Really? that's odd. Did you try it a second time later by any chance?
On Mon, Oct 25, 2010 at 04:22:45AM +0200, Niels Poppe wrote:
> On Sun, Oct 24, 2010 at 09:09:52PM -0500, Marco Peereboom wrote:
> > odd. does dmesg spit anything useful out?
>
> actually, no.
>
> for the usb stick pulling out the machine:
>
> sd0 detached
> scsibus0 detached
> umass0 detached
>
> after that, because i accessed the softraid filesystem:
>
> softraid0: retrying read on block 6704
>
> then, putting it back:
>
> umass0 at uhub0 port 1 configuration 1 interface 0 " USB DISK 2.0" rev
> 2.00/1.00 addr 2
> umass0: using SCSI over Bulk-Only
> scsibus0 at umass0: 2 targets, initiator 0
> sd0 at scsibus0 targ 1 lun 0: <, USB DISK 2.0, PMAP> SCSI0 0/direct removable
> sd0: 3814MB, 512 bytes/sec, 7811072 sec total
>
> and nothing further. the bioctl command errs out without any logging.
>
> i'll attach /var/run/dmesg.boot
> OpenBSD 4.8-current (GENERIC.MP) #0: Tue Oct 12 20:18:07 MDT 2010
> r...@router.lan:/usr/src/sys/arch/i386/compile/GENERIC.MP
> cpu0: Genuine Intel(R) CPU N270 @ 1.60GHz ("GenuineIntel" 686-class) 1.60 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,xTPR,PDCM,MOVBE
> real mem = 1064660992 (1015MB)
> avail mem = 1037225984 (989MB)
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 05/24/10, BIOS32 rev. 0 @ 0xf0010,
> SMBIOS rev. 2.4 @ 0xfd120 (19 entries)
> bios0: vendor American Megatrends Inc. version "080015" date 05/24/2010
> bios0: AOpen i945GSEx-QS R2.00 May.24.2010
> acpi0 at bios0: rev 2
> acpi0: sleep states S0 S3 S4 S5
> acpi0: tables DSDT FACP APIC MCFG SLIC OEMB SSDT
> acpi0: wakeup devices P0P2(S4) LAN_(S4) P0P1(S4) USB0(S4) USB1(S4) USB2(S4)
> USB3(S4) EUSB(S4) MC97(S4) P0P4(S4) P0P5(S4) P0P6(S4) P0P7(S4) P0P8(S4)
> P0P9(S4)
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: apic clock running at 133MHz
> cpu1 at mainbus0: apid 1 (application processor)
> cpu1: Genuine Intel(R) CPU N270 @ 1.60GHz ("GenuineIntel" 686-class) 1.60 GHz
> cpu1:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,xTPR,PDCM,MOVBE
> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
> ioapic0: misconfigured as apic 1, remapped to apid 2
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus -1 (P0P2)
> acpiprt2 at acpi0: bus 4 (P0P1)
> acpiprt3 at acpi0: bus 2 (P0P5)
> acpiprt4 at acpi0: bus 3 (P0P6)
> acpiprt5 at acpi0: bus -1 (P0P7)
> acpiprt6 at acpi0: bus -1 (P0P8)
> acpiprt7 at acpi0: bus -1 (P0P9)
> acpicpu0 at acpi0: C3, C2, C1, PSS
> acpicpu1 at acpi0: C3, C2, C1, PSS
> acpibtn0 at acpi0: SLPB
> acpibtn1 at acpi0: PWRB
> acpivideo0 at acpi0: IGD_
> acpivout0 at acpivideo0: DD01
> acpivout1 at acpivideo0: DD02
> acpivout2 at acpivideo0: DD03
> acpivout3 at acpivideo0: DD04
> bios0: ROM list: 0xc0000/0xec00!
