On Thu, Oct 28, 2010 at 12:55 PM, Zhang Weiwu <zhangwe...@realss.com> wrote: > > > --On Thursday, October 28, 2010 10:43:33 AM +0300 Tomas Bodzar > <tomas.bod...@gmail.com> wrote: > >> Hi, >> >> can you try latest snapshot > > 4.8 will be released in a few weeks would it be okay to wait a few days and > try that version insead?
Yes, no problem. I'm using just snapshots on PCs because of binary upgrades of system and packages, security patches incorporated and so on, but it's just my personal view. > >> for now send at least dmesg , pcidump >> -v and usbdevs outputs? Anyway try debug run of ifconfig too. Yep I just thought that it can be connected to USB bus > > pcidump is pretty length, so I'll copy the part related to this device, and > will post other parts too under request. dmesg is posted full because I am > not sure which part is relevent. usbdev I guess is not revelent because when > the problem occure nothing is plugged on the USB ports. > > # pcidump -v > [snip] > 0:6:0: Intersil Prism GT/Duette > B B B 0x0000: Vendor ID: 1260 Product ID: 3890 > B B B 0x0004: Command: 0116 Status ID: 0298 > B B B 0x0008: Class: 02 Subclass: 80 Interface: 00 Revision: 01 > B B B 0x000c: BIST: 00 Header Type: 00 Latency Timer: 50 Cache Line Size: 08 > B B B 0x0010: BAR mem 32bit addr: 0xe8000000 > B B B 0x0014: BAR empty (00000000) > B B B 0x0018: BAR empty (00000000) > B B B 0x001c: BAR empty (00000000) > B B B 0x0020: BAR empty (00000000) > B B B 0x0024: BAR empty (00000000) > B B B 0x0028: Cardbus CIS: 00000801 > B B B 0x002c: Subsystem Vendor ID: 1468 Product ID: 0210 > B B B 0x0030: Expansion ROM Base Address: 00000000 > B B B 0x0038: 00000000 > B B B 0x003c: Interrupt Pin: 01 Line: 04 Min Gnt: 0a Max Lat: 1c > B B B 0x00dc: Capability 0x01: Power Management > [snip] > This may be a problem as http://www.openbsd.org/cgi-bin/man.cgi?query=pgt&apropos=0&sektion=0&manpath= OpenBSD+Current&arch=i386&format=html man page says in CAVEATS section that it's better to turn of Power savings for device (as it's true for most of others) > You asked for debug run of ifconfig. In my case they didn't give any output: > > # ifconfig pgt0 192.168.1.100 nwid ZWW_SOHO nwkey 0x82552825ea debug > # (no output) > > And resulted 2 new lines in /var/log/messages: > > Oct 28 17:47:16 tobago /bsd: pgt0: associated with ff:ff:ff:ff:ff:ff ssid > "ZWW_S > OHO" channel 11 start 1Mb short preamble long slot time > Oct 28 17:47:16 tobago /bsd: pgt0: no recent beacons from ff:ff:ff:ff:ff:ff; > res > canning > > # ifconfig pgt0 scan debug > # (no output) > > resulted 1 line in /var/log/messages: > > Oct 28 17:47:33 tobago /bsd: pgt0: associated with ff:ff:ff:ff:ff:ff ssid > "ZWW_S > OHO" channel 11 start 1Mb short preamble long slot time > > and output of ifconfig alone: > > # ifconfig pgt0 > pgt0: flags=8847<UP,BROADCAST,DEBUG,RUNNING,SIMPLEX,MULTICAST> mtu 1500 > B B B lladdr 00:0e:9b:1f:ca:a7 > B B B priority: 4 > B B B groups: wlan > B B B media: IEEE802.11 autoselect (OFDM54) > B B B status: active > B B B ieee80211: nwid ZWW_SOHO chan 11 bssid 00:1f:c6:21:41:f4 nwkey > 0x82552825ea 100dBm > B B B inet6 fe80::20e:9bff:fe1f:caa7%pgt0 prefixlen 64 scopeid 0x4 > B B B inet 192.168.1.100 netmask 0xffffff00 broadcast 192.168.1.255 > > dmesg is the last to give thanks to its length: > > OpenBSD 4.7 (GENERIC) #558: Wed Mar 17 20:46:15 MDT 2010 > B dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC > cpu0: Transmeta Efficeon(tm) Processor TM8000 ("GenuineTMx86" 686-class) 1 > GHz > cpu0: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACP I,MMX,FXSR,SSE,SSE2,SS,TM > real mem B = 510160896 (486MB) > avail mem = 485601280 (463MB) > mainbus0 at root > bios0 at mainbus0: AT/286+ BIOS, date 08/26/04, BIOS32 rev. 0 @ 0xfd740, > SMBIOS rev. 2.31 @ 0xf2d00 (29 entries) > bios0: vendor Phoenix Technologies LTD version "6.00 > ;1.07.000;0D-03-01-01-03-00" date 08/26/2004 > bios0: SHARP Corporation PC-MM Series > apm0 at bios0: Power Management spec