, BIOS32 rev. 0 @
0xfda74, SMBIOS rev. 2.3 @ 0xf0ea0 (55 entries)
bios0: vendor Intel Corp. version "A11" date 03/07/2001
bios0: Dell Computer Corporation L800C
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf2f30/192 (10 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xc000 0xcc000/0x800
cpu0 at mainbus0: (uniprocessor)
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82810 Host" rev 0x03
vga1 at pci0 dev 1 function 0 "Intel 82810 Video" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xf8000000, size 0x4000000
ppb0 at pci0 dev 30 function 0 "Intel 82801AA Hub-to-PCI" rev 0x02
pci1 at ppb0 bus 1
xl0 at pci1 dev 8 function 0 "3Com 3c905C 100Base-TX" rev 0x30: irq
11, address 00:01:03:e8:38:4b
ukphy0 at xl0 phy 24: Generic IEEE 802.3u media interface, rev. 0: OUI
0x00601d, model 0x0035
xl1 at pci1 dev 9 function 0 "3Com 3c905 100Base-TX" rev 0x00: irq 10,
address 00:60:97:be:ca:2a
nsphy0 at xl1 phy 24: DP83840 10/100 PHY, rev. 1
ichpcib0 at pci0 dev 31 function 0 "Intel 82801AA LPC" rev 0x02:
24-bit timer at 3579545Hz
pciide0 at pci0 dev 31 function 1 "Intel 82801AA IDE" rev 0x02: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <QUANTUM FIREBALLlct20 10>
wd0: 8-sector PIO, LBA, 9787MB, 20044080 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HP, CD-Writer+ 7500, 1.0a> ATAPI
5/cdrom removable
cd0(pciide0:1:1): using PIO mode 4, DMA mode 2
uhci0 at pci0 dev 31 function 2 "Intel 82801AA USB" rev 0x02: irq 9
ichiic0 at pci0 dev 31 function 3 "Intel 82801AA SMBus" rev 0x02: irq 10
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 128MB SDRAM non-parity PC133CL3
spdmem1 at iic0 addr 0x51: 64MB SDRAM non-parity PC100CL2
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
usb0 at uhci0: USB revision 1.0
uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
biomask f76d netmask ff6d ttymask ffff
mtrr: Pentium Pro MTRR support
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
syncing disks... done
rebooting...
OpenBSD 4.8 (GENERIC) #136: Mon Aug 16 09:06:23 MDT 2010
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III ("GenuineIntel" 686-class, 128KB L2 cache) 632 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PSE36,MMX,FXSR,SSE
real mem = 199585792 (190MB)
avail mem = 186396672 (177MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 03/07/01, BIOS32 rev. 0 @
0xfda74, SMBIOS rev. 2.3 @ 0xf0ea0 (55 entries)
bios0: vendor Intel Corp. version "A11" date 03/07/2001
bios0: Dell Computer Corporation L800C
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf2f30/192 (10 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xc000 0xcc000/0x800
cpu0 at mainbus0: (uniprocessor)
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82810 Host" rev 0x03
vga1 at pci0 dev 1 function 0 "Intel 82810 Video" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xf8000000, size 0x4000000
ppb0 at pci0 dev 30 function 0 "Intel 82801AA Hub-to-PCI" rev 0x02
pci1 at ppb0 bus 1
xl0 at pci1 dev 8 function 0 "3Com 3c905C 100Base-TX" rev 0x30: irq
11, address 00:01:03:e8:38:4b
ukphy0 at xl0 phy 24: Generic IEEE 802.3u media interface, rev. 0: OUI
0x00601d, model 0x0035
xl1 at pci1 dev 9 function 0 "3Com 3c905 100Base-TX" rev 0x00: irq 10,
address 00:60:97:be:ca:2a
nsphy0 at xl1 phy 24: DP83840 10/100 PHY, rev. 1
ichpcib0 at pci0 dev 31 function 0 "Intel 82801AA LPC" rev 0x02:
24-bit timer at 3579545Hz
pciide0 at pci0 dev 31 function 1 "Intel 82801AA IDE" rev 0x02: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <QUANTUM FIREBALLlct20 10>
wd0: 8-sector PIO, LBA, 9787MB, 20044080 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HP, CD-Writer+ 7500, 1.0a> ATAPI
5/cdrom removable
cd0(pciide0:1:1): using PIO mode 4, DMA mode 2
uhci0 at pci0 dev 31 function 2 "Intel 82801AA USB" rev 0x02: irq 9
ichiic0 at pci0 dev 31 function 3 "Intel 82801AA SMBus" rev 0x02: irq 10
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 128MB SDRAM non-parity PC133CL3
spdmem1 at iic0 addr 0x51: 64MB SDRAM non-parity PC100CL2
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
usb0 at uhci0: USB revision 1.0
uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
biomask f76d netmask ff6d ttymask ffff
mtrr: Pentium Pro MTRR support
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
syncing disks... done
rebooting...