> cpu0: Enhanced SpeedStep 1597 MHz: speeds: 1600, 1333, 1067, 800 MHz
> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82945GME Host" rev 0x03
> vga1 at pci0 dev 2 function 0 "Intel 82945GME Video" rev 0x03
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> intagp0 at vga1
> agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
> inteldrm0 at vga1: apic 2 int 16 (irq 10)
> drm0 at inteldrm0
> "Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
> azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: apic 2
> int 16 (irq 10)
> azalia0: codecs: Realtek ALC662
> audio0 at azalia0
> ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 2 int 16
> (irq 10)
> pci1 at ppb0 bus 1
> ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 2 int 17
> (irq 11)
> pci2 at ppb1 bus 2
> re0 at pci2 dev 0 function 0 "Realtek 8168" rev 0x03: RTL8168D/8111D
> (0x2800), apic 2 int 17 (irq 11), address 00:01:80:7a:b8:71
> rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2
> ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02: apic 2 int 18
> (irq 5)
> pci3 at ppb2 bus 3
> re1 at pci3 dev 0 function 0 "Realtek 8168" rev 0x03: RTL8168D/8111D
> (0x2800), apic 2 int 18 (irq 5), address 00:01:80:7a:b8:70
> rgephy1 at re1 phy 7: RTL8169S/8110S PHY, rev. 2
> uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 2 int 23
> (irq 7)
> uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 2 int 19
> (irq 10)
> uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 2 int 18
> (irq 5)
> uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 2 int 16
> (irq 10)
> ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 2 int 23
> (irq 7)
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
> pci4 at ppb3 bus 4
> ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled
> pciide0 at pci0 dev 31 function 2 "Intel 82801GBM SATA" rev 0x02: DMA,
> channel 0 wired to compatibility, channel 1 wired to compatibility
> wd0 at pciide0 channel 0 drive 0: <OCZ-ONYX>
> wd0: 1-sector PIO, LBA48, 30533MB, 62533296 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6
> wd1 at pciide0 channel 1 drive 0: <Sony NCFD2G>
> wd1: 1-sector PIO, LBA, 1911MB, 3915072 sectors
> wd1(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5
> ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 2 int
> 19 (irq 10)
> iic0 at ichiic0
> iic0: addr 0x26 00=c8 01=8c 10=13 11=09 12=c7 13=09 14=63 5a=09 5b=05 5c=20
> 5d=19 5e=34 words 00=c8ff 01=8cff 02=ffff 03=ffff 04=ffff 05=ffff 06=ffff
> 07=ffff
> spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
> usb1 at uhci0: USB revision 1.0
> uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb2 at uhci1: USB revision 1.0
> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb3 at uhci2: USB revision 1.0
> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb4 at uhci3: USB revision 1.0
> uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> isa0 at ichpcib0
> isadma0 at isa0
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> com0: console
> com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> com1: probed fifo depth: 15 bytes
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> mtrr: Pentium Pro MTRR support
> umass0 at uhub0 port 1 configuration 1 interface 0 " USB DISK 2.0" rev
> 2.00/1.00 addr 2
> umass0: using SCSI over Bulk-Only
> scsibus0 at umass0: 2 targets, initiator 0
> sd0 at scsibus0 targ 1 lun 0: <, USB DISK 2.0, PMAP> SCSI0 0/direct removable
> sd0: 3814MB, 512 bytes/sec, 7811072 sec total
> umass1 at uhub0 port 2 configuration 1 interface 0 " USB DISK 2.0" rev
> 2.00/1.00 addr 3
> umass1: using SCSI over Bulk-Only
> scsibus1 at umass1: 2 targets, initiator 0
> sd1 at scsibus1 targ 1 lun 0: <, USB DISK 2.0, PMAP> SCSI0 0/direct removable
> sd1: 3814MB, 512 bytes/sec, 7811072 sec total
> vscsi0 at root
> scsibus2 at vscsi0: 256 targets
> softraid0 at root
> scsibus3 at softraid0: 1 targets
> sd2 at scsibus3 targ 0 lun 0: <OPENBSD, SR RAID 1, 004> SCSI2 0/direct fixed
> sd2: 3812MB, 512 bytes/sec, 7807448 sec total
> root on wd1a swap on wd1b dump on wd1b
> syncing disks... done
> sd2 detached
> scsibus3 detached
> r
> OpenBSD 4.8-current (GENERIC.MP) #0: Tue Oct 12 20:18:07 MDT 2010
> r...@router.lan:/usr/src/sys/arch/i386/compile/GENERIC.MP
> cpu0: Genuine Intel(R) CPU N270 @ 1.60GHz ("GenuineIntel" 686-class) 1.60 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,xTPR,PDCM,MOVBE
> real mem = 1064660992 (1015MB)
> avail mem = 1037225984 (989MB)
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 05/24/10, BIOS32 rev. 0 @ 0xf0010,
> SMBIOS rev. 2.4 @ 0xfd120 (19 entries)
> bios0: vendor American Megatrends Inc. version "080015" date 05/24/2010
> bios0: AOpen i945GSEx-QS R2.00 May.24.2010
> acpi0 at bios0: rev 2
> acpi0: sleep states S0 S3 S4 S5
> acpi0: tables DSDT FACP APIC MCFG SLIC OEMB SSDT
> acpi0: wakeup devices P0P2(S4) LAN_(S4) P0P1(S4) USB0(S4) USB1(S4) USB2(S4)
> USB3(S4) EUSB(S4) MC97(S4) P0P4(S4) P0P5(S4) P0P6(S4) P0P7(S4) P0P8(S4)
> P0P9(S4)
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: apic clock running at 133MHz
> cpu1 at mainbus0: apid 1 (application processor)
> cpu1: Genuine Intel(R) CPU N270 @ 1.60GHz ("GenuineIntel" 686-class) 1.60 GHz
> cpu1:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,xTPR,PDCM,MOVBE
> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
> ioapic0: misconfigured as apic 1, remapped to apid 2
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus -1 (P0P2)
> acpiprt2 at acpi0: bus 4 (P0P1)
> acpiprt3 at acpi0: bus 2 (P0P5)
> acpiprt4 at acpi0: bus 3 (P0P6)
> acpiprt5 at acpi0: bus -1 (P0P7)
> acpiprt6 at acpi0: bus -1 (P0P8)
> acpiprt7 at acpi0: bus -1 (P0P9)
> acpicpu0 at acpi0: C3, C2, C1, PSS
> acpicpu1 at acpi0: C3, C2, C1, PSS
> acpibtn0 at acpi0: SLPB
> acpibtn1 at acpi0: PWRB
> acpivideo0 at acpi0: IGD_
> acpivout0 at acpivideo0: DD01
> acpivout1 at acpivideo0: DD02
> acpivout2 at acpivideo0: DD03
> acpivout3 at acpivideo0: DD04
> bios0: ROM list: 0xc0000/0xec00!
