Should I conclude nobody else gets this?

(The story was about install48.iso from 05-Oct-2010 hanging on boot with no
error message when encountering a misbehaving device that was simply disabled
in august snapshots and previous releases).

Dmitrij D. Czarkoff <czark...@gmail.com> wrote:

> Matthew Dempsky <matt...@dempsky.org> wrote:
> >
> > Some more details would be helpful.  E.g., at least a dmesg from your
> > working 4.7 install, and if you could transcribe at least the last few
> > lines of dmesg output from booting install48.iso (e.g., did it panic
> > or just hang?) that would go a long way.
>
> My 4.7 dmesg:
>
> OpenBSD 4.7-stable (GENERIC.MP) #0: Thu Jul 22 09:31:34 MSD 2010
>     r...@ao531h.bedova:/usr/src/sys/arch/i386/compile/GENERIC.MP
> RTC BIOS diagnostic error 80<clock_battery>
> cpu0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz ("GenuineIntel" 686-class) 1.60 GHz
> cpu0: 
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,xTPR
> real mem  = 1060163584 (1011MB)
> avail mem = 1018466304 (971MB)
> RTC BIOS diagnostic error 80<clock_battery>
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 10/06/08, SMBIOS rev. 2.4 @ 0xe90b0 (31 
> entries)
> bios0: vendor Acer version "v0.3110" date 10/06/2008
> bios0: Acer AO531h
> acpi0 at bios0: rev 2
> acpi0: tables DSDT FACP SSDT HPET APIC MCFG ASF! SLIC BOOT
> acpi0: wakeup devices P32_(S4) UHC1(S3) UHC2(S3) UHC3(S3) UHC4(S3) ECHI(S3) 
> EXP1(S4) EXP2(S4) EXP3(S4) EXP4(S4) AZAL(S0) MODM(S0)
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpihpet0 at acpi0: 14318179 Hz
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: apic clock running at 132MHz
> cpu1 at mainbus0: apid 1 (application processor)
> cpu1: Intel(R) Atom(TM) CPU N270 @ 1.60GHz ("GenuineIntel" 686-class) 1.60 GHz
> cpu1: 
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,xTPR
> ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins
> ioapic0: misconfigured as apic 0, remapped to apid 4
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus 4 (P32_)
> acpiprt2 at acpi0: bus 1 (EXP1)
> acpiprt3 at acpi0: bus -1 (EXP2)
> acpiprt4 at acpi0: bus 2 (EXP3)
> acpiprt5 at acpi0: bus 3 (EXP4)
> acpiec0 at acpi0
> acpicpu0 at acpi0: C3, C2, C1, PSS
> acpicpu1 at acpi0: C3, C2, C1, PSS
> acpitz0 at acpi0: critical temperature 95 degC
> acpibtn0 at acpi0: PWRB
> acpibtn1 at acpi0: LID0
> acpibtn2 at acpi0: SLPB
> acpibat0 at acpi0: BAT1 not present
> acpiac0 at acpi0: AC unit online
> acpivideo0 at acpi0: OVGA
> acpivout0 at acpivideo0: CRT1
> acpivout1 at acpivideo0: DTV1
> acpivout2 at acpivideo0: DFP1
> acpivout3 at acpivideo0: LCD_
> acpivout4 at acpivideo0: DTV2
> acpivout5 at acpivideo0: DFP2
> bios0: ROM list: 0xc0000/0xec00!
> cpu0: Enhanced SpeedStep 1596 MHz: speeds: 1600, 1333, 1066, 800 MHz
> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82945GME Host" rev 0x03
> vga1 at pci0 dev 2 function 0 "Intel 82945GME Video" rev 0x03
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> intagp0 at vga1
> agp0 at intagp0: aperture at 0x40000000, size 0x10000000
> inteldrm0 at vga1: apic 4 int 16 (irq 11)
> drm0 at inteldrm0
> "Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
> azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: apic 4 
> int 16 (irq 11)
> azalia0: codecs: Realtek ALC272
> audio0 at azalia0
> ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 4 int 16 
> (irq 255)
> pci1 at ppb0 bus 1
