Ok here it goes:
OpenBSD 4.3 (GENERIC.MP) #587: Wed Mar 12 11:21:57 MDT 2008
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
RTC BIOS diagnostic error 80<clock_battery>
cpu0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz ("GenuineIntel"
686-class) 2.39 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
real mem = 3739484160 (3566MB)
avail mem = 3631726592 (3463MB)
RTC BIOS diagnostic error 80<clock_battery>
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 08/07/08, SMBIOS rev. 2.4 @
0xe2330 (39 entries)
bios0: vendor Intel Corp. version "JOQ3510J.86A.0942.2008.0807.1958"
date 08/07/2008
bios0: Intel Corporation DQ35MP
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP APIC WDDT MCFG ASF! DMAR ASPT WDTT SSDT SSDT
SSDT SSDT SSDT TCPA
acpi0: wakeup devices SLPB(S4) P32_(S4) UAR1(S4) ILAN(S4) PEGP(S4)
PEX0(S4) PEX1(S4) PEX2(S4) PEX3(S4) PEX4(S4) PEX5(S4) UHC1(S3) UHC2(S3)
UHC3(S3) UHC4(S3) EHCI(S3) EHC2(S3) UH42(S3) UHC5(S3) UHC6(S3) AZAL(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 265MHz
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz ("GenuineIntel"
686-class) 2.40 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
cpu2 at mainbus0: apid 1 (application processor)
cpu2: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz ("GenuineIntel"
686-class) 2.39 GHz
cpu2:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz ("GenuineIntel"
686-class) 2.39 GHz
cpu3:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
ioapic0: duplicate apic id, remapped to apid 4
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 6 (P32_)
acpiprt2 at acpi0: bus 1 (PEX0)
acpiprt3 at acpi0: bus 2 (PEX1)
acpiprt4 at acpi0: bus 3 (PEX2)
acpiprt5 at acpi0: bus 4 (PEX3)
acpiprt6 at acpi0: bus 5 (PEX4)
acpiprt7 at acpi0: bus -1 (PEX5)
acpicpu0 at acpi0: C1
acpicpu1 at acpi0: C1
acpicpu2 at acpi0: C1
acpicpu3 at acpi0: C1
acpibtn0 at acpi0: SLPB
bios0: ROM list: 0xc0000/0xb400! 0xcb800/0x2400!
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82Q35 Host" rev 0x02
vga1 at pci0 dev 2 function 0 "Intel 82Q35 Video" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Intel 82Q35 HECI" rev 0x02 at pci0 dev 3 function 0 not configured
pciide0 at pci0 dev 3 function 2 "Intel 82Q35 PT IDER" rev 0x02: DMA
(unsupported), channel 0 wired to native-PCI, channel 1 wired to native-PCI
pciide0: using apic 4 int 18 (irq 9) for native-PCI interrupt
pciide0: channel 0 ignored (not responding; disabled or no drives?)
pciide0: channel 1 ignored (not responding; disabled or no drives?)
"Intel 82Q35 KT" rev 0x02 at pci0 dev 3 function 3 not configured
em0 at pci0 dev 25 function 0 "Intel ICH9 IGP AMT" rev 0x02: apic 4 int
20 (irq 11), address 00:19:d1:b1:f2:0d
uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x02: apic 4 int
18 (irq 9)
uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x02: apic 4 int
21 (irq 9)
uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x02: apic 4 int
17 (irq 10)
ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x02: apic 4 int
17 (irq 10)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x02: apic 4 int
17 (irq 255)
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x02: apic 4 int
20 (irq 255)
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x02: apic 4 int
18 (irq 255)
pci3 at ppb2 bus 3
pciide1 at pci3 dev 0 function 0 "Marvell 88SE6101 IDE" rev 0xb1: DMA
(unsupported), channel 0 configured to native-PCI, channel 1 configured
to native-PCI
pciide1: using apic 4 int 18 (irq 9) for native-PCI interrupt
pciide1: channel 0 ignored (not responding; disabled or no drives?)
pciide1: channel 1 ignored (not responding; disabled or no drives?)
