Alright, I see this in faq, sorry by my fault I will include this in next time
Thanks Theo 2010/11/22 Theo de Raadt <dera...@cvs.openbsd.org> > > OpenBSD 4.8 (GENERIC.MP) #335: Mon Aug 16 09:09:20 MDT 2010 > > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > > real mem = 2112618496 (2014MB) > > avail mem = 2042560512 (1947MB) > > mainbus0 at root > > bios0 at mainbus0: SMBIOS rev. 2.3 @ 0xfbf60 (49 entries) > > bios0: vendor American Megatrends Inc. version "080012" date 03/07/2006 > > bios0: ECS P4M800PRO-M > > acpi0 at bios0: rev 0 > > acpi0: sleep states S0 S1 S4 S5 > > acpi0: tables DSDT FACP APIC OEMB > > acpi0: wakeup devices UAR1(S4) MC97(S4) USB1(S1) USB2(S1) USB3(S1) > USB4(S1) > > PCI1(S4) PCI2(S4) PCI3(S4) OLAN(S4) ILAN(S4) SLPB(S4) PWRB(S4) > > acpitimer0 at acpi0: 3579545 Hz, 24 bits > > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > > cpu0 at mainbus0: apid 0 (boot processor) > > cpu0: Intel(R) Pentium(R) D CPU 2.80GHz, 2795.01 MHz > > cpu0: > > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,CNXT-ID,CX16,xTPR,LONG > > cpu0: 1MB 64b/line 8-way L2 cache > > cpu0: apic clock running at 199MHz > > cpu1 at mainbus0: apid 1 (application processor) > > cpu1: Intel(R) Pentium(R) D CPU 2.80GHz, 2794.56 MHz > > cpu1: > > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,CNXT-ID,CX16,xTPR,LONG > > cpu1: 1MB 64b/line 8-way L2 cache > > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 3, 24 pins > > ioapic0: misconfigured as apic 1, remapped to apid 2 > > acpiprt0 at acpi0: bus 0 (PCI0) > > acpiprt1 at acpi0: bus 1 (P0P1) > > acpicpu0 at acpi0acpi0: unable to load \\_PR_.CPU1.SSDT > > > > acpicpu1 at acpi0acpi0: unable to load \\_PR_.CPU2.SSDT > > > > acpitz0 at acpi0: critical temperature 110 degC > > acpibtn0 at acpi0: SLPB > > acpibtn1 at acpi0: PWRB > > pci0 at mainbus0 bus 0 > > pchb0 at pci0 dev 0 function 0 "VIA CN700 Host" rev 0x00 > > agp at pchb0 not configured > > pchb1 at pci0 dev 0 function 1 "VIA CN700 Host" rev 0x00 > > pchb2 at pci0 dev 0 function 2 "VIA CN700 Host" rev 0x00 > > pchb3 at pci0 dev 0 function 3 "VIA PT890 Host" rev 0x00 > > pchb4 at pci0 dev 0 function 4 "VIA CN700 Host" rev 0x00 > > pchb5 at pci0 dev 0 function 7 "VIA CN700 Host" rev 0x00 > > ppb0 at pci0 dev 1 function 0 "VIA VT8377 AGP" rev 0x00 > > pci1 at ppb0 bus 1 > > vga1 at pci1 dev 0 function 0 "VIA S3 Unichrome PRO IGP" rev 0x01 > > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > > rl0 at pci0 dev 8 function 0 "Realtek 8139" rev 0x10: apic 2 int 16 (irq > > 10), address 00:1a:3f:51:72:3d > > rlphy0 at rl0 phy 0: RTL internal PHY > > rl1 at pci0 dev 9 function 0 "Realtek 8139" rev 0x10: apic 2 int 17 (irq > > 11), address 00:1a:3f:51:46:59 > > rlphy1 at rl1 phy 0: RTL internal PHY > > rl2 at pci0 dev 10 function 0 "Realtek 8139" rev 0x10: apic 2 int 18 (irq > > 5), address 00:1a:3f:52:34:4f > > rlphy2 at rl2 phy 0: RTL internal PHY > > pciide0 at pci0 dev 15 function 0 "VIA VT6420 SATA" rev 0x80: DMA > > pciide0: using apic 2 int 20 (irq 5) for native-PCI interrupt > > wd0 at pciide0 channel 0 drive 0: <SAMSUNG HD082GJ> > > wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors > > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6 > > pciide1 at pci0 dev 15 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133, > > channel 0 configured to compatibility, channel 1 configured to > compatibility > > pciide1: channel 0 disabled (no drives) > > pciide1: channel 1 disabled (no drives) > > uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x81: apic 2 int > 21 > > (irq 10) > > uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x81: apic 2 int > 21 > > (irq 10) > > uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x81: apic 2 int > 21 > > (irq 11) > > uhci3 at pci0 dev 16 function 3 "VIA VT83C572 USB" rev 0x81: apic 2 int > 21 > > (irq 11) > > ehci0 at pci0 dev 16 function 4 "VIA VT6202 USB" rev 0x86: apic 2 int 21 > > (irq 5) > > usb0 at ehci0: USB revision 2.0 > > uhub0 at usb0 "VIA EHCI root hub" rev 2.00/1.00 addr 1 > > viapm0 at pci0 dev 17 function 0 "VIA VT8237 ISA" rev 0x00 > > iic0 at viapm0 > > spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5 > > spdmem1 at iic0 addr 0x51: 1GB DDR2 SDRAM non-parity PC2-5300CL5 > > vr0 at pci0 dev 18 function 0 "VIA RhineII-2" rev 0x78: apic 2 int 23 > (irq > > 10), address 00:16:ec:82:1c:3b > > ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 10: OUI > > 0x004063, model 0x0032 > > usb1 at uhci0: USB revision 1.0 > > uhub1 at usb1 "VIA UHCI root hub" rev 1.00/1.00 addr 1 > > usb2 at uhci1: USB revision 1.0 > > uhub2 at usb2 "VIA UHCI root hub" rev 1.00/1.00 addr 1 > > usb3 at uhci2: USB revision 1.0 > > uhub3 at usb3 "VIA UHCI root hub" rev 1.00/1.00 addr 1 > > usb4 at uhci3: USB revision 1.0 > > uhub4 at usb4 "VIA UHCI root hub" rev 1.00/1.00 addr 1 > > isa0 at mainbus0 > > isadma0 at isa0 > > pckbc0 at isa0 port 0x60/5 > > pckbd0 at pckbc0 (kbd slot) > > pckbc0: using irq 1 for kbd slot > > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > > pcppi0 at isa0 port 0x61 > > spkr0 at pcppi0 > > it0 at isa0 port 0x2e/2: IT8705F rev 3, EC port 0x290 > > mtrr: Pentium Pro MTRR support > > softraid0 at root > > root on wd0a swap on wd0b dump on wd0b > > kernel: protection fault trap, code=0 > > Stopped at pool_do_get+0x133: movq %rax,0x10(%rcx) > > > > > > This occurred 2 times between 2 days > > > > No, that is not what happened. I bet the next thing it said is: > > RUN AT LEAST 'trace' AND 'ps' AND INCLUDE OUTPUT WHEN REPORTING THIS PANIC! > DO NOT EVEN BOTHER REPORTING THIS WITHOUT INCLUDING THAT INFORMATION! > > But you decided you are special, and don't want us to help us help you.
