Hello,
Having some issues with azalia(4) in a thinkpad T61, and perhaps aucat
may have something to do with it too.
Very simple setup, listening to mpd playing audio streams from another
mpd running on another machine. Sound skips at times, coinciding with
the following messages in dmesg:
azalia0: stream 1: sts=28<FIFOE,FIFORDY>
azalia0: stream 1: sts=28<FIFOE,FIFORDY>
azalia0: stream 1: sts=28<FIFOE,FIFORDY>
azalia0: stream 1: sts=28<FIFOE,FIFORDY>
azalia0: stream 1: sts=28<FIFOE,FIFORDY>
azalia0: stream 1: sts=2c<BCIS,FIFOE,FIFORDY>
azalia0: stream 1: sts=28<FIFOE,FIFORDY>
azalia0: stream 1: sts=28<FIFOE,FIFORDY>
azalia0: stream 1: sts=28<FIFOE,FIFORDY>
azalia0: stream 1: sts=28<FIFOE,FIFORDY>
azalia0: stream 1: sts=28<FIFOE,FIFORDY>
azalia0: stream 1: sts=28<FIFOE,FIFORDY>
azalia0: stream 1: sts=2c<BCIS,FIFOE,FIFORDY>
azalia0: stream 1: sts=28<FIFOE,FIFORDY>
azalia0: stream 1: sts=28<FIFOE,FIFORDY>
azalia0: stream 1: sts=28<FIFOE,FIFORDY>
....
$ dmesg | grep azalia | wc -l
582
Sometimes aucat just exits by itself, sometimes doesn't.
$ sudo aucat -dddd
sio(default|): created
default: recording s16le,0:1,44100
default: playing s16le,0:1,44100
mix(play): newin, will use 11648
default: block size is 2912 frames, using 4 blocks
defa...@default: rec=0:1 play=0:1 vol=32768
listen(/tmp/aucat/softaudio0|): created
sock(sock|): created
sock/hel|rmsg|widl: HELLO message
sock/hel|rmsg|widl: hello from <mpd>, proto = 1, ver 3
default: option found
device requested
ctl(ctl): new control name is mpd0
ctl(ctl): overwritten slot 0
sock/hel|rmsg|widl: no read buffer to set volume yet
mpd0(127)/off: changing volume to 127
mpd0/ini|rmsg|widl: SETPAR message
mpd0/ini|rmsg|widl: using 16bits, 2 bytes per sample
mpd0/ini|rmsg|widl: using playback channels 0..1
mpd0/ini|rmsg|widl: using 44100Hz sample rate, 2912 fr block size
mpd0/ini|rmsg|widl: using 11648 buffer size
mpd0: buffer size = 11648, play = s16le,0:1,44100
mpd0/ini|rmsg|widl: GETPAR message
mpd0/ini|rret|widl: RRET done
mpd0/ini|rmsg|widl: GETPAR message
mpd0/ini|rret|widl: RRET done
mpd0/ini|rmsg|widl: GETPAR message
mpd0/ini|rret|widl: RRET done
mpd0/ini|rmsg|widl: START message
mpd0/sta|rmsg|widl: allocating 11648/23296 fr buffers, rmax = 93184
mpd0/run|rmsg|widl: attaching at 0
rsock(sock)->mix(play): setmaster: 32768/32768
syncing device, mix(play): todo = 0: lat = 0, sub(rec): lat = 0
rsock(sock)->mix(play): setting volume to 32768
starting device
sio(default|): started
sio(default|): busy loop, disconnecting
sio(default|): disconnected
sio(default|eh): eof
rsio(default): eof
rsio(default): terminating...
rsio(default): done
rsio(default)->sub(rec): eof requested
sub(rec): terminating...
sub(rec): free delayed
wsio(default): terminating...
wsio(default): done
mix(play)->wsio(default): hup requested
mix(play): hup
mix(play): terminating...
rsock(sock)->mix(play): hup requested
rsock(sock): hup
rsock(sock): terminating...
rsock(sock): done
mpd0/ini|rmsg|widl: freeing buffers
wsock(sock): terminating...
wsock(sock): done
wsock(sock): freed
sock(sock|w): terminating...
sock(sock|w): destroyed
device released
rsock(sock): freed
mix(play): free delayed
sio(default|Reh): terminating...
wsio(default): free delayed
rsio(default): free delayed
sio(default|hZ): terminating...
sio(default|hZ): destroyed
sio(default|hZ): stopped
device disappeared
closing device
ctl(ctl): terminating...
ctl(ctl): done
ctl(ctl): free delayed
zomb(play): freed
zomb(default): freed
zomb(rec): freed
zomb(default): freed
zomb(ctl): freed
listen(/tmp/aucat/softaudio0|): closing
listen(/tmp/aucat/softaudio0|Z): terminating...
listen(/tmp/aucat/softaudio0|Z): destroyed
nothing to do...
These events tend to happen when I switch virtual screens in scrotwm..
Haven't tried on other WMs.