ppb3 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x02: apic 4 int
19 (irq 255)
pci4 at ppb3 bus 4
ppb4 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x02: apic 4 int
17 (irq 255)
pci5 at ppb4 bus 5
uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x02: apic 4 int
23 (irq 10)
uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x02: apic 4 int
19 (irq 11)
uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x02: apic 4 int
18 (irq 9)
ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x02: apic 4 int
23 (irq 10)
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb5 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x92
pci6 at ppb5 bus 6
ichpcib0 at pci0 dev 31 function 0 "Intel 82801IO LPC" rev 0x02: PM disabled
ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x02: apic 4 int
21 (irq 9), AHCI 1.2
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, WDC WD800BD-22MR, 10.0> SCSI3
0/direct fixed
sd0: 76319MB, 9729 cyl, 255 head, 63 sec, 512 bytes/sec, 156301488 sec total
sd1 at scsibus0 targ 1 lun 0: <ATA, WDC WD1200JD-00H, 08.0> SCSI3
0/direct fixed
sd1: 114473MB, 14593 cyl, 255 head, 63 sec, 512 bytes/sec, 234441648 sec
total
sd2 at scsibus0 targ 2 lun 0: <ATA, WDC WD3200AAKS-0, 12.0> SCSI3
0/direct fixed
sd2: 305245MB, 38913 cyl, 255 head, 63 sec, 512 bytes/sec, 625142448 sec
total
sd3 at scsibus0 targ 3 lun 0: <ATA, WDC WD3200AAKS-0, 12.0> SCSI3
0/direct fixed
sd3: 305245MB, 38913 cyl, 255 head, 63 sec, 512 bytes/sec, 625142448 sec
total
sd4 at scsibus0 targ 5 lun 0: <ATA, WDC WD800BD-22MR, 10.0> SCSI3
0/direct fixed
sd4: 76319MB, 9729 cyl, 255 head, 63 sec, 512 bytes/sec, 156301488 sec total
ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x02: apic 4
int 18 (irq 9)
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5
spdmem1 at iic0 addr 0x51: 1GB DDR2 SDRAM non-parity PC2-5300CL5
spdmem2 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-5300CL5
spdmem3 at iic0 addr 0x53: 1GB DDR2 SDRAM non-parity PC2-5300CL5
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
uhidev0 at uhub7 port 2 configuration 1 interface 0 "vendor 0x13ba
Generic USB K/B" rev 1.10/0.01 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub7 port 2 configuration 1 interface 1 "vendor 0x13ba
Generic USB K/B" rev 1.10/0.01 addr 2
uhidev1: iclass 3/1, 2 report ids
ums0 at uhidev1 reportid 1: 3 buttons and Z dir.
wsmouse0 at ums0 mux 0
uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
WARNING: / was not properly unmounted
uhidev2 at uhub6 port 2 configuration 1 interface 0 "Sun Microsystems
Type 6 Keyboard" rev 1.00/1.02 addr 2
uhidev2: iclass 3/1
ukbd1 at uhidev2: 8 modifier keys, 6 key codes, layout 33
wskbd2 at ukbd1 mux 1
wskbd2: connecting to wsdisplay0
wskbd2: disconnecting from wsdisplay0
wskbd2 detached
ukbd1 detached
uhidev2 detached
uvm_mapent_alloc: out of static map entries
uvm_mapent_alloc: out of static map entries
uvm_mapent_alloc: out of static map entries
uvm_mapent_alloc: out of static map entries
uvm_mapent_alloc: out of static map entries
uvm_mapent_alloc: out of static map entries
uvm_mapent_alloc: out of static map entries
uvm_mapent_alloc: out of static map entries
ahci0: stopping the port, softreset slot 26 was still active.
uvm_mapent_alloc: out of static map entries
uvm_mapent_alloc: out of static map entries
PP<P8QQP8P9 P&P0QQ P:P>P2 escribiC3:
> On Tue, Nov 2, 2010 at 9:01 PM, Marcos Laufer <mar...@ipv4networks.com> wrote:
>
>> Hello list,
>>
>> Does anyone know what this means? "ahci0: stopping the port, softreset slot
>> 26 was still active."
>>
>> Does this mean that ahci has been disabled and now disks are working as
>> regular sata disks?
>>
>
> What do You mean? AHCI is the SATA controller interface, which all the
> regular SATA discks work with.
>
> The message You've cited says that Your AHCI controller disabled some
> port. Unless You provide the full dmesg noone could help You with more
> details.
