This problem only seem to happen where there is alot of active
connections and more than 2Mbit/s going thrue this little soekris...
Im not sure how to fix this, so any help appreciated!
OpenBSD 4.8-current (GENERIC) #355: Wed Sep 8 17:33:10 MDT 2010
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Geode(TM) Integrated Processor by National Semi ("Geode by NSC"
586-class) 267 MHz
cpu0: FPU,TSC,MSR,CX8,CMOV,MMX
real mem = 133787648 (127MB)
avail mem = 121700352 (116MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 20/80/03, BIOS32 rev. 0 @ 0xf7840
pcibios0 at bios0: rev 2.0 @ 0xf0000/0x10000
pcibios0: pcibios_get_intr_routing - function not supported
pcibios0: PCI IRQ Routing information unavailable.
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc8000/0x9000
cpu0 at mainbus0: (uniprocessor)
cpu0: TSC disabled
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Cyrix GXm PCI" rev 0x00
sis0 at pci0 dev 6 function 0 "NS DP83815 10/100" rev 0x00, DP83816A:
irq 10, address 00:00:24:c6:12:e8
nsphyter0 at sis0 phy 0: DP83815 10/100 PHY, rev. 1
sis1 at pci0 dev 7 function 0 "NS DP83815 10/100" rev 0x00, DP83816A:
irq 10, address 00:00:24:c6:12:e9
nsphyter1 at sis1 phy 0: DP83815 10/100 PHY, rev. 1
sis2 at pci0 dev 8 function 0 "NS DP83815 10/100" rev 0x00, DP83816A:
irq 10, address 00:00:24:c6:12:ea
nsphyter2 at sis2 phy 0: DP83815 10/100 PHY, rev. 1
ral0 at pci0 dev 14 function 0 "Ralink RT2561" rev 0x00: irq 11,
address 00:08:a1:9c:32:f9
ral0: MAC/BBP RT2661B, RF RT2527
gscpcib0 at pci0 dev 18 function 0 "NS SC1100 ISA" rev 0x00
gpio0 at gscpcib0: 64 pins
"NS SC1100 SMI" rev 0x00 at pci0 dev 18 function 1 not configured
pciide0 at pci0 dev 18 function 2 "NS SCx200 IDE" rev 0x01: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 1: <SanDisk SDCFH2-008G>
wd0: 4-sector PIO, LBA, 7815MB, 16007040 sectors
wd0(pciide0:0:1): using PIO mode 4, DMA mode 2
geodesc0 at pci0 dev 18 function 5 "NS SC1100 X-Bus" rev 0x00: iid 6
revision 3 wdstatus 0
ohci0 at pci0 dev 19 function 0 "Compaq USB OpenHost" rev 0x08: irq 5,
version 1.0, legacy support
isa0 at gscpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
nsclpcsio0 at isa0 port 0x2e/2: NSC PC87366 rev 9: GPIO VLM TMS
gpio1 at nsclpcsio0: 29 pins
gscsio0 at isa0 port 0x15c/2: SC1100 SIO rev 1:
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
usb0 at ohci0: USB revision 1.0
uhub0 at usb0 "Compaq OHCI root hub" rev 1.00/1.00 addr 1
biomask f3e5 netmask ffe5 ttymask ffff
uhub1 at uhub0 port 1 "Genesys Logic USB2.0 Hub" rev 2.00/9.01 addr 2
uftdi0 at uhub1 port 3 "Telldus TellStick" rev 2.00/6.00 addr 3
ucom0 at uftdi0 portno 1
ugen0 at uhub1 port 4 "Hewlett-Packard HP LaserJet 1020" rev 2.00/1.00 addr 4
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
WARNING: / was not properly unmounted
pf: state key linking mismatch! dir=OUT, if=sis0, stored af=2, a0:
83.252.222.171:55062, a1: 10.10.10.111:38309, proto=17, found af=2,
a0: 187.170.255.239:65519, a1: 187.170.255.239:48042, proto=17
