Marco, thank you for your super fast answer!
As I understood you told that I need to delete raid logical disk, and use two separate disks. I did it and I'm installing OpenBSD on first disk right now. I have question for you - how should I "enable write cache on them using scsi" ? -- Thanks! On Tue, Aug 31, 2010 at 7:00 PM, Marco Peereboom <sl...@peereboom.us> wrote: > Your disks have write cache disabled. B I started on a diff but hit a > roadblock and didn't get back to figuring this out. B Currently the only > way to "fix" this is to undo the raid volume and let the actual physical > disks show up. B Then enable write cache on them using scsi. B Not really > something for the faint hearted. B At some point I'll go spend some time > to figure this out but not anytime soon :-( > > On Tue, Aug 31, 2010 at 06:52:44PM +0300, Evgeniy Sudyr wrote: >> I have troubles with on OpenBSD 4.7 with HP DL 120 G5 >> >> Actually I'm trying to unpack src.tar.gz and see that it's very slow. >> >> There is my systat during unpacking and dmesg for the server >> >> B systat >> >> B B 2 users B B Load 2.77 2.48 2.17 B B B B B B B B B B B Tue Aug 31 19:46:02 2010 >> >> B B B B B B memory totals (in KB) B B B B B B PAGING B SWAPPING B B Interrupts >> B B B B B B real B virtual B B free B B B B B in B out B in B out B B B 568 total >> Active B B 13212 B B 13212 B 3281736 B ops B B B B B B B B B B B B B B 400 clock >> All B B B 410024 B B 410024 B 7342468 B pages B B B B B B B B B B B B B 79 ipi >> B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B 88 mpi0 >> Proc:r B d B s B w B B Csw B Trp B Sys B Int B Sof B Flt B B B forks B B B 1 em0 >> B B B B 2 B 6 B B B 164 B B 1 B 258 B B 89 B 100 B B 9 B B B fkppw B B B B uhci3 >> B B B B B B B B B B B B B B B B B B B B B B B B B B B B B fksvm B B B B ehci1 >> B B 0.0%Int B 0.1%Sys B 0.2%Usr B 0.0%Nic B 99.7%Idle B B B pwait >> | B B | B B | B B | B B | B B | B B | B B | B B | B B | B B | B B B relck >> B B B B B B B B B B B B B B B B B B B B B B B B B B B B B rlkok >> B B B B B B B B B B B B B B B B B B B B B B B B B B B B B noram >> Namei B B B B Sys-cache B B Proc-cache B B No-cache B B B B ndcpy >> B B Calls B B hits B B % B B hits B B % B B miss B % B B B B fltcp >> B B B 881 B B B 742 B 84 B B B 4 B B 0 B B 135 B 15 B B B B zfod >> B B B B B B B B B B B B B B B B B B B B B B B B B B B B B cow >> Disks B sd0 B B B B B B B B B B B B B B B B B B B B 30764 fmin >> seeks B B B B B B B B B B B B B B B B B B B B B B B 41018 ftarg >> xfers B B 88 B B B B B B B B B B B B B B B B B B B B B B B itarg >> speed B 761K B B B B B B B B B B B B B B B B B B B B B B 49 wired >> B sec B 1.0 B B B B B B B B B B B B B B B B B B B B B B B pdfre >> B B B B B B B B B B B B B B B B B B B B B B B B B B B B B pdscn >> B B B B B B B B B B B B B B B B B B B B B B B B B B B B B pzidle >> B B B B B B B B B B B B B B B B B B B B B B B B B B B B 15 kmapent >> >> B dmesg >> >> OpenBSD 4.7 (GENERIC.MP) #130: Wed Mar 17 20:48:50 MDT 2010 >> B B dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP >> real mem = 3889758208 (3709MB) >> avail mem = 3780005888 (3604MB) >> mainbus0 at root >> bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xdc010 (43 entries) >> bios0: vendor HP version "O22" date 10/09/2009 >> bios0: HP ProLiant DL120 G5 >> acpi0 at bios0: rev 2 >> acpi0: tables DSDT FACP SPMI EINJ HEST BERT SSDT ERST