OpenBSD 4.8 (GENERIC) #136: Mon Aug 16 09:06:23 MDT 2010
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III ("GenuineIntel" 686-class, 128KB L2 cache) 632 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PSE36,MMX,FXSR,SSE
real mem = 199585792 (190MB)
avail mem = 186396672 (177MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 03/07/01, BIOS32 rev. 0 @
0xfda74, SMBIOS rev. 2.3 @ 0xf0ea0 (55 entries)
bios0: vendor Intel Corp. version "A11" date 03/07/2001
bios0: Dell Computer Corporation L800C
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf2f30/192 (10 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xc000 0xcc000/0x800
cpu0 at mainbus0: (uniprocessor)
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82810 Host" rev 0x03
vga1 at pci0 dev 1 function 0 "Intel 82810 Video" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xf8000000, size 0x4000000
ppb0 at pci0 dev 30 function 0 "Intel 82801AA Hub-to-PCI" rev 0x02
pci1 at ppb0 bus 1
xl0 at pci1 dev 8 function 0 "3Com 3c905C 100Base-TX" rev 0x30: irq
11, address 00:01:03:e8:38:4b
ukphy0 at xl0 phy 24: Generic IEEE 802.3u media interface, rev. 0: OUI
0x00601d, model 0x0035
xl1 at pci1 dev 9 function 0 "3Com 3c905 100Base-TX" rev 0x00: irq 10,
address 00:60:97:be:ca:2a
nsphy0 at xl1 phy 24: DP83840 10/100 PHY, rev. 1
ichpcib0 at pci0 dev 31 function 0 "Intel 82801AA LPC" rev 0x02:
24-bit timer at 3579545Hz
pciide0 at pci0 dev 31 function 1 "Intel 82801AA IDE" rev 0x02: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <QUANTUM FIREBALLlct20 10>
wd0: 8-sector PIO, LBA, 9787MB, 20044080 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HP, CD-Writer+ 7500, 1.0a> ATAPI
5/cdrom removable
cd0(pciide0:1:1): using PIO mode 4, DMA mode 2
uhci0 at pci0 dev 31 function 2 "Intel 82801AA USB" rev 0x02: irq 9
ichiic0 at pci0 dev 31 function 3 "Intel 82801AA SMBus" rev 0x02: irq 10
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 128MB SDRAM non-parity PC133CL3
spdmem1 at iic0 addr 0x51: 64MB SDRAM non-parity PC100CL2
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
usb0 at uhci0: USB revision 1.0
uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
biomask f76d netmask ff6d ttymask ffff
mtrr: Pentium Pro MTRR support
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
***********netstat_rnf_inet****************
Routing tables
Internet:
Destination Gateway Flags Refs Use Mtu Prio Iface
default 192.168.1.1 UGS 0 359 - 8 xl0
127/8 127.0.0.1 UGRS 0 0 33200 8 lo0
127.0.0.1 127.0.0.1 UH 2 352 33200 4 lo0
192.168.0/24 link#2 C 2 0 - 4 xl1
192.168.0.1 00:60:97:be:ca:2a HLc 0 6 - 4 lo0
192.168.0.10 link#2 HLc 1 19 - 4 xl1
192.168.1/24 link#1 UC 1 0 - 4 xl0
192.168.1.1 00:1d:0f:fc:95:de UHLc 2 10 - 4 xl0
192.168.1.101 127.0.0.1 UGHS 2 24 33200 8 lo0
224/4 127.0.0.1 URS 0 0 33200 8 lo0
********* ping_cliente ********************
--- 192.168.0.10 ping statistics ---
3 packets transmitted, 0 packets received, 100.0% packet loss
************** rc *********************
!/bin/sh -
#
# $OpenBSD: rc.conf,v 1.139 2010/07/29 13:55:48 jmc Exp $
# set these to "NO" to turn them off. otherwise, they're used as flags
ldpd_flags=NO # for normal use: ""
ripd_flags=NO # for normal use: ""
