Hi all,
Is there a way to force the speed of fans on last -CURRENT ? I have an
x201i, and fan sounds louder than on the windows that was installed on
it. It's event worth if I try to use apm with -A option. Sensors are
enabled but doesn't seem to change anything. Also is acpi better
supported on i386 vs amd64 ?
Any idea ?
- benont
$ sysctl hw.sensors
hw.sensors.cpu0.temp0=35.00 degC
hw.sensors.cpu1.temp0=35.00 degC
hw.sensors.cpu2.temp0=35.00 degC
hw.sensors.cpu3.temp0=35.00 degC
hw.sensors.acpitz0.temp0=47.00 degC (zone temperature)
hw.sensors.acpibat0.volt0=10.80 VDC (voltage)
hw.sensors.acpibat0.volt1=12.46 VDC (current voltage)
hw.sensors.acpibat0.amphour0=9.39 Ah (last full capacity)
hw.sensors.acpibat0.amphour1=0.47 Ah (warning capacity)
hw.sensors.acpibat0.amphour2=0.02 Ah (low capacity)
hw.sensors.acpibat0.amphour3=9.39 Ah (remaining capacity), OK
hw.sensors.acpibat0.raw0=0 (battery full), OK
hw.sensors.acpibat0.raw1=0 (rate)
hw.sensors.acpiac0.indicator0=On (power supply)
hw.sensors.acpithinkpad0.temp0=47.00 degC
hw.sensors.acpithinkpad0.temp1=47.00 degC
hw.sensors.acpithinkpad0.temp2=47.00 degC
hw.sensors.acpithinkpad0.temp3=47.00 degC
hw.sensors.acpithinkpad0.temp4=47.00 degC
hw.sensors.acpithinkpad0.temp5=47.00 degC
hw.sensors.acpithinkpad0.temp6=47.00 degC
hw.sensors.acpithinkpad0.temp7=47.00 degC
hw.sensors.acpithinkpad0.fan0=3265 RPM
hw.sensors.acpidock0.indicator0=Off (not docked)
hw.sensors.iwn0.temp0=44.00 degC
hw.sensors.itherm0.temp1=39.01 degC (Core 1)
hw.sensors.itherm0.temp4=48.00 degC (CPU/GPU Max temp)
hw.sensors.itherm0.temp9=48.00 degC (GPU/Memory controller abs.)
hw.sensors.itherm0.temp10=59.00 degC (PCH abs.)
hw.sensors.itherm0.power0=6.00 W (CPU power consumption)
dmesg :
OpenBSD 4.8-current (GENERIC.MP) #591: Tue Oct 19 11:45:02 MDT 2010
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 1998045184 (1905MB)
avail mem = 1930993664 (1841MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xe0010 (78 entries)
bios0: vendor LENOVO version "6QET52WW (1.22 )" date 08/23/2010
bios0: LENOVO 3323BSG
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SSDT ECDT APIC MCFG HPET ASF! SLIC BOOT SSDT
TCPA SSDT SSDT SSDT
acpi0: wakeup devices LID_(S3) SLPB(S3) IGBE(S4) EXP1(S4) EXP2(S4)
EXP3(S4) EXP4(S4) EXP5(S4) EHC1(S3) EHC2(S3) HDEF(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiec0 at acpi0
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i3 CPU M 370 @ 2.40GHz, 2394.41 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3
,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,LONG
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: apic clock running at 133MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM) i3 CPU M 370 @ 2.40GHz, 2394.00 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3
,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,LONG
cpu1: 256KB 64b/line 8-way L2 cache
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Core(TM) i3 CPU M 370 @ 2.40GHz, 2394.00 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3
,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,LONG
cpu2: 256KB 64b/line 8-way L2 cache
cpu3 at mainbus0: apid 5 (application processor)