Usually I run it like this:
$ grep aucat /etc/rc.conf.local
aucat_flags="-l" # for normal use: ""
OpenBSD 4.8-beta (GENERIC.MP) #297: Thu Aug 5 21:35:12 MDT 2010
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 2103115776 (2005MB)
avail mem = 2033311744 (1939MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xe0010 (73 entries)
bios0: vendor LENOVO version "7LETC7WW (2.27 )" date 04/08/2010
bios0: LENOVO 7658CTO
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SSDT ECDT TCPA APIC MCFG HPET SLIC BOOT ASF! SSDT SSDT
SSDT SSDT
acpi0: wakeup devices LID_(S3) SLPB(S3) LURT(S3) DURT(S3) IGBE(S4) EXP0(S4)
EXP1(S4) EXP2(S4) EXP3(S4) EXP4(S4) PCI1(S4) USB0(S3) USB1(S3) USB2(S3)
USB3(S3) USB4(S3) EHC0(S3) EHC1(S3) HDEF(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiec0 at acpi0
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.40GHz, 2394.40 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,NXE,LONG
cpu0: 3MB 64b/line 8-way L2 cache
cpu0: apic clock running at 199MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.40GHz, 2394.00 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,NXE,LONG
cpu1: 3MB 64b/line 8-way L2 cache
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 2, remapped to apid 1
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (AGP_)
acpiprt2 at acpi0: bus 2 (EXP0)
acpiprt3 at acpi0: bus 3 (EXP1)
acpiprt4 at acpi0: bus 4 (EXP2)
acpiprt5 at acpi0: bus 5 (EXP3)
acpiprt6 at acpi0: bus 13 (EXP4)
acpiprt7 at acpi0: bus 21 (PCI1)
acpicpu0 at acpi0: C3, C2, C1, PSS
acpicpu1 at acpi0: C3, C2, C1, PSS
acpipwrres0 at acpi0: PUBS
acpitz0 at acpi0: critical temperature 127 degC
acpitz1 at acpi0: critical temperature 100 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpibat0 at acpi0: BAT0 model "42T4530" serial 483 type LION oem "SANYO"
acpibat1 at acpi0: BAT1 not present
acpiac0 at acpi0: AC unit online
acpithinkpad0 at acpi0
acpidock0 at acpi0: GDCK not docked (0)
cpu0: Enhanced SpeedStep 2394 MHz: speeds: 2401, 2400, 2000, 1600, 1200, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel GM965 Host" rev 0x0c
vga1 at pci0 dev 2 function 0 "Intel GM965 Video" rev 0x0c
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xe0000000, size 0x10000000
inteldrm0 at vga1: apic 1 int 16 (irq 10)
drm0 at inteldrm0
"Intel GM965 Video" rev 0x0c at pci0 dev 2 function 1 not configured
em0 at pci0 dev 25 function 0 "Intel ICH8 IGP M AMT" rev 0x03: apic 1 int 20
(irq 11), address 00:1c:25:76:fa:ea
uhci0 at pci0 dev 26 function 0 "Intel 82801H USB" rev 0x03: apic 1 int 20 (irq
11)
uhci1 at pci0 dev 26 function 1 "Intel 82801H USB" rev 0x03: apic 1 int 21 (irq
11)
ehci0 at pci0 dev 26 function 7 "Intel 82801H USB" rev 0x03: apic 1 int 22 (irq
11)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801H HD Audio" rev 0x03: apic 1 int
17 (irq 11)
azalia0: codecs: Analog Devices AD1984, Conexant/0x2bfa, using Analog Devices
AD1984
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801H PCIE" rev 0x03: apic 1 int 20 (irq
11)
pci1 at ppb0 bus 2
ppb1 at pci0 dev 28 function 1 "Intel 82801H PCIE" rev 0x03: apic 1 int 21 (irq
11)
pci2 at ppb1 bus 3
iwn0 at pci2 dev 0 function 0 "Intel Wireless WiFi Link 4965" rev 0x61: apic 1
int 17 (irq 11), MIMO 2T3R, MoW1, address 00:1f:3b:03:b1:59
ppb2 at pci0 dev 28 function 2 "Intel 82801H PCIE" rev 0x03: apic 1 int 22 (irq
11)
pci3 at ppb2 bus 4
ppb3 at pci0 dev 28 function 3 "Intel 82801H PCIE" rev 0x03: apic 1 int 23 (irq
11)
pci4 at ppb3 bus 5
ppb4 at pci0 dev 28 function 4 "Intel 82801H PCIE" rev 0x03: apic 1 int 20 (irq
11)
pci5 at ppb4 bus 13
uhci2 at pci0 dev 29 function 0 "Intel 82801H USB" rev 0x03: apic 1 int 16 (irq
10)
uhci3 at pci0 dev 29 function 1 "Intel 82801H USB" rev 0x03: apic 1 int 17 (irq
11)
uhci4 at pci0 dev 29 function 2 "Intel 82801H USB" rev 0x03: apic 1 int 18 (irq
11)
ehci1 at pci0 dev 29 function 7 "Intel 82801H USB" rev 0x03: apic 1 int 19 (irq
11)
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb5 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xf3
pci6 at ppb5 bus 21
cbb0 at pci6 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0xba: apic 1 int 16
(irq 10)
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 22 device 0 cacheline 0x8, lattimer 0xb0
pcmcia0 at cardslot0
pcib0 at pci0 dev 31 function 0 "Intel 82801HEM LPC" rev 0x03
pciide0 at pci0 dev 31 function 1 "Intel 82801HBM IDE" rev 0x03: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, DVD/CDRW UJDA775, CB03> ATAPI 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
ahci0 at pci0 dev 31 function 2 "Intel 82801HBM AHCI" rev 0x03: apic 1 int 16
(irq 10), AHCI 1.1
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, FUJITSU MHW2160B, 0084> SCSI3 0/direct fixed
sd0: 152627MB, 512 bytes/sec, 312581808 sec total
ichiic0 at pci0 dev 31 function 3 "Intel 82801H SMBus" rev 0x03: apic 1 int 23
(irq 11)
iic0 at ichiic0
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
aps0 at isa0 port 0x1600/31
mtrr: Pentium Pro MTRR support
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