> cpu0: Enhanced SpeedStep 1597 MHz: speeds: 1600, 1333, 1067, 800 MHz
> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82945GME Host" rev 0x03
> vga1 at pci0 dev 2 function 0 "Intel 82945GME Video" rev 0x03
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> intagp0 at vga1
> agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
> inteldrm0 at vga1: apic 2 int 16 (irq 10)
> drm0 at inteldrm0
> "Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
> azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: apic 2
> int 16 (irq 10)
> azalia0: codecs: Realtek ALC662
> audio0 at azalia0
> ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 2 int 16
> (irq 10)
> pci1 at ppb0 bus 1
> ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 2 int 17
> (irq 11)
> pci2 at ppb1 bus 2
> re0 at pci2 dev 0 function 0 "Realtek 8168" rev 0x03: RTL8168D/8111D
> (0x2800), apic 2 int 17 (irq 11), address 00:01:80:7a:b8:71
> rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2
> ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02: apic 2 int 18
> (irq 5)
> pci3 at ppb2 bus 3
> re1 at pci3 dev 0 function 0 "Realtek 8168" rev 0x03: RTL8168D/8111D
> (0x2800), apic 2 int 18 (irq 5), address 00:01:80:7a:b8:70
> rgephy1 at re1 phy 7: RTL8169S/8110S PHY, rev. 2
> uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 2 int 23
> (irq 7)
> uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 2 int 19
> (irq 10)
> uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 2 int 18
> (irq 5)
> uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 2 int 16
> (irq 10)
> ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 2 int 23
> (irq 7)
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
> pci4 at ppb3 bus 4
> ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled
> pciide0 at pci0 dev 31 function 2 "Intel 82801GBM SATA" rev 0x02: DMA,
> channel 0 wired to compatibility, channel 1 wired to compatibility
> wd0 at pciide0 channel 0 drive 0: <OCZ-ONYX>
> wd0: 1-sector PIO, LBA48, 30533MB, 62533296 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6
> wd1 at pciide0 channel 1 drive 0: <Sony NCFD2G>
> wd1: 1-sector PIO, LBA, 1911MB, 3915072 sectors
> wd1(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5
> ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 2 int
> 19 (irq 10)
> iic0 at ichiic0
> iic0: addr 0x26 00=c8 01=8c 10=13 11=09 12=c7 13=09 14=63 5a=09 5b=05 5c=20
> 5d=19 5e=34 words 00=c8ff 01=8cff 02=ffff 03=ffff 04=ffff 05=ffff 06=ffff
> 07=ffff
> spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
> usb1 at uhci0: USB revision 1.0
> uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb2 at uhci1: USB revision 1.0
> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb3 at uhci2: USB revision 1.0
> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb4 at uhci3: USB revision 1.0
> uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> isa0 at ichpcib0
> isadma0 at isa0
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> com0: console
> com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> com1: probed fifo depth: 15 bytes
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> mtrr: Pentium Pro MTRR support
> umass0 at uhub0 port 1 configuration 1 interface 0 " USB DISK 2.0" rev
> 2.00/1.00 addr 2
> umass0: using SCSI over Bulk-Only
> scsibus0 at umass0: 2 targets, initiator 0
> sd0 at scsibus0 targ 1 lun 0: <, USB DISK 2.0, PMAP> SCSI0 0/direct removable
> sd0: 3814MB, 512 bytes/sec, 7811072 sec total
> umass1 at uhub0 port 2 configuration 1 interface 0 " USB DISK 2.0" rev
> 2.00/1.00 addr 3
> umass1: using SCSI over Bulk-Only
> scsibus1 at umass1: 2 targets, initiator 0
> sd1 at scsibus1 targ 1 lun 0: <, USB DISK 2.0, PMAP> SCSI0 0/direct removable
> sd1: 3814MB, 512 bytes/sec, 7811072 sec total
> vscsi0 at root
> scsibus2 at vscsi0: 256 targets
> softraid0 at root
> scsibus3 at softraid0: 1 targets
> sd2 at scsibus3 targ 0 lun 0: <OPENBSD, SR RAID 1, 004> SCSI2 0/direct fixed
> sd2: 3812MB, 512 bytes/sec, 7807448 sec total
> root on wd1a swap on wd1b dump on wd1b