MCFG APIC BOOT >> SPCR SSDT SSDT SSDT >> acpi0: wakeup devices USB4(S3) USB5(S3) USB7(S3) ESB2(S4) EXP1(S4) >> EXP2(S4) EXP3(S4) EXP4(S4) EXP5(S4) EXP6(S4) USB1(S3) USB2(S3) >> USB3(S3) USB6(S3) ESB1(S3) PCIB(S3) PWRB(S3) >> acpitimer0 at acpi0: 3579545 Hz, 24 bits >> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat >> cpu0 at mainbus0: apid 0 (boot processor) >> cpu0: Intel(R) Xeon(R) CPU X3210 @ 2.13GHz, 2133.65 MHz >> cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16, xTPR,NXE,LONG >> cpu0: 4MB 64b/line 16-way L2 cache >> cpu0: apic clock running at 266MHz >> cpu1 at mainbus0: apid 1 (application processor) >> cpu1: Intel(R) Xeon(R) CPU X3210 @ 2.13GHz, 2133.33 MHz >> cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16, xTPR,NXE,LONG >> cpu1: 4MB 64b/line 16-way L2 cache >> cpu2 at mainbus0: apid 2 (application processor) >> cpu2: Intel(R) Xeon(R) CPU X3210 @ 2.13GHz, 2133.33 MHz >> cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16, xTPR,NXE,LONG >> cpu2: 4MB 64b/line 16-way L2 cache >> cpu3 at mainbus0: apid 3 (application processor) >> cpu3: Intel(R) Xeon(R) CPU X3210 @ 2.13GHz, 2133.33 MHz >> cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16, xTPR,NXE,LONG >> cpu3: 4MB 64b/line 16-way L2 cache >> ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins >> acpiprt0 at acpi0: bus 0 (PCI0) >> acpiprt1 at acpi0: bus 1 (PEG1) >> acpiprt2 at acpi0: bus -1 (PEG2) >> acpiprt3 at acpi0: bus 5 (EXP1) >> acpiprt4 at acpi0: bus -1 (EXP2) >> acpiprt5 at acpi0: bus -1 (EXP3) >> acpiprt6 at acpi0: bus -1 (EXP4) >> acpiprt7 at acpi0: bus 13 (EXP5) >> acpiprt8 at acpi0: bus 14 (EXP6) >> acpiprt9 at acpi0: bus 17 (PCIB) >> acpicpu0 at acpi0: C3, PSS >> acpicpu1 at acpi0: C3, PSS >> acpicpu2 at acpi0: C3, PSS >> acpicpu3 at acpi0: C3, PSS >> acpibtn0 at acpi0: PWRB >> ipmi at mainbus0 not configured >> cpu0: Enhanced SpeedStep 2133 MHz: speeds: 2133, 1600 MHz >> pci0 at mainbus0 bus 0 >> pchb0 at pci0 dev 0 function 0 "Intel 3200/3210 Host" rev 0x01 >> ppb0 at pci0 dev 1 function 0 "Intel 3200/3210 PCIE" rev 0x01: apic 4 >> int 16 (irq 5) >> pci1 at ppb0 bus 1 >> mpi0 at pci1 dev 0 function 0 "Symbios Logic SAS1068E" rev 0x08: apic >> 4 int 16 (irq 5) >> scsibus0 at mpi0: 112 targets >> sd0 at scsibus0 targ 1 lun 0: <LSILOGIC, Logical Volume, 3000> SCSI2 >> 0/direct fixed >> sd0: 237464MB, 512 bytes/sec, 486326272 sec total >> uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x02: apic 4 >> int 16 (irq 5) >> uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x02: apic 4 >> int 17 (irq 10) >> uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x02: apic 4 >> int 18 (irq 3) >> ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x02: apic 4 >> int 18 (irq 3) >> usb0 at ehci0: USB revision 2.0 >> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 >> ppb1 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x02: apic 4 >> int 16 (irq 5) >> pci2 at ppb1 bus 5 >> em0 at pci2 dev 0 function 0 "Intel PRO/1000 PT (82572EI)" rev 0x06: >> apic 4 int 16 (irq 5), address 00:18:71:ec:02:9d >> ppb2 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x02: apic 4 >> int 16 (irq 5) >> pci3 at ppb2 bus 13 >> vga1 at pci3 dev 0 function 0 "Matrox MGA G200e (ServerEngines)" rev 0x02 >> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) >> wsdisplay0: screen 1-5 added (80x25, vt100 emulation) >> ppb3 at pci0 