pf: state key linking mismatch! dir=OUT, if=sis0, stored af=2, a0:
94.112.19.65:50001, a1: 10.10.10.207:39068, proto=17, found af=2, a0:
187.170.255.239:65519, a1: 187.170.255.239:48042, proto=17
uvm_fault(0xd0a08280, 0x1900e000, 0, 3) -> e
kernel: page fault trap, code=0
Stopped at pool_do_get+0x145: movl %eax,0x8(%edx)
PS:
PID PPID PGRP UID S FLAGS WAIT COMMAND
2903 1 2903 0 3 0x4080 ttyin getty
16063 1 16063 0 3 0x80 select cron
27543 3454 3454 0 3 0x4080 kqread tail
3454 1 3454 0 3 0x80 piperd perl
26634 1 455 0 3 0x80 nanosleep perl
22063 15708 15708 0 3 0x180 select smbd
15708 1 15708 0 3 0x180 select smbd
22468 1 22468 0 3 0x80 select miniupnpd
17792 30426 30426 67 3 0x180 netcon httpd
32576 30426 30426 67 3 0x180 netcon httpd
26016 30426 30426 67 3 0x180 netcon httpd
5024 1 5024 0 3 0x180 select inetd
30426 1 30426 67 3 0x180 select httpd
15973 16859 16859 95 3 0x180 kqread smtpd
27354 16859 16859 95 3 0x180 kqread smtpd
10819 16859 16859 95 3 0x180 kqread smtpd
2265 16859 16859 95 3 0x180 kqread smtpd
14262 16859 16859 95 3 0x180 kqread smtpd
25632 16859 16859 95 3 0x180 kqread smtpd
29244 16859 16859 95 3 0x180 kqread smtpd
16859 1 16859 0 3 0x80 kqread smtpd
13804 1 13804 0 3 0x40180 select lpd
15959 3995 3995 77 3 0x180 poll dhcpd
3995 1 3995 77 3 0x180 poll dhcpd
31600 1 31600 0 3 0x80 select sshd
13155 9890 14998 83 3 0x180 poll ntpd
9890 14998 14998 83 3 0x180 poll ntpd
14998 1 14998 0 3 0x80 poll ntpd
9211 29843 29843 70 3 0x180 select named
29843 1 29843 0 3 0x180 netio named
5565 11466 11466 74 3 0x180 bpf pflogd
11466 1 11466 0 3 0x80 netio pflogd
24012 633 633 73 2 0x180 syslogd
633 1 633 0 3 0x88 netio syslogd
7276 1 7276 77 3 0x180 poll dhclient
32013 1 455 0 3 0x80 poll dhclient
13 0 0 0 3 0x100200 aiodoned aiodoned
12 0 0 0 3 0x100200 syncer update
11 0 0 0 3 0x100200 cleaner cleaner
10 0 0 0 3 0x100200 reaper reaper
9 0 0 0 3 0x100200 pgdaemon pagedaemon
8 0 0 0 3 0x100200 bored crypto
7 0 0 0 3 0x100200 pftm pfpurge
6 0 0 0 3 0x100200 usbtsk usbtask
5 0 0 0 3 0x100200 usbevt usb0
4 0 0 0 3 0x100200 bored syswq
* 3 0 0 0 7 0x40100200 idle0
2 0 0 0 3 0x100200 kmalloc kmthread
1 0 1 0 3 0x4080 wait init
0 -1 0 0 3 0x80200 scheduler swapper
TRACE:
pool_do_get(d0a0fc40,0,d4a85800,d4a86700,0) at pool_do_get+0x145
pool_get(d0a0fc40,0,d44a8b60,d042b24e,d47d9a00) at pool_get+0x54
m_clget(0,1,d0ddb434,800,5) at m_clget+0x6c
sis_newbuf(d0ddb400,d43c91c8,d0ddb434,249,249) at sis_newbuf+0x41
sis_fill_rx_ring(d0ddb400,e100,10,0,cf0a0a0a) at sis_fill_rx_ring+0x69
sis_intr(d0ddb400) at sis_intr+0xb8
Xrecurse_legacy10() at Xrecurse_legacy10+0xb7
--- interrupt ---
pf_pull_hdr(d47c1d00,14,d44a8cd8,8,d44a8d02) at pf_pull_hdr+0x7f
pf_test(2,d0ddb034,d44a8e20,0,d0a0fb60) at pf_test+0xea4
ip_output(d47c1d00,0,d0a15460,1,0) at ip_output+0x5f0
ip_forward(d47c1d00,1,d44a8f10,0,d0ddb034) at ip_forward+0x181
ipv4_input(d47c1d00,0,d44a8f18,d0202089,d03e0058) at ipv4_input+0x655
ipintr(d03e0058,d0ac0010,d0890010,d44a0010,d0ac43b4) at ipintr+0x49