mrouted_flags=NO # for normal use: "", if activated
# be sure to enable multicast_router below.
dvmrpd_flags=NO # for normal use: ""
ospfd_flags=NO # for normal use: ""
ospf6d_flags=NO # for normal use: ""
bgpd_flags=NO # for normal use: ""
rarpd_flags=NO # for normal use: "-a"
bootparamd_flags=NO # for normal use: ""
rbootd_flags=NO # for normal use: ""
sshd_flags="" # for normal use: ""
named_flags="" # for normal use: ""
rdate_flags=NO # for normal use: [RFC868-host] or [-n RFC2030-host]
timed_flags=NO # for normal use: ""
ldattach_flags=NO # for normal use: "[options] linedisc cua-device"
ntpd_flags=NO # for normal use: ""
isakmpd_flags=NO # for normal use: ""
iked_flags=NO # for normal use: ""
sasyncd_flags=NO # for normal use: ""
mopd_flags=NO # for normal use: "-a"
apmd_flags=NO # for normal use: ""
dhcpd_flags=NO # for normal use: ""
dhcrelay_flags=NO # for normal use: "-i interface [server]"
rtadvd_flags=NO # for normal use: list of interfaces
# be sure to set net.inet6.ip6.forwarding=1
route6d_flags=NO # for normal use: ""
# be sure to set net.inet6.ip6.forwarding=1
rtsold_flags=NO # for normal use: interface
# be sure to set net.inet6.ip6.forwarding=0
# be sure to set net.inet6.ip6.accept_rtadv=1
lpd_flags=NO # for normal use: "" (or "-l" for debugging)
sensorsd_flags=NO # for normal use: ""
hotplugd_flags=NO # for normal use: ""
watchdogd_flags=NO # for normal use: ""
ftpproxy_flags=NO # for normal use: ""
hostapd_flags=NO # for normal use: ""
ifstated_flags=NO # for normal use: ""
relayd_flags=NO # for normal use: ""
snmpd_flags=NO # for normal use: ""
smtpd_flags=NO # for normal use: ""
aucat_flags=NO # for normal use: ""
ldapd_flags=NO # for normal use: ""
# use -u to disable chroot, see httpd(8)
httpd_flags=NO # for normal use: "" (or "-DSSL" after reading ssl(8))
# For normal use: "-L sm-mta -bd -q30m", and note there is a cron job
sendmail_flags="-L sm-mta -C/etc/mail/localhost.cf -bd -q30m"
spamd_flags=NO # for normal use: "" and see spamd(8)
spamd_black=NO # set to YES to run spamd without greylisting
spamlogd_flags="" # use eg. "-i interface" and see spamlogd(8)
# Set to NO if ftpd is running out of inetd
ftpd_flags=NO # for non-inetd use: "-D"
# Set to NO if identd is running out of inetd
identd_flags=NO # for non-inetd use: "-b -elo"
# On some architectures, you must also disable console getty in /etc/ttys
xdm_flags=NO # for normal use: ""
# For enabling console mouse support (i386 alpha amd64)
wsmoused_flags=NO # for ps/2 or usb mice: "", serial: "-p /dev/cua00"
# set the following to "YES" to turn them on
rwhod=NO
nfs_server=NO # see sysctl.conf for nfs client configuration
lockd=NO
amd=NO
pf=YES # Packet filter / NAT
ipsec=NO # IPsec
bt=NO # Bluetooth
portmap=NO # Note: inetd(8) rpc services need portmap too
inetd=YES # almost always needed
check_quotas=YES # NO may be desirable in some YP environments
accounting=NO # process accounting (using /var/account/acct)
krb5_master_kdc=NO # KerberosV master KDC. Run 'info heimdal' for help.
krb5_slave_kdc=NO # KerberosV slave KDC.
afs=NO # mount and run afs
# Multicast routing configuration
# Please look at netstart(8) for a detailed description if you change these
multicast_host=NO # Route all multicast packets to a single interface
multicast_router=NO # A multicast routing daemon will be run, e.g. mrouted
# miscellaneous other flags
# only used if the appropriate server is marked YES above
savecore_flags= # "-z" to compress
ypserv_flags= # E.g. -1 for YP v1, -d for DNS etc
yppasswdd_flags=NO # "-d /etc/yp" if passwd files are in /etc/yp
nfsd_flags="-tun 4" # Crank the 4 for a busy NFS fileserver
amd_master=/etc/amd/master # AMD 'master' map
syslogd_flags= # add more flags, e.g. "-u -a /chroot/dev/log"
pf_rules=/etc/pf.conf # Packet filter rules file
ipsec_rules=/etc/ipsec.conf # IPsec rules file
bt_rules=/etc/bt.conf # Bluetooth rules file
pflogd_flags= # add more flags, e.g. "-s 256"
afsd_flags= # Flags passed to afsd
shlib_dirs= # extra directories for ldconfig, separated
# by space
local_rcconf="/etc/rc.conf.local"
