If you try to setup that interface with ifconfig and debug option is
there some helpful error description during log in to some network?
On Sat, Jul 3, 2010 at 11:42 AM, <czark...@gmail.com> wrote:
> Tomas Bodzar <tomas.bod...@gmail.com> wrote:
>
>> Then usbdevs -v will be helpful for sure
>
> $ usbdevs -vda 3 -f /dev/usb0
> Controller /dev/usb0:
> addr 3: high speed, power 500 mA, config 1, USB2.0 WLAN(0x171b),
ASUS(0x0b05), rev 48.02
> B zyd0
>
> OpenBSD 4.7 (GENERIC) #558: Wed Mar 17 20:46:15 MDT 2010
> B B dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: Intel(R) Pentium(R) M processor 1.00GHz ("GenuineIntel" 686-class) 1
GHz
> cpu0:
FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,
MMX,FXSR,SSE,SSE2,SS,TM,SBF,EST,TM2
> real mem B = 1324707840 (1263MB)
> avail mem = 1274814464 (1215MB)
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 10/16/07, BIOS32 rev. 0 @ 0xf0010,
SMBIOS rev. 2.3 @ 0xf92f0 (36 entries)
> bios0: vendor American Megatrends Inc. version "208" date 10/16/2007
> bios0: ASUSTeK Computer Inc. R2H
> acpi0 at bios0: rev 0
> acpi0: tables DSDT FACP APIC MCFG SLIC OEMB HPET SSDT
> acpi0: wakeup devices LAN0(S4) P0P1(S4) USB1(S3) USB2(S3) USB3(S3) USB4(S3)
EUSB(S3) MC97(S4) AZAL(S3) PWRB(S4) SLPB(S4)
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: apic clock running at 99MHz
> ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
> acpihpet0 at acpi0: 14318179 Hz
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus -1 (P0P2)
> acpiprt2 at acpi0: bus 1 (P0P1)
> acpiprt3 at acpi0: bus 2 (P0P4)
> acpiprt4 at acpi0: bus -1 (P0P5)
> acpiprt5 at acpi0: bus -1 (P0P6)
> acpiprt6 at acpi0: bus -1 (P0P7)
> acpiec0 at acpi0
> acpicpu0 at acpi0: C3, C2, C1, PSS
> acpitz0 at acpi0: critical temperature 105 degC
> acpiac0 at acpi0: AC unit offline
> acpibat0 at acpi0: BAT0 model "R2-2134" serial B type LIon oem "ASUSTEK"
> acpibtn0 at acpi0: PWRB
> acpibtn1 at acpi0: SLPB
> acpivideo0 at acpi0: VGA_
> acpivout0 at acpivideo0: CRTD
> acpivout1 at acpivideo0: TVOD
> acpivout2 at acpivideo0: LCDD
> acpivideo1 at acpi0: VGA_
> acpivout3 at acpivideo1: CRTD
> acpivout4 at acpivideo1: TVOD
> acpivout5 at acpivideo1: LCDD
> bios0: ROM list: 0xc0000/0xea00!
