In trying the latest snapshots on sparc64 servers, so far 3 of them all
give me the same errors. I can't use the -n flag anymore with rdate as
before.
It worked on 4.7 and before. Not sure of the exact date it stop working.
Any suggestions?
Best,
Daniel
Example:
# rdate -pcv ptbtime1.ptb.de
Sat Aug 14 20:29:05 EDT 2010
rdate: adjust local clock by 24 seconds
# rdate -pncv ptbtime1.ptb.de
Bus error (core dumped)
# rdate -pcv ptbtime1.ptb.de
Sat Aug 14 20:29:10 EDT 2010
rdate: adjust local clock by 24 seconds
# dmesg
OpenBSD 4.8 (GENERIC) #85: Mon Aug 9 12:05:43 MDT 2010
dera...@sparc64.openbsd.org:/usr/src/sys/arch/sparc64/compile/GENERIC
real mem = 536870912 (512MB)
avail mem = 515072000 (491MB)
mainbus0 at root: Sun Fire V100 (UltraSPARC-IIe 548MHz)
cpu0 at mainbus0: SUNW,UltraSPARC-IIe (rev 3.3) @ 548 MHz
cpu0: physical 16K instruction (32 b/l), 16K data (32 b/l), 512K
external (64 b/l)
psycho0 at mainbus0: SUNW,sabre, impl 0, version 0, ign 7c0
psycho0: bus range 0-0, PCI bus 0
psycho0: dvma map 60000000-7fffffff
pci0 at psycho0
ebus0 at pci0 dev 7 function 0 "Acer Labs M1533 ISA" rev 0x00
"dma" at ebus0 addr 0-ffff ivec 0x2a not configured
rtc0 at ebus0 addr 70-71: m5819
power0 at ebus0 addr 2000-2007 ivec 0x23
lom0 at ebus0 addr 8010-8011 ivec 0x2a: LOMlite2 rev 3.12
com0 at ebus0 addr 3f8-3ff ivec 0x2b: ns16550a, 16 byte fifo
com0: console
com1 at ebus0 addr 2e8-2ef ivec 0x2b: ns16550a, 16 byte fifo
"flashprom" at ebus0 addr 0-7ffff not configured
alipm0 at pci0 dev 3 function 0 "Acer Labs M7101 Power" rev 0x00: 74KHz
clock
iic0 at alipm0
"max1617" at alipm0 addr 0x18 skipped due to alipm0 bugs
spdmem0 at iic0 addr 0x57: 512MB SDRAM registered ECC PC133CL2
dc0 at pci0 dev 12 function 0 "Davicom DM9102" rev 0x31: ivec 0x7c6,
address 00:03:ba:85:a1:c3
amphy0 at dc0 phy 1: DM9102 10/100 PHY, rev. 0
dc1 at pci0 dev 5 function 0 "Davicom DM9102" rev 0x31: ivec 0x7dc,
address 00:03:ba:85:a1:c4
amphy1 at dc1 phy 1: DM9102 10/100 PHY, rev. 0
ohci0 at pci0 dev 10 function 0 "Acer Labs M5237 USB" rev 0x03: ivec
0x7e4, version 1.0, legacy support
pciide0 at pci0 dev 13 function 0 "Acer Labs M5229 UDMA IDE" rev 0xc3:
DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using ivec 0x7cc for native-PCI interrupt
pciide0: channel 0 disabled (no drives)
wd0 at pciide0 channel 1 drive 0: <ST340014A>
wd0: 16-sector PIO, LBA48, 38166MB, 78165360 sectors
atapiscsi0 at pciide0 channel 1 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-224E, P.9A> ATAPI 5/cdrom removable
wd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
cd0(pciide0:1:1): using PIO mode 4, DMA mode 2
usb0 at ohci0: USB revision 1.0
uhub0 at usb0 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1
softraid0 at root
bootpath: /p...@1f,0/i...@d,0/d...@2,0
root on wd0a swap on wd0b dump on wd0b
