On Tue, 3 Aug 2010 10:32:40 +0200
Alexandre Ratchov <a...@caoua.org> wrote:
> the device is spinning. Could you send a dmesg
> and confirm that if you run:
The dmesg was in my first mail, which did not arrive yet :(
I join a copy at the end of this mail.
> aucat -ddd -z 256
default: recording s16le,0:1,44100
default: playing s16le,0:1,44100
default: block size is 256 frames, using 46 blocks
defa...@default: rec=0:1 play=0:1 vol=32768
mplayer0: buffer size = 11264, play = s16le,0:1,44100
starting device
sock: wrote 40 bytes in 55860us
sio(default|): busy loop, disconnecting
device disappeared
closing device
> it exits very quicky (almost as soon as a client starts
> playing/recording) ?
It exists quickly, yes.
> Could you confirm that the following:
>
> aucat -ddd -z 256 -m play
>
> doesn't exit (sound quality degrades instead until the next
> stop/start cycle).
Seems good so far, sound is unstable but aucat does not exit.
dmesg :
OpenBSD 4.8-beta (GENERIC.MP) #293: Sun Aug 1 22:21:46 MDT 2010
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
RTC BIOS diagnostic error 11<memory_size>
cpu0: Intel(R) Core(TM)2 Duo CPU E8200 @ 2.66GHz ("GenuineIntel" 686-class)
2.67 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1
real mem = 2101956608 (2004MB)
avail mem = 2057592832 (1962MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 03/11/08, BIOS32 rev. 0 @ 0xffea0, SMBIOS
rev. 2.5 @ 0xf0450 (80 entries)
bios0: vendor Dell Inc. version "A09" date 03/11/2008
bios0: Dell Inc. OptiPlex 755
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP SSDT APIC BOOT ASF! MCFG HPET ____ SLIC
acpi0: wakeup devices VBTN(S4) PCI0(S5) PCI4(S5) PCI2(S5) PCI3(S5) PCI1(S5)
PCI5(S5) PCI6(S5) MOU_(S3) USB0(S3) USB1(S3) USB2(S3) USB3(S3) USB4(S3) USB5(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 332MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 Duo CPU E8200 @ 2.66GHz ("GenuineIntel" 686-class)
2.66 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1
ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 8
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 2 (PCI4)
acpiprt1 at acpi0: bus 1 (PCI2)
acpiprt2 at acpi0: bus -1 (PCI3)
acpiprt3 at acpi0: bus -1 (PCI1)
acpiprt4 at acpi0: bus -1 (PCI5)
acpiprt5 at acpi0: bus -1 (PCI6)
acpiprt6 at acpi0: bus 0 (PCI0)
acpicpu0 at acpi0
acpicpu1 at acpi0
acpibtn0 at acpi0: VBTN
bios0: ROM list: 0xc0000/0xb800! 0xcb800/0x2000! 0xcd800/0x2800!
cpu0: unknown Enhanced SpeedStep CPU, msr 0x0612081f0600081f
cpu0: using only highest and lowest power states
cpu0: Enhanced SpeedStep 2660 MHz: speeds: 2667, 2000 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82Q35 Host" rev 0x02
vga1 at pci0 dev 2 function 0 "Intel 82Q35 Video" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0 at vga1: apic 8 int 16 (irq 11)
drm0 at inteldrm0
"Intel 82Q35 Video" rev 0x02 at pci0 dev 2 function 1 not configured
"Intel 82Q35 HECI" rev 0x02 at pci0 dev 3 function 0 not configured
pciide0 at pci0 dev 3 function 2 "Intel 82Q35 PT IDER" rev 0x02: DMA
(unsupported), channel 0 wired to native-PCI, channel 1 wired to native-PCI
pciide0: using apic 8 int 18 (irq 9) for native-PCI interrupt
pciide0: channel 0 ignored (not responding; disabled or no drives?)
pciide0: channel 1 ignored (not responding; disabled or no drives?)
"Intel 82Q35 KT" rev 0x02 at pci0 dev 3 function 3 not configured
em0 at pci0 dev 25 function 0 "Intel ICH9 IGP AMT" rev 0x02: apic 8 int 21 (irq
3), address 00:1e:4f:c5:11:9f
uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x02: apic 8 int 16 (irq
11)
uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x02: apic 8 int 17 (irq
5)
ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x02: apic 8 int 22 (irq
5)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x02: apic 8 int
16 (irq 11)
azalia0: codecs: Analog Devices AD1984
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x02: apic 8 int 16 (irq
11)
pci1 at ppb0 bus 1
uhci2 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x02: apic 8 int 23 (irq
10)
uhci3 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x02: apic 8 int 17 (irq
5)
uhci4 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x02: apic 8 int 18 (irq
9)
ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x02: apic 8 int 23 (irq
10)
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb1 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x92
pci2 at ppb1 bus 2
ichpcib0 at pci0 dev 31 function 0 "Intel 82801IO LPC" rev 0x02: PM disabled
ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x02: apic 8 int 18
(irq 9), AHCI 1.2
ahci0: PHY offline on port 2
ahci0: PHY offline on port 3
ahci0: PHY offline on port 5
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, ST3250310AS, 3.AD> SCSI3 0/direct fixed
sd0: 238418MB, 512 bytes/sec, 488281250 sec total
cd0 at scsibus0 targ 1 lun 0: <TSSTcorp, DVD+-RW TS-H653B, D300> ATAPI 5/cdrom
removable
ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x02: apic 8 int 18
(irq 9)
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5
spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-5300CL5
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
uhub7 at uhub1 port 6 "Standard Microsystems product 0x2514" rev 2.00/0.00 addr
2
uhidev0 at uhub3 port 1 configuration 1 interface 0 "Logitech Optical USB
Mouse" rev 2.00/3.40 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
ugen0 at uhub6 port 1 "American Power Conversion Smart-UPS 750 FW:651.13.I USB
FW:7.3" rev 1.10/0.06 addr 2
uhidev1 at uhub5 port 2 configuration 1 interface 0 "Dell Dell USB Keyboard"
rev 1.10/3.52 addr 2
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 modifier keys, 6 key codes
wskbd0 at ukbd0: console keyboard, using wsdisplay0
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