[ -f ${local_rcconf} ] && . ${local_rcconf} # Do not edit this line
**************** sysctl **************************
# $OpenBSD: sysctl.conf,v 1.47 2009/06/09 11:52:54 sthen Exp $
#
# This file contains a list of sysctl options the user wants set at
# boot time. See sysctl(3) and sysctl(8) for more information on
# the many available variables.
#
net.inet.ip.forwarding=1 # 1=Permit forwarding (routing) of IPv4 packets
#net.inet.ip.mforwarding=1 # 1=Permit forwarding (routing) of IPv4
multicast packets
#net.inet.ip.multipath=1 # 1=Enable IP multipath routing
#net.inet.icmp.rediraccept=1 # 1=Accept ICMP redirects
#net.inet6.icmp6.rediraccept=0 # 0=Don't accept IPv6 ICMP redirects
#net.inet6.ip6.forwarding=1 # 1=Permit forwarding (routing) of IPv6 packets
#net.inet6.ip6.mforwarding=1 # 1=Permit forwarding (routing) of IPv6
multicast packets
#net.inet6.ip6.multipath=1 # 1=Enable IPv6 multipath routing
#net.inet6.ip6.accept_rtadv=1 # 1=Permit IPv6 autoconf (forwarding must be 0)
#net.inet.tcp.rfc1323=0 # 0=Disable TCP RFC1323 extensions (for if tcp
is slow)
#net.inet.tcp.rfc3390=0 # 0=Disable RFC3390 for TCP window increasing
#net.inet.esp.enable=0 # 0=Disable the ESP IPsec protocol
#net.inet.ah.enable=0 # 0=Disable the AH IPsec protocol
#net.inet.esp.udpencap=0 # 0=Disable ESP-in-UDP encapsulation
#net.inet.ipcomp.enable=1 # 1=Enable the IPCOMP protocol
#net.inet.etherip.allow=1 # 1=Enable the Ethernet-over-IP protocol
#net.inet.tcp.ecn=1 # 1=Enable the TCP ECN extension
#net.inet.carp.preempt=1 # 1=Enable carp(4) preemption
#net.inet.carp.log=1 # 1=Enable logging of carp(4) packets
#ddb.panic=0 # 0=Do not drop into ddb on a kernel panic
#ddb.console=1 # 1=Permit entry of ddb from the console
#fs.posix.setuid=0 # 0=Traditional BSD chown() semantics
#vm.swapencrypt.enable=0 # 0=Do not encrypt pages that go to swap
#vfs.nfs.iothreads=4 # Number of nfsio kernel threads
#net.inet.ip.mtudisc=0 # 0=Disable tcp mtu discovery
#kern.usercrypto=0 # 0=Disable userland use of /dev/crypto
#kern.splassert=2 # 2=Enable with verbose error messages
#kern.nosuidcoredump=2 # 2=Put suid coredumps in /var/crash
#kern.watchdog.period=32 # >0=Enable hardware watchdog(4) timer if
available
#kern.watchdog.auto=0 # 0=Disable automatic watchdog(4) retriggering
machdep.allowaperture=2 # See xf86(4)
#machdep.apmhalt=1 # 1=powerdown hack, try if halt -p doesn't work
#machdep.kbdreset=1 # permit console CTRL-ALT-DEL to do a nice halt
#machdep.lidsuspend=1 # laptop lid closes cause a suspend
#machdep.userldt=1 # allow userland programs to play with ldt,
# required by some ports
#kern.emul.aout=1 # enable running dynamic OpenBSD a.out bins
#kern.emul.freebsd=1 # enable running FreeBSD binaries
#kern.emul.linux=1 # enable running Linux binaries
#kern.emul.svr4=1 # enable running SVR4 binaries
********* ping_wwwopenbsd *******************
PING www.openbsd.org (142.244.12.42): 56 data bytes
64 bytes from 142.244.12.42: icmp_seq=0 ttl=233 time=174.725 ms
64 bytes from 142.244.12.42: icmp_seq=1 ttl=233 time=173.004 ms
64 bytes from 142.244.12.42: icmp_seq=2 ttl=233 time=173.861 ms