dev 28 function 5 "Intel 82801I PCIE" rev 0x02: apic 4 >> int 17 (irq 10) >> pci4 at ppb3 bus 14 >> bge0 at pci4 dev 0 function 0 "Broadcom BCM5722" rev 0x00, BCM5755 C0 >> (0xa200): apic 4 int 17 (irq 10), address 00:23:7d:aa:06:61 >> brgphy0 at bge0 phy 1: BCM5722 10/100/1000baseT PHY, rev. 0 >> uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x02: apic 4 >> int 16 (irq 5) >> uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x02: apic 4 >> int 17 (irq 10) >> uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x02: apic 4 >> int 18 (irq 3) >> ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x02: apic 4 >> int 16 (irq 5) >> usb1 at ehci1: USB revision 2.0 >> uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 >> ppb4 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x92 >> pci5 at ppb4 bus 17 >> pcib0 at pci0 dev 31 function 0 "Intel 82801IR LPC" rev 0x02 >> pciide0 at pci0 dev 31 function 2 "Intel 82801I SATA" rev 0x02: DMA, >> channel 0 configured to native-PCI, channel 1 configured to native-PCI >> pciide0: using apic 4 int 17 (irq 10) for native-PCI interrupt >> ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x02: apic >> 4 int 17 (irq 10) >> iic0 at ichiic0 >> spdmem0 at iic0 addr 0x50: 2GB DDR2 SDRAM ECC PC2-6400CL5 >> spdmem1 at iic0 addr 0x51: 2GB DDR2 SDRAM ECC PC2-6400CL5 >> spdmem2 at iic0 addr 0x52: 2GB DDR2 SDRAM ECC PC2-6400CL5 >> spdmem3 at iic0 addr 0x53: 2GB DDR2 SDRAM ECC PC2-6400CL5 >> pciide1 at pci0 dev 31 function 5 "Intel 82801I SATA" rev 0x02: DMA, >> channel 0 wired to native-PCI, channel 1 wired to native-PCI >> pciide1: using apic 4 int 18 (irq 3) for native-PCI interrupt >> usb2 at uhci0: USB revision 1.0 >> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 >> usb3 at uhci1: USB revision 1.0 >> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 >> usb4 at uhci2: USB revision 1.0 >> uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 >> usb5 at uhci3: USB revision 1.0 >> uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 >> usb6 at uhci4: USB revision 1.0 >> uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1 >> usb7 at uhci5: USB revision 1.0 >> uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1 >> isa0 at pcib0 >> isadma0 at isa0 >> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo >> pckbc0 at isa0 port 0x60/5 >> pcppi0 at isa0 port 0x61 >> midi0 at pcppi0: <PC speaker> >> spkr0 at pcppi0 >> mtrr: Pentium Pro MTRR support >> uhidev0 at uhub5 port 2 configuration 1 interface 0 "ServerEngines SE >> USB Device" rev 1.10/0.01 addr 2 >> uhidev0: iclass 3/1 >> ukbd0 at uhidev0: 8 modifier keys, 6 key codes >> wskbd0 at ukbd0: console keyboard, using wsdisplay0 >> uhidev1 at uhub5 port 2 configuration 1 interface 1 "ServerEngines SE >> USB Device" rev 1.10/0.01 addr 2 >> uhidev1: iclass 3/1 >> ums0 at uhidev1: 8 buttons, Z dir >> wsmouse0 at ums0 mux 0 >> vscsi0 at root >> scsibus1 at vscsi0: 256 targets >> softraid0 at root >> root on sd0a swap on sd0b dump on sd0b >> >> >> # dd if=/dev/zero of=/tmp/tmp bs=1 count=10000000 >> 10000000+0 records in >> 10000000+0 records out >> 10000000 bytes transferred in 14.213 secs (703548 bytes/sec) >> >> >> I tried to disable acpi, but that not helped. Results are same. >> >> This is about driver problems or something else ? >> >> -- >> With regards, >> Eugene Sudyr >> > -- -- With regards, Eugene Sudyr
