On Wed, Aug 25, 2010 at 08:12:34PM +0200, Pete Vickers wrote: > I have a SunBlade100 running 4.7RELEASE which I stuck a PCI/Cardbus adapter > in; and it appears to be recognised in dmesg: > > . . . > cbb0 at pci1 dev 2 function 0 "Ricoh 5C475 CardBus" rev 0x80: ivec 0x7d5 > cardslot0 at cbb0 slot 0 flags 0 > cardbus0 at cardslot0: bus 2 device 0 cacheline 0x0, lattimer 0x20 > pcmcia0 at cardslot0 > . . . > > (full dmesg at foot) > > > However whenever I insert a card into the adapter the machine panics. The same > happen if I insert the card before boot, whereupon it panics midway through > booting. I have tried various WLAN and GPRS cards. > > Before I go collecting ddb> trace/ps is this the expected behaviour ( e.g. a > known endien issue or suchlike) ?
I'm gonna say "not". Trace/ps would give me something to do while I ignore packing my apartment. > > BTW, I notice that PR3871 addressed the adapter itself (at least in i386). > > > > /Pete > > > > full dmesg: > > console is keyboard/display > Copyright (c) 1982, 1986, 1989, 1991, 1993 > The Regents of the University of California. All rights reserved. > Copyright (c) 1995-2010 OpenBSD. All rights reserved. http://www.OpenBSD.org > > OpenBSD 4.7 (GENERIC) #258: Wed Mar 17 23:40:34 MDT 2010 > dera...@sparc64.openbsd.org:/usr/src/sys/arch/sparc64/compile/GENERIC > real mem = 805306368 (768MB) > avail mem = 767369216 (731MB) > mainbus0 at root: Sun Blade 100 (UltraSPARC-IIe) > cpu0 at mainbus0: SUNW,UltraSPARC-IIe (rev 1.4) @ 502 MHz > cpu0: physical 16K instruction (32 b/l), 16K data (32 b/l), 256K external (64 > b/l) > psycho0 at mainbus0: pci108e,a001, impl 0, version 0, ign 7c0 > psycho0: bus range 0-1, PCI bus 0 > psycho0: dvma map c0000000-dfffffff > pci0 at psycho0 > ebus0 at pci0 dev 12 function 0 "Sun RIO EBus" rev 0x01 > "flashprom" at ebus0 addr 0-fffff not configured > clock1 at ebus0 addr 0-1fff: mk48t59 > ebus1 at pci0 dev 7 function 0 "Acer Labs M1533 ISA" rev 0x00 > "dma" at ebus1 addr 0-ffff ivec 0x2a not configured > power0 at ebus1 addr 800-82f ivec 0x20 > com0 at ebus1 addr 3f8-3ff ivec 0x2b: ns16550a, 16 byte fifo > com1 at ebus1 addr 2e8-2ef ivec 0x2b: ns16550a, 16 byte fifo > gem0 at pci0 dev 12 function 1 "Sun ERI Ether" rev 0x01: ivec 0x7c6, address > 00:03:ba:08:46:e8 > ukphy0 at gem0 phy 1: Generic IEEE 802.3u media interface, rev. 1: OUI > 0x0010dd, model 0x0002 > "Sun FireWire" rev 0x01 at pci0 dev 12 function 2 not configured > ohci0 at pci0 dev 12 function 3 "Sun USB" rev 0x01: ivec 0x7e4, version 1.0, > legacy support > alipm0 at pci0 dev 3 function 0 "Acer Labs M7101 Power" rev 0x00: 223KHz > clock > iic0 at alipm0 > "max1617" at alipm0 addr 0x18 skipped due to alipm0 bugs > "scm001" at alipm0 addr 0x20 skipped due to alipm0 bugs > spdmem0 at iic0 addr 0x50: 256MB SDRAM ECC PC133CL2 > spdmem1 at iic0 addr 0x51: 256MB SDRAM ECC PC133CL2 > spdmem2 at iic0 addr 0x52: 256MB SDRAM ECC PC133CL2 > autri0 at pci0 dev 8 function 0 "Acer Labs M5451 Audio" rev 0x01: ivec 0x7e3 > ac97: codec id 0x41445348 (Analog Devices AD1881A) > ac97: codec features headphone, Analog Devices Phat Stereo > audio0 at autri0 > midi0 at autri0: <4DWAVE MIDI UART> > pciide0 at pci0 dev 13 function 0 "Acer Labs M5229 UDMA IDE" rev 0xc3: DMA, > channel 0 configured to native-PCI, channel 1 configured to native-PCI > pciide0: using ivec 0x7cc for native-PCI interrupt > wd0 at pciide0 channel 0 drive 0: <WDC WD200BB-60DGA0> > wd0: 16-sector PIO, LBA, 9541MB, 19541088 sectors > atapiscsi0 at pciide0 channel 0 drive 1 > scsibus0 at atapiscsi0: 2 targets > cd0 at scsibus0 targ 0 lun 0: <ATAPI, DVD A DH20A4H, QP59> ATAPI 5/cdrom > removable > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 > cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 4 > pciide0: channel 1 disabled (no drives) > ppb0 at pci0 dev 5 function 0 "DEC 21152 PCI-PCI" rev 0x03 > pci1 at ppb0 bus 1 > ral0 at pci1 dev 1 function 0 "Ralink RT2560" rev 0x01: ivec 0x7ca, address > 00:11:50:a8:c8:a2 > ral0: MAC/BBP RT2560 (rev 0x04), RF RT2525 > cbb0 at pci1 dev 2 function 0 "Ricoh 5C475 CardBus" rev 0x80: ivec 0x7d5 > cardslot0 at cbb0 slot 0 flags 0 > cardbus0 at cardslot0: bus 2 device 0 cacheline 0x0, lattimer 0x20 > pcmcia0 at cardslot0 > machfb0 at pci0 dev 19 function 0 "ATI Rage XL" rev 0x27 > machfb0: ATY,RageXL, 1280x1024 > wsdisplay0 at machfb0 mux 1: console (std, sun emulation) > usb0 at ohci0: USB revision 1.0 > uhub0 at usb0 "Sun OHCI root hub" rev 1.00/1.00 addr 1 > uhidev0 at uhub0 port 2 configuration 1 interface 0 "Sun Microsystems Type 6 > Keyboard" rev 1.00/1.01 addr 2 > uhidev0: iclass 3/1 > ukbd0 at uhidev0: 8 modifier keys, 6 key codes, country code 19 > wskbd0 at ukbd0: console keyboard, using wsdisplay0 > uhidev1 at uhub0 port 4 configuration 1 interface 0 "Sun Microsystems Type 6 > Mouse" rev 1.00/1.02 addr 3 > uhidev1: iclass 3/1 > ums0 at uhidev1: 3 buttons > wsmouse0 at ums0 mux 0 > vscsi0 at root > scsibus1 at vscsi0: 256 targets > softraid0 at root > bootpath: /p...@1f,0/i...@d,0/d...@0,0 > root on wd0a swap on wd0b dump on wd0b