--- www.openbsd.org ping statistics ---
3 packets transmitted, 3 packets received, 0.0% packet loss
round-trip min/avg/max/std-dev = 173.004/173.863/174.725/0.780 ms
****************pfctl_sa********************
FILTER RULES:
match out on egress inet from ! (egress:network) to any nat-to
(egress:0) round-robin
block return in log all
pass out quick all flags S/SA keep state
pass in inet proto icmp all icmp-type echoreq keep state
pass in on xl1 all flags S/SA keep state
block return in on ! lo0 proto tcp from any to any port 6000:6010
No queue in use
INFO:
Status: Enabled for 0 days 00:50:59 Debug: err
Interface Stats for xl0 IPv4 IPv6
Bytes In 301818 0
Bytes Out 18342 64
Packets In
Passed 290 0
Blocked 6 0
Packets Out
Passed 253 1
Blocked 0 0
State Table Total Rate
current entries 0
searches 570 0.2/s
inserts 52 0.0/s
removals 52 0.0/s
Counters
match 58 0.0/s
bad-offset 0 0.0/s
fragment 0 0.0/s
short 0 0.0/s
normalize 0 0.0/s
memory 0 0.0/s
bad-timestamp 0 0.0/s
congestion 0 0.0/s
ip-option 0 0.0/s
proto-cksum 0 0.0/s
state-mismatch 0 0.0/s
state-insert 0 0.0/s
state-limit 0 0.0/s
src-limit 0 0.0/s
synproxy 0 0.0/s
TIMEOUTS:
tcp.first 120s
tcp.opening 30s
tcp.established 86400s
tcp.closing 900s
tcp.finwait 45s
tcp.closed 90s
tcp.tsdiff 30s
udp.first 60s
udp.single 30s
udp.multiple 60s
icmp.first 20s
icmp.error 10s
other.first 60s
other.single 30s
other.multiple 60s
frag 30s
interval 10s
adaptive.start 6000 states
adaptive.end 12000 states
src.track 0s
LIMITS:
states hard limit 10000
src-nodes hard limit 10000
frags hard limit 5000
tables hard limit 1000
table-entries hard limit 200000
TABLES:
OS FINGERPRINTS:
696 fingerprints loaded
************* dhcpd **************
# $OpenBSD: dhcpd.conf,v 1.2 2008/10/03 11:41:21 sthen Exp $
#
# DHCP server options.
# See dhcpd.conf(5) and dhcpd(8) for more information.
#
# Network: 192.168.1.0/255.255.255.0
# Domain name: my.domain
# Name servers: 192.168.1.3 and 192.168.1.5
# Default router: 192.168.1.1
# Addresses: 192.168.1.32 - 192.168.1.127
#
option domain-name "my.domain";
option domain-name-servers 192.168.1.3, 192.168.1.5;
subnet 192.168.1.0 netmask 255.255.255.0 {
option routers 192.168.1.1;
range 192.168.1.32 192.168.1.127;
host static-client {
hardware ethernet 22:33:44:55:66:77;
fixed-address 192.168.1.200;
}
host pxe-client {
hardware ethernet 02:03:04:05:06:07;
filename "pxeboot";
next-server 192.168.1.1;
}
}
*********************** var_log_messages **********************
Dec 1 00:31:29 gateway /bsd: softraid0 at root
Dec 1 00:31:29 gateway /bsd: root on wd0a swap on wd0b dump on wd0b
Dec 1 00:31:29 gateway named[21877]: starting BIND 9.4.2-P2
Dec 1 00:31:30 gateway named[21877]: command channel listening on 127.0.0.1#953
Dec 1 00:31:30 gateway named[21877]: command channel listening on ::1#953
Dec 1 00:31:30 gateway named[21877]: running
Dec 1 00:31:30 gateway savecore: no core dump
Dec 1 00:31:33 gateway dhcpd[21708]: Can't listen on xl1 - dhcpd.conf
has no subnet declaration for 192.168.0.1.
Dec 1 00:31:33 gateway dhcpd[21708]: No interfaces to listen on.
Dec 1 00:31:33 gateway dhcpd[21708]: exiting.
