this is likely to be a result of a corrupted filesstem... reboot in single user mode, bsd -s at the boot> prompt, and run fsck -fy all of your filesystems
Federico Giannici [giann...@neomedia.it] wrote: > A panic occurred to one of our servers. I never experienced this > panic before, but I have to say that we recently upgraded that > server from OpenBSD 4.4 to 4.7. > > The error was: > > /var: bad dir ino 3 at offset 81920: mangled entry > panic: bad dir > > I have done two photos of the panic and of the trace command: > > http://www.neomedia.it/tmp/crash-1.jpg > http://www.neomedia.it/tmp/crash-2.jpg > > The dmesg, df, mount and disklabel commands outputs are below. > > Is anything more needed? > > Bye. > > > > arwen:/home/giannici# dmesg > OpenBSD 4.7 (GENERIC.MP) #130: Wed Mar 17 20:48:50 MDT 2010 > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > real mem = 3488284672 (3326MB) > avail mem = 3388477440 (3231MB) > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.5 @ 0x9f400 (71 entries) > bios0: vendor American Megatrends Inc. version "0801" date 01/05/2009 > bios0: ASUSTeK Computer INC. M3A78 PRO > acpi0 at bios0: rev 0 > acpi0: tables DSDT FACP APIC MCFG OEMB HPET > acpi0: wakeup devices PCE2(S4) PCE3(S4) PCE4(S4) PCE5(S4) PCE6(S4) > PCE7(S4) PCE9(S4) PCEA(S4) SBAZ(S4) PS2K(S3) PS2M(S3) UAR1(S4) > P0PC(S4) UHC1(S4) UHC2(S4) UHC3(S4) USB4(S4) UHC5(S4) UHC6(S4) > UHC7(S4) PWRB(S3) > acpitimer0 at acpi0: 3579545 Hz, 32 bits > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: AMD Phenom(tm) 9650 Quad-Core Processor, 2306.35 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW > cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, > 512KB 64b/line 16-way L2 cache > cpu0: ITLB 32 4KB entries fully associative, 16 4MB entries fully > associative > cpu0: DTLB 48 4KB entries fully associative, 48 4MB entries fully > associative > cpu0: apic clock running at 200MHz > cpu1 at mainbus0: apid 1 (application processor) > cpu1: AMD Phenom(tm) 9650 Quad-Core Processor, 2306.00 MHz > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW > cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, > 512KB 64b/line 16-way L2 cache > cpu1: ITLB 32 4KB entries fully associative, 16 4MB entries fully > associative > cpu1: DTLB 48 4KB entries fully associative, 48 4MB entries fully > associative > cpu2 at mainbus0: apid 2 (application processor) > cpu2: AMD Phenom(tm) 9650 Quad-Core Processor, 2306.00 MHz > cpu2: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW > cpu2: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, > 512KB 64b/line 16-way L2 cache > cpu2: ITLB 32 4KB entries fully associative, 16 4MB entries fully > associative > cpu2: DTLB 48 4KB entries fully associative, 48 4MB entries fully > associative > cpu3 at mainbus0: apid 3 (application processor) > cpu3: AMD Phenom(tm) 9650 Quad-Core Processor, 2306.00 MHz > cpu3: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW > cpu3: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, > 512KB 64b/line 16-way L2 cache > cpu3: ITLB 32 4KB entries fully associative, 16 4MB entries fully > associative > cpu3: DTLB 48 4KB entries fully associative, 48 4MB entries fully > associative > ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 21, 24 pins > acpihpet0 at acpi0: 14318180 Hz > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 1 (P0P1) > acpiprt2 at acpi0: bus -1 (PCE2) > acpiprt3 at acpi0: bus -1 (PCE3) > acpiprt4 at acpi0: bus -1 (PCE4) > acpiprt5 at acpi0: bus -1 (PCE5) > acpiprt6 at acpi0: bus 2 (PCE6) > acpiprt7 at acpi0: bus 3 (P0PC) > acpicpu0 at acpi0 > acpicpu1 at acpi0 > acpicpu2 at acpi0 > acpicpu3 at acpi0 > aibs0 at acpi0 > aibs0: TSIF not found > aibs0: FSIF not found > aibs0: VSIF not found > aibs0: no sensors found > acpibtn0 at acpi0: PWRB > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "AMD RS780 Host" rev 0x00 > ppb0 at pci0 dev 1 function 0 "AMD RS780 PCIE" rev 0x00 > pci1 at ppb0 bus 1 > vga1 at pci1 dev 5 function 0 "ATI Radeon HD 3200" rev 0x00 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > azalia0 at pci1 dev 5 function 1 "ATI RS780 HD Audio" rev 0x00: apic > 4 int 19 (irq 11) > azalia0: no supported codecs > azalia0: initialization failure, detaching > ppb1 at pci0 dev 6 function 0 "AMD RS780 PCIE" rev 0x00: apic 4 int > 18 (irq 10) > pci2 at ppb1 bus 2 > re0 at pci2 dev 0 function 0 "Realtek 8168" rev 0x02: RTL8168C/8111C > (0x3c00), apic 4 int 18 (irq 10), address 00:23:54:51:bc:11 > rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2 > ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x00: apic 4 > int 22 (irq 11), AHCI 1.1 > scsibus0 at ahci0: 32 targets > sd0 at scsibus0 targ 0 lun 0: <ATA, WDC WD2500AAKS-0, 12.0> SCSI3 > 