On 29-Nov-10 18:52, Scott Stanley wrote:
Someone gave me a bunch of HP Proliant DL360 G3 servers, so I promptly
went to install 4.8 i386 on one to see if it was worth keeping.
(I'm just playing around at home with these)
Installer makes it all the way to installation set(s) location, then
kernel says:
ASC/ASCQ: ASC 0X20 ASCQ 0X00
cd0(atapiscsi0:0:0): Check condition (error 0x70) on opcode 0x20
SENSE KEY: Illegal Request
ASC/ASCQ: ASC 0X20 ASCQ 0X00
followed by installer saying:
No filesystems found on cd0
This fellow had the same issue, and there was no resolution that I could see.
http://www.mail-archive.com/misc@openbsd.org/msg50451.html
My attempt was done using an official i386 disc that has installed 4.8
on 2 other systems, so I know the disc is good. OR, is there a
possibility that the disc is marginal and the drive is picky enough to
complain? I tried this on 3 or 4 of the systems and got the same
error.
Is there any more information I can provide for clues to help?
-Scott
What CD-ROM drive do you have installed on these systems? The 360 G3s
shipped with a couple different models, some are excellent units, others
are complete crap.
You may also try ejecting the drive and re-inserting it. Some
production runs of the 360s weren't constructed properly and the IDE
backplane will fail.