************ route_show *************************************
Routing tables
Internet:
Destination Gateway Flags Refs Use Mtu Prio Iface
default 192.168.1.1 UGS 0 261 - 8 xl0
loopback localhost UGRS 0 0 33200 8 lo0
localhost localhost UH 2 24 33200 4 lo0
192.168.0/24 link#2 C 2 0 - 4 xl1
gateway 00:60:97:be:ca:2a HLc 0 6 - 4 lo0
192.168.0.10 link#2 HLc 1 19 - 4 xl1
192.168.1/24 link#1 UC 1 0 - 4 xl0
192.168.1.1 00:1d:0f:fc:95:de UHLc 1 9 - 4 xl0
192.168.1.101 localhost UGHS 2 24 33200 8 lo0
BASE-ADDRESS.MCAST localhost URS 0 0 33200 8 lo0
Internet6:
Destination Gateway Flags Refs Use Mtu Prio Iface
::/104 localhost UGRS 0 0 - 8 lo0
::/96 localhost UGRS 0 0 - 8 lo0
localhost localhost UH 14 0 33200 4 lo0
::127.0.0.0/104 localhost UGRS 0 0 - 8 lo0
::224.0.0.0/100 localhost UGRS 0 0 - 8 lo0
::255.0.0.0/104 localhost UGRS 0 0 - 8 lo0
::ffff:0.0.0.0/96 localhost UGRS 0 0 - 8 lo0
2002::/24 localhost UGRS 0 0 - 8 lo0
2002:7f00::/24 localhost UGRS 0 0 - 8 lo0
2002:e000::/20 localhost UGRS 0 0 - 8 lo0
2002:ff00::/24 localhost UGRS 0 0 - 8 lo0
fe80::/10 localhost UGRS 0 0 - 8 lo0
fe80::%xl0/64 link#1 UC 0 0 - 4 xl0
fe80::201:3ff:fee8 00:01:03:e8:38:4b UHL 0 0 - 4 lo0
fe80::%xl1/64 link#2 C 0 0 - 4 xl1
fe80::260:97ff:feb 00:60:97:be:ca:2a HL 0 0 - 4 lo0
fe80::%lo0/64 fe80::1%lo0 U 0 0 - 4 lo0
fe80::1%lo0 link#4 UHL 0 0 - 4 lo0
fec0::/10 localhost UGRS 0 0 - 8 lo0
ff01::/16 localhost UGRS 0 0 - 8 lo0
ff01::%xl0/32 link#1 UC 0 0 - 4 xl0
ff01::%xl1/32 link#2 C 0 0 - 4 xl1
ff01::%lo0/32 localhost UC 0 0 - 4 lo0
ff02::/16 localhost UGRS 0 0 - 8 lo0
ff02::%xl0/32 link#1 UC 0 0 - 4 xl0
ff02::%xl1/32 link#2 C 0 0 - 4 xl1
ff02::%lo0/32 localhost UC 0 0 - 4 lo0
*************** ping_router_exterior *****************
PING 192.168.1.1 (192.168.1.1): 56 data bytes
64 bytes from 192.168.1.1: icmp_seq=0 ttl=64 time=1.006 ms
64 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=0.773 ms
64 bytes from 192.168.1.1: icmp_seq=2 ttl=64 time=0.729 ms
--- 192.168.1.1 ping statistics ---
3 packets transmitted, 3 packets received, 0.0% packet loss
round-trip min/avg/max/std-dev = 0.729/0.836/1.006/0.121 ms
**************** pf *********************
# $OpenBSD: pf.conf,v 1.49 2009/09/17 06:39:03 jmc Exp $
#
# See pf.conf(5) for syntax and examples.
# Remember to set net.inet.ip.forwarding=1 and/or net.inet6.ip6.forwarding=1
# in /etc/sysctl.conf if packets are to be forwarded between interfaces.
int="xl1"
set block-policy return
set loginterface xl0
match out on egress inet from !(egress:network) to any nat-to (egress:0)
block in log
set skip on lo
# filter rules and anchor for ftp-proxy(8)
#anchor "ftp-proxy/*"
#pass in quick proto tcp to port ftp rdr-to 127.0.0.1 port 8021
# anchor for relayd(8)
#anchor "relayd/*"
pass out quick # to establish keep-state
pass in inet proto icmp all icmp-type echoreq
pass in on $int
# rules for spamd(8)
#table <spamd-white> persist
#table <nospamd> persist file "/etc/mail/nospamd"
#pass in on egress proto tcp from any to any port smtp \
# rdr-to 127.0.0.1 port spamd
#pass in on egress proto tcp from <nospamd> to any port smtp
#pass in log on egress proto tcp from <spamd-white> to any port smtp
#pass out log on egress proto tcp to any port smtp
#block in quick from urpf-failed to any # use with care
# By default, do not permit remote connections to X11
block in on ! lo0 proto tcp to port 6000:6010
***************************** ifconfig *****************************
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 33200
priority: 0
groups: lo
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4
xl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:01:03:e8:38:4b
priority: 0
groups: egress