> ale0 at pci1 dev 0 function 0 "Attansic Technology L1E" rev 0xb0: AR8113, 
> apic 4 int 16 (irq 11), address 00:26:9e:00:53:d1
> atphy0 at ale0 phy 0: F1 10/100/1000 PHY, rev. 9
> ppb1 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02: apic 4 int 18 
> (irq 255)
> pci2 at ppb1 bus 2
> iwn0 at pci2 dev 0 function 0 "Intel WiFi Link 5150" rev 0x00: apic 4 int 18 
> (irq 11), MIMO 1T2R, ABG, address 00:16:eb:0e:7d:62
> ppb2 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02: apic 4 int 19 
> (irq 255)
> pci3 at ppb2 bus 3
> uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 4 int 16 
> (irq 11)
> uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 4 int 17 
> (irq 11)
> uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 4 int 18 
> (irq 11)
> uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 4 int 19 
> (irq 11)
> ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 4 int 16 
> (irq 11)
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
> pci4 at ppb3 bus 4
> ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled
> pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x02: DMA, channel 
> 0 configured to compatibility, channel 1 configured to compatibility
> pciide0: channel 0 disabled (no drives)
> pciide0: channel 1 ignored (disabled)
> ahci0 at pci0 dev 31 function 2 "Intel 82801GBM AHCI" rev 0x02: apic 4 int 17 
> (irq 11), AHCI 1.1
> scsibus0 at ahci0: 32 targets
> sd0 at scsibus0 targ 0 lun 0: <ATA, ST9160310AS, 0303> SCSI3 0/direct fixed
> sd0: 152627MB, 512 bytes/sec, 312581808 sec total
> ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 4 int 
> 17 (irq 11)
> iic0 at ichiic0
> spdmem0 at iic0 addr 0x51: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
> usb1 at uhci0: USB revision 1.0
> uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb2 at uhci1: USB revision 1.0
> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb3 at uhci2: USB revision 1.0
> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb4 at uhci3: USB revision 1.0
> uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> isa0 at ichpcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pms0 mux 0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> mtrr: Pentium Pro MTRR support
> uvideo0 at uhub0 port 1 configuration 1 interface 0 "Sonix Technology Co., 
> Ltd. WebCam" rev 2.00/1.00 addr 2
> video0 at uvideo0
> umass0 at uhub0 port 3 configuration 1 interface 0 "Cypress Semiconductor 
> USB2.0 Storage Device" rev 2.00/0.01 addr 3
> umass0: using SCSI over Bulk-Only
> scsibus1 at umass0: 2 targets, initiator 0
> cd0 at scsibus1 targ 1 lun 0: <HL-DT-ST, DVDRAM GSA-T10N, PR03> SCSI0 5/cdrom 
> removable
> uhub0: port 7, set config at addr 4 failed
> uhub0: device problem, disabling port 7
> vscsi0 at root
> scsibus2 at vscsi0: 256 targets
> softraid0 at root
> root on sd0a swap on sd0b dump on sd0b
>
> install48.iso hangs after the line:
>
> cd0 at scsibus1 targ 1 lun 0: <HL-DT-ST, DVDRAM GSA-T10N, PR03> SCSI0 5/cdrom 
> removable
>
> Which is a USB CD drive containing the installation medium. The same drive was
> used for 4.7 install.
>
> Actually, the following lines in my 4.7 dmesg (the first lines not present in
> install4.8.iso dmesg) refer to some device I can't identify for sure, but I
> believe it's a built-in bluetooth device:
>
> uhub0: port 7, set config at addr 4 failed
> uhub0: device problem, disabling port 7
>
> --
> Dmitrij D. Czarkoff

Reply via email to