cpu3: Intel(R) Core(TM) i3 CPU M 370 @ 2.40GHz, 2394.00 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3
,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,LONG
cpu3: 256KB 64b/line 8-way L2 cache
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 2, remapped to apid 1
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG_)
acpiprt2 at acpi0: bus 13 (EXP1)
acpiprt3 at acpi0: bus -1 (EXP2)
acpiprt4 at acpi0: bus -1 (EXP3)
acpiprt5 at acpi0: bus 5 (EXP4)
acpiprt6 at acpi0: bus 2 (EXP5)
acpicpu0 at acpi0: C3, C1, PSS
acpicpu1 at acpi0: C3, C1, PSS
acpicpu2 at acpi0: C3, C1, PSS
acpicpu3 at acpi0: C3, C1, PSS
acpipwrres0 at acpi0: PUBS
acpitz0 at acpi0: critical temperature 100 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpibat0 at acpi0: BAT0 model "42T4696" serial 8240 type LION oem
"Panasonic"
acpibat1 at acpi0: BAT1 not present
acpiac0 at acpi0: AC unit online
acpithinkpad0 at acpi0
acpidock0 at acpi0: GDCK not docked (0)
cpu0: Enhanced SpeedStep 2394 MHz: speeds: 2399, 2266, 2133, 1999,
1866, 1733, 1599, 1466, 1333, 1199, 1066, 933 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 vendor "Intel", unknown product 0x0044 rev
0x02
vga1 at pci0 dev 2 function 0 "Intel Mobile HD graphics" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0 at vga1: apic 1 int 16 (irq 11)
drm0 at inteldrm0
"Intel 3400 MEI" rev 0x06 at pci0 dev 22 function 0 not configured
em0 at pci0 dev 25 function 0 "Intel 82577LM" rev 0x06: apic 1 int 20
(irq 11), address f0:de:f1:1b:0a:8a
ehci0 at pci0 dev 26 function 0 "Intel 3400 USB" rev 0x06: apic 1 int
23 (irq 11)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 3400 HD Audio" rev 0x06: apic
1 int 17 (irq 11)
azalia0: codecs: Conexant/0x5069, Intel/0x2804, using Conexant/0x5069
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 3400 PCIE" rev 0x06: apic 1 int
20 (irq 11)
pci1 at ppb0 bus 13
ppb1 at pci0 dev 28 function 3 "Intel 3400 PCIE" rev 0x06: apic 1 int
23 (irq 11)
pci2 at ppb1 bus 5
ppb2 at pci0 dev 28 function 4 "Intel 3400 PCIE" rev 0x06: apic 1 int
20 (irq 11)
pci3 at ppb2 bus 2
iwn0 at pci3 dev 0 function 0 "Intel Centrino Advanced-N 6200" rev
0x35: apic 1 int 16 (irq 11), MIMO 2T2R, MoW, address
00:27:10:95:c3:34
ehci1 at pci0 dev 29 function 0 "Intel 3400 USB" rev 0x06: apic 1 int
19 (irq 11)
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xa6
pci4 at ppb3 bus 14
pcib0 at pci0 dev 31 function 0 "Intel QM57 LPC" rev 0x06
ahci0 at pci0 dev 31 function 2 "Intel 3400 AHCI" rev 0x06: apic 1 int
16 (irq 11), AHCI 1.3
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, WDC WD3200BEVT-0, 02.0> SCSI3 0/direct
fixed
sd0: 305245MB, 512 bytes/sec, 625142448 sec total
ichiic0 at pci0 dev 31 function 3 "Intel 3400 SMBus" rev 0x06: apic 1
int 23 (irq 11)
iic0 at ichiic0
"eeprom" at iic0 addr 0x50 not configured
itherm0 at pci0 dev 31 function 6 "Intel 3400 Thermal" rev 0x06
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
aps0 at isa0 port 0x1600/31
aps0: failed to initialize
mtrr: Pentium Pro MTRR support
uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
uvideo0 at uhub2 port 6 configuration 1 interface 0 "Chicony
Electronics Co., Ltd. Integrated Camera" rev 2.00/23.45 addr 3
video0 at uvideo0
uhub3 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