media: Ethernet autoselect (100baseTX full-duplex)
status: active
inet6 fe80::201:3ff:fee8:384b%xl0 prefixlen 64 scopeid 0x1
inet 192.168.1.101 netmask 0xffffff00 broadcast 255.255.255.255
xl1: flags=8a43<UP,BROADCAST,RUNNING,ALLMULTI,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:60:97:be:ca:2a
priority: 0
media: Ethernet autoselect (none)
status: no carrier
inet 192.168.0.1 netmask 0xffffff00 broadcast 192.168.0.255
inet6 fe80::260:97ff:febe:ca2a%xl1 prefixlen 64 scopeid 0x2
enc0: flags=0<>
priority: 0
groups: enc
status: active
pflog0: flags=141<UP,RUNNING,PROMISC> mtu 33200
priority: 0
groups: pflog
*********************** ping_cliente ******************
--- 192.168.0.10 ping statistics ---
3 packets transmitted, 0 packets received, 100.0% packet loss
/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
//////////////////////////// INFORMATION CLIENTE
////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
********** dmesg ***********
OpenBSD 4.7 (GENERIC) #558: Wed Mar 17 20:46:15 MDT 2010
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Mobile AMD Athlon(tm) 4 processor ("AuthenticAMD" 686-class,
256KB L2 cache) 1 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem = 502820864 (479MB)
avail mem = 478490624 (456MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 01/16/04, BIOS32 rev. 0 @
0xfbc70, SMBIOS rev. 2.3 @ 0xf0800 (33 entries)
bios0: vendor Phoenix Technologies, LTD version "6.00 PG" date 01/16/2004
bios0: MICRO-STAR INTERNATIONAL CO., LTD KM400-8235
apm0 at bios0: Power Management spec V1.2 (slowidle)
apm0: AC on, battery charge unknown
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xde94
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfddf0/160 (8 entries)
pcibios0: PCI Exclusive IRQs: 5 10 11
pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT82C596A ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x7e00
cpu0 at mainbus0: (uniprocessor)
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "VIA VT8378 PCI" rev 0x00
viaagp0 at pchb0: v3
agp0 at viaagp0: aperture at 0xd0000000, size 0x10000000
ppb0 at pci0 dev 1 function 0 "VIA VT8377 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "VIA VT8378 VGA" rev 0x01
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x80: irq 11
uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x80: irq 11
uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x80: irq 10
ehci0 at pci0 dev 16 function 3 "VIA VT6202 USB" rev 0x82: irq 5
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "VIA EHCI root hub" rev 2.00/1.00 addr 1
viapm0 at pci0 dev 17 function 0 "VIA VT8235 ISA" rev 0x00
iic0 at viapm0
iic0: addr 0x2f 04=00 06=03 07=00 0c=00 0d=07 0e=85 0f=00 10=c4 11=10
12=00 13=60 14=14 15=62 16=01 17=06 words 00=ffff 01=ffff 02=ffff
03=ffff 04=00ff 05=ffff 06=03ff 07=00ff
spdmem0 at iic0 addr 0x50: 256MB DDR SDRAM non-parity PC2700CL2.5
spdmem1 at iic0 addr 0x51: 256MB DDR SDRAM non-parity PC3200CL3.0
pciide0 at pci0 dev 17 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133,
channel 0 configured to compatibility, channel 1 configured to
compatibility
wd0 at pciide0 channel 0 drive 0: <Maxtor 2B020H1>
wd0: 16-sector PIO, LBA48, 19541MB, 40020624 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
pciide0: channel 1 disabled (no drives)
auvia0 at pci0 dev 17 function 5 "VIA VT8233 AC97" rev 0x50: irq 10
ac97: codec id 0x414c4760 (Avance Logic ALC655 rev 0)
audio0 at auvia0
vr0 at pci0 dev 18 function 0 "VIA RhineII-2" rev 0x74: irq 11,
address 00:0c:76:bb:00:5a
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 8: OUI
0x004063, model 0x0032
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "VIA UHCI root hub" rev 1.00/1.00 addr 1