0/direct fixed > sd0: 238475MB, 512 bytes/sec, 488397168 sec total > sd1 at scsibus0 targ 1 lun 0: <ATA, Maxtor 6V250F0, VA11> SCSI3 > 0/direct fixed > sd1: 239372MB, 512 bytes/sec, 490234752 sec total > ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 4 int > 16 (irq 7), version 1.0, legacy support > ohci1 at pci0 dev 18 function 1 "ATI SB700 USB" rev 0x00: apic 4 int > 16 (irq 7), version 1.0, legacy support > ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 4 > int 17 (irq 10) > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1 > ohci2 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 4 int > 18 (irq 10), version 1.0, legacy support > ohci3 at pci0 dev 19 function 1 "ATI SB700 USB" rev 0x00: apic 4 int > 18 (irq 10), version 1.0, legacy support > ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 4 > int 19 (irq 11) > usb1 at ehci1: USB revision 2.0 > uhub1 at usb1 "ATI EHCI root hub" rev 2.00/1.00 addr 1 > piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x3a: SMI > iic0 at piixpm0 > spdmem0 at iic0 addr 0x50: 2GB DDR2 SDRAM non-parity PC2-6400CL5 > spdmem1 at iic0 addr 0x51: 2GB DDR2 SDRAM non-parity PC2-6400CL5 > pciide0 at pci0 dev 20 function 1 "ATI SB700 IDE" rev 0x00: DMA, > channel 0 configured to compatibility, channel 1 configured to > compatibility > atapiscsi0 at pciide0 channel 0 drive 1 > scsibus1 at atapiscsi0: 2 targets > cd0 at scsibus1 targ 0 lun 0: <HL-DT-ST, DVD-ROM GDR8164B, 0L06> > ATAPI 5/cdrom removable > cd0(pciide0:0:1): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2 > azalia1 at pci0 dev 20 function 2 "ATI SBx00 HD Audio" rev 0x00: > apic 4 int 16 (irq 7) > azalia1: codecs: Realtek ALC888 > audio0 at azalia1 > pcib0 at pci0 dev 20 function 3 "ATI SB700 ISA" rev 0x00 > ppb2 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x00 > pci3 at ppb2 bus 3 > ohci4 at pci0 dev 20 function 5 "ATI SB700 USB" rev 0x00: apic 4 int > 18 (irq 10), version 1.0, legacy support > pchb1 at pci0 dev 24 function 0 "AMD AMD64 10h HyperTransport" rev 0x00 > pchb2 at pci0 dev 24 function 1 "AMD AMD64 10h Address Map" rev 0x00 > pchb3 at pci0 dev 24 function 2 "AMD AMD64 10h DRAM Cfg" rev 0x00 > km0 at pci0 dev 24 function 3 "AMD AMD64 10h Misc Cfg" rev 0x00 > pchb4 at pci0 dev 24 function 4 "AMD AMD64 10h Link Cfg" rev 0x00 > usb2 at ohci0: USB revision 1.0 > uhub2 at usb2 "ATI OHCI root hub" rev 1.00/1.00 addr 1 > usb3 at ohci1: USB revision 1.0 > uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1 > usb4 at ohci2: USB revision 1.0 > uhub4 at usb4 "ATI OHCI root hub" rev 1.00/1.00 addr 1 > usb5 at ohci3: USB revision 1.0 > uhub5 at usb5 "ATI OHCI root hub" rev 1.00/1.00 addr 1 > isa0 at pcib0 > isadma0 at isa0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pmsi0 at pckbc0 (aux slot) > pckbc0: using irq 12 for aux slot > wsmouse0 at pmsi0 mux 0 > pcppi0 at isa0 port 0x61 > midi0 at pcppi0: <PC speaker> > spkr0 at pcppi0 > it0 at isa0 port 0x2e/2: IT8716F rev 3, EC port 0xe80 > fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 > usb6 at ohci4: USB revision 1.0 > uhub6 at usb6 "ATI OHCI root hub" rev 1.00/1.00 addr 1 > mtrr: Pentium Pro MTRR support > vscsi0 at root > scsibus2 at vscsi0: 256 targets > softraid0 at root > root on sd0a swap on sd0b dump on sd0b > > arwen:/home/giannici# df > Filesystem 1K-blocks Used Avail Capacity Mounted on > /dev/sd0a 51606268 2927294 46098662 6% / > /dev/sd0e 178399396 1531342 167948086 1% /var > mfs:30101 967503 4 919124 0% /tmp > 195.103.207.9:/mail 2664997942 213100062 2318647984 8% /mail > > arwen:/home/giannici# mount > /dev/sd0a on / type ffs (local, softdep) > /dev/sd0e on /var type ffs (local, nodev, nosuid, softdep) > mfs:30101 on /tmp type mfs (asynchronous, local, nodev, nosuid, > size=1000000 1K-blocks) > 195.103.207.9:/mail on /mail type nfs (noatime, nodev, noexec, > nosuid, v3, udp, soft, intr, timeo=100, retrans=3) > > arwen:/home/giannici# disklabel sd0 > # /dev/rsd0c: > type: ESDI > disk: ESDI/IDE disk > label: WDC WD2500AAKS-0 > flags: > bytes/sector: 512 > sectors/track: 63 > tracks/cylinder: 255 > sectors/cylinder: 16065 > cylinders: 30401 > total sectors: 488397168 > rpm: 3600 > interleave: 1 > boundstart: 63 > boundend: 488392065 > drivedata: 0 > > 16 partitions: > # size offset fstype [fsize bsize cpg] > a: 104872257 63 4.2BSD 2048 16384 1 # / > b: 10490445 104872320 swap > c: 488397168 0 unused > d: 10490445 115362765 4.2BSD 2048 16384 1 > e: 362538855 125853210 4.2BSD 2048 16384 1 # /var > > > > -- > ___________________________________________________ > __ > |- giann...@neomedia.it > |ederico Giannici http://www.neomedia.it > ___________________________________________________ -- I know nothing except the fact of my ignorance -Socrates