V1.2 > apm0: AC on, battery charge unknown > acpi at bios0 function 0x0 not configured > pcibios0 at bios0: rev 2.1 @ 0xfd740/0x8c0 > pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf10/208 (11 entries) > pcibios0: PCI Interrupt Router at 000:03:0 ("Acer Labs M1533 ISA" rev 0x00) > pcibios0: PCI bus #3 is the last bus > bios0: ROM list: 0xc0000/0xc000 0xdc000/0x6000! > cpu0 at mainbus0: (uniprocessor) > pci0 at mainbus0 bus 0: configuration mode 1 (bios) > mem address conflict 0x1e700000/0x1000 > pchb0 at pci0 dev 0 function 0 vendor "Transmeta", unknown product 0x0060 > rev 0x00 > agp at pchb0 not configured > ppb0 at pci0 dev 1 function 0 vendor "Transmeta", unknown product 0x0061 rev > 0x00 > pci1 at ppb0 bus 1 > vga1 at pci1 dev 0 function 0 "ATI Radeon Mobility M6" rev 0x00 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > radeondrm0 at vga1: irq 10 > drm0 at radeondrm0 > ppb1 at pci0 dev 2 function 0 "Acer Labs M5249 PCI-PCI" rev 0x00 > pci2 at ppb1 bus 2 > pcib0 at pci0 dev 3 function 0 "Acer Labs M1563 ISA" rev 0x20 > alipm0 at pci0 dev 3 function 1 "Acer Labs M7101 Power" rev 0x00: SMBus > disabled > auacer0 at pci0 dev 4 function 0 "Acer Labs M5455 Audio" rev 0x03: irq 5 > ac97: codec id 0x414c4740 (Avance Logic ALC202) > ac97: codec features headphone, 20 bit DAC, 18 bit ADC, Realtek 3D > audio0 at auacer0 > pgt0 at pci0 dev 6 function 0 "Intersil Prism GT/Duette" rev 0x01: irq 4 > cbb0 at pci0 dev 9 function 0 "Ricoh 5C475 CardBus" rev 0x81can't map > registers > rl0 at pci0 dev 10 function 0 "Realtek 8139" rev 0x10: irq 3, address > 08:00:1f:bf:4b:d6 > rlphy0 at rl0 phy 0: RTL internal PHY > pciide0 at pci0 dev 14 function 0 "Acer Labs M5229 UDMA IDE" rev 0xc5: DMA, > channel 0 configured to compatibility, channel 1 configured to compatibility > wd0 at pciide0 channel 0 drive 0: <> > wd0: 1-sector PIO, LBA, 7775MB, 15924384 sectors > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4 > pciide0: channel 1 disabled (no drives) > ohci0 at pci0 dev 15 function 0 "Acer Labs M5237 USB" rev 0x03: irq 5, > version 1.0, legacy support > ohci1 at pci0 dev 15 function 1 "Acer Labs M5237 USB" rev 0x03: irq 5, > version 1.0, legacy support > ehci0 at pci0 dev 15 function 3 "Acer Labs M5239 USB2" rev 0x01: irq 11 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "Acer Labs EHCI root hub" rev 2.00/1.00 addr 1 > isa0 at pcib0 > isadma0 at isa0 > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pms0 at pckbc0 (aux slot) > pckbc0: using irq 12 for aux slot > wsmouse0 at pms0 mux 0 > pcppi0 at isa0 port 0x61 > midi0 at pcppi0: <PC speaker> > spkr0 at pcppi0 > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 > pcic0 at isa0 port 0x3e0/2 iomem 0xd0000/16384 > pcic0 controller 0: <Intel 82365SL rev 1> has socket A only > pcmcia0 at pcic0 controller 0 socket 0 > pcic0: irq 9, polling enabled > usb1 at ohci0: USB revision 1.0 > uhub1 at usb1 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1 > usb2 at ohci1: USB revision 1.0 > uhub2 at usb2 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1 > biomask ede5 netmask edfd ttymask ffff > uhidev0 at uhub1 port 1 configuration 1 interface 0 "PIXART USB OPTICAL > MOUSE" rev 1.10/1.00 addr 2 > uhidev0: iclass 3/1 > ums0 at uhidev0: 3 buttons, Z dir > wsmouse1 at ums0 mux 0 > vscsi0 at root > scsibus0 at vscsi0: 256 targets > softraid0 at root > root on wd0a swap on wd0b dump on wd0b > uhidev1 at uhub2 port 1 configuration 1 interface 0 "CHESEN PS2 to USB > Converter" rev 1.10/0.10 addr 2 > uhidev1: iclass 3/1 > ukbd0 at uhidev1: 8 modifier keys, 6 key codes > wskbd1 at ukbd0 mux 1 > wskbd1: connecting to wsdisplay0 > uhidev2 at uhub2 port 1 configuration 1 interface 1 "CHESEN PS2 to USB > Converter" rev 1.10/0.10 addr 2 > uhidev2: iclass 3/1, 3 report ids > ums1 at uhidev2 reportid 1: 5 buttons, Z dir > wsmouse2 at ums1 mux 0 > uhid0 at uhidev2 reportid 2: input=1, output=0, feature=0 > uhid1 at uhidev2 reportid 3: input=3, output=0, feature=0