isa0 at mainbus0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
wbsio0 at isa0 port 0x2e/2: W83697HF rev 0x12
lm1 at wbsio0 port 0x290/8: W83697HF
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask ef6d netmask ef6d ttymask ffff
mtrr: Pentium Pro MTRR support
vscsi0 at root
scsibus0 at vscsi0: 256 targets
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
*********ifconfig ******************
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 33200
priority: 0
groups: lo
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
vr0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:0c:76:bb:00:5a
priority: 0
groups: egress
media: Ethernet autoselect (none)
status: no carrier
inet 192.168.0.10 netmask 0xffffff00 broadcast 192.168.0.255
inet6 fe80::20c:76ff:febb:5a%vr0 prefixlen 64 scopeid 0x1
enc0: flags=0<> mtu 1536
priority: 0
*************** netstat_rn *************
Routing tables
Internet:
Destination Gateway Flags Refs Use Mtu Prio Iface
default 192.168.0.1 GS 0 32 - 8 vr0
127/8 127.0.0.1 UGRS 0 0 33200 8 lo0
127.0.0.1 127.0.0.1 UH 1 360 33200 4 lo0
192.168.0/24 link#1 C 1 0 - 4 vr0
192.168.0.1 link#1 HLc 1 0 - 4 vr0
224/4 127.0.0.1 URS 0 0 33200 8 lo0
Internet6:
Destination Gateway
Flags Refs Use Mtu Prio Iface
::/104 ::1 UGRS
0 0 - 8 lo0
::/96 ::1 UGRS
0 0 - 8 lo0
::1 ::1 UH
14 0 33200 4 lo0
::127.0.0.0/104 ::1 UGRS
0 0 - 8 lo0
::224.0.0.0/100 ::1 UGRS
0 0 - 8 lo0
::255.0.0.0/104 ::1 UGRS
0 0 - 8 lo0
::ffff:0.0.0.0/96 ::1 UGRS
0 0 - 8 lo0
2002::/24 ::1 UGRS
0 0 - 8 lo0
2002:7f00::/24 ::1 UGRS
0 0 - 8 lo0
2002:e000::/20 ::1 UGRS
0 0 - 8 lo0
2002:ff00::/24 ::1 UGRS
0 0 - 8 lo0
fe80::/10 ::1 UGRS
0 0 - 8 lo0
fe80::%vr0/64 link#1 C
0 0 - 4 vr0
fe80::20c:76ff:febb:5a%vr0 00:0c:76:bb:00:5a HL
0 0 - 4 lo0
fe80::%lo0/64 fe80::1%lo0 U
0 0 - 4 lo0
fe80::1%lo0 link#3 UHL
0 0 - 4 lo0
fec0::/10 ::1 UGRS
0 0 - 8 lo0
ff01::/16 ::1 UGRS
0 0 - 8 lo0
ff01::%vr0/32 link#1 C
0 0 - 4 vr0
ff01::%lo0/32 ::1 UC
0 0 - 4 lo0
ff02::/16 ::1 UGRS
0 0 - 8 lo0
ff02::%vr0/32 link#1 C
0 0 - 4 vr0
ff02::%lo0/32 ::1 UC
0 0 - 4 lo0
***********ping_gateway*************
--- 192.168.0.1 ping statistics ---
3 packets transmitted, 0 packets received, 100.0% packet loss
****************ping_router_exterior****************
--- 192.168.1.1 ping statistics ---
3 packets transmitted, 0 packets received, 100.0% packet loss
********************route**********************
Routing tables
Internet:
Destination Gateway Flags Refs Use Mtu Prio Iface
default 192.168.1.1 GS 0 0 - 8 vr0
loopback localhost UGRS 0 0 33200 8 lo0
localhost localhost UH 1 0 33200 4 lo0
192.168.1/24 link#1 C 2 0 - 4 vr0
192.168.1.1 link#1 HLc 1 0 - 4 vr0
192.168.1.200 link#1 HLc 0 0 - 4 vr0
BASE-ADDRESS.MCAST localhost URS 0 0 33200 8 lo0
Internet6:
Destination Gateway Flags Refs Use Mtu Prio Iface
::/104 localhost UGRS 0 0 - 8 lo0
::/96 localhost UGRS 0 0 - 8 lo0
localhost localhost UH 14 0 33200 4 lo0
::127.0.0.0/104 localhost UGRS 0 0 - 8 lo0
::224.0.0.0/100 localhost UGRS 0 0 - 8 lo0
::255.0.0.0/104 localhost UGRS 0 0 - 8 lo0
::ffff:0.0.0.0/96 localhost UGRS 0 0 - 8 lo0
2002::/24 localhost UGRS 0 0 - 8 lo0
2002:7f00::/24 localhost UGRS 0 0 - 8 lo0
2002:e000::/20 localhost UGRS 0 0 - 8 lo0
2002:ff00::/24 localhost UGRS 0 0 - 8 lo0
fe80::/10 localhost UGRS 0 0 - 8 lo0
fe80::%vr0/64 link#1 C 0 0 - 4 vr0
fe80::20c:76ff:feb 00:0c:76:bb:00:5a HL 0 0 - 4 lo0
fe80::%lo0/64 fe80::1%lo0 U 0 0 - 4 lo0
fe80::1%lo0 link#3 UHL 0 0 - 4 lo0
fec0::/10 localhost UGRS 0 0 - 8 lo0
ff01::/16 localhost UGRS 0 0 - 8 lo0
ff01::%vr0/32 link#1 C 0 0 - 4 vr0
ff01::%lo0/32 localhost UC 0 0 - 4 lo0
ff02::/16 localhost UGRS 0 0 - 8 lo0
ff02::%vr0/32 link#1 C 0 0 - 4 vr0
ff02::%lo0/32 localhost UC 0 0 - 4 lo0