> cpu0: Enhanced SpeedStep 1078 MHz: speeds: 1000, 800, 600 MHz
> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82915GM Host" rev 0x04
> vga1 at pci0 dev 2 function 0 "Intel 82915GM Video" rev 0x04
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> intagp0 at vga1
> agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
> inteldrm0 at vga1: apic 1 int 16 (irq 11)
> drm0 at inteldrm0
> "Intel 82915GM Video" rev 0x04 at pci0 dev 2 function 1 not configured
> azalia0 at pci0 dev 27 function 0 "Intel 82801FB HD Audio" rev 0x04: apic 1
int 16 (irq 11)
> azalia0: codecs: Analog Devices/0x1986
> audio0 at azalia0
> ppb0 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x04: apic 1 int 16
(irq 11)
> pci1 at ppb0 bus 2
> re0 at pci1 dev 0 function 0 "Realtek 8101E" rev 0x01: RTL8101E (0x3400),
apic 1 int 16 (irq 11), address 00:1d:60:38:96:0e
> rlphy0 at re0 phy 7: RTL8201L 10/100 PHY, rev. 1
> uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x04: apic 1 int 23
(irq 5)
> uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x04: apic 1 int 19
(irq 6)
> uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x04: apic 1 int 18
(irq 3)
> uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x04: apic 1 int 16
(irq 11)
> ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x04: apic 1 int 23
(irq 5)
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xd4
> pci2 at ppb1 bus 1
> sdhc0 at pci2 dev 1 function 0 "Ricoh 5C822 SD/MMC" rev 0x19: apic 1 int 17
(irq 3)
> sdmmc0 at sdhc0
> ichpcib0 at pci0 dev 31 function 0 "Intel 82801FBM LPC" rev 0x04: PM
disabled
> pciide0 at pci0 dev 31 function 1 "Intel 82801FB IDE" rev 0x04: DMA, channel
0 configured to compatibility, channel 1 configured to compatibility
> wd0 at pciide0 channel 0 drive 0: <TOSHIBA MK8009GAH>
> wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
> pciide0: channel 1 disabled (no drives)
> usb1 at uhci0: USB revision 1.0
> uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb2 at uhci1: USB revision 1.0
> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb3 at uhci2: USB revision 1.0
> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb4 at uhci3: USB revision 1.0
> uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> isa0 at ichpcib0
> isadma0 at isa0
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pms0 mux 0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> mtrr: Pentium Pro MTRR support
> ugen0 at uhub0 port 1 "Syntek USB2.0" rev 2.00/0.05 addr 2
> zyd0 at uhub0 port 6 configuration 1 interface 0 "ASUS USB2.0 WLAN" rev
2.00/48.02 addr 3
> uhub5 at uhub0 port 7 "Standard Microsystems product 0x2502" rev 2.00/0.01
addr 4
> ugen1 at uhub5 port 1 "AuthenTec Fingerprint Sensor" rev 1.10/c.10 addr 5
> uhidev0 at uhub5 port 2 configuration 1 interface 0 "PANJIT PANJIT TouchSet
Digitizer" rev 1.10/1.03 addr 6
> uhidev0: iclass 3/0, 2 report ids
> uhts0 at uhidev0 reportid 1
> wsmouse1 at uhts0 mux 0
> ums0 at uhidev0 reportid 2: 0 button
> wsmouse2 at ums0 mux 0
> ubt0 at uhub4 port 2 "ASUS product 0x1712" rev 2.00/19.15 addr 2
> uhidev1 at uhub2 port 2 configuration 1 interface 0 " USB Keyboard" rev
1.10/1.10 addr 2
> uhidev1: iclass 3/1
> ukbd0 at uhidev1: 8 modifier keys, 6 key codes
> wskbd1 at ukbd0 mux 1
> wskbd1: connecting to wsdisplay0
> uhidev2 at uhub2 port 2 configuration 1 interface 1 " USB Keyboard" rev
1.10/1.10 addr 2
> uhidev2: iclass 3/0, 2 report ids
> uhid0 at uhidev2 reportid 1: input=1, output=0, feature=0
> uhid1 at uhidev2 reportid 2: input=3, output=0, feature=0
> vscsi0 at root
> scsibus0 at vscsi0: 256 targets
> softraid0 at root
> root on wd0a swap on wd0b dump on wd0b
> zyd0: HMAC ZD1211B, FW 47.25, RF AL2230, PA 0, address 00:1d:60:62:59:ef
> wskbd1: disconnecting from wsdisplay0
> wskbd1 detached
> ukbd0 detached
> uhidev1 detached
> uhid0 detached
> uhid1 detached
> uhidev2 detached
> uhidev1 at uhub2 port 2 configuration 1 interface 0 " USB Keyboard" rev
1.10/1.10 addr 2
> uhidev1: iclass 3/1
> ukbd0 at uhidev1: 8 modifier keys, 6 key codes
> wskbd1 at ukbd0 mux 1
> wskbd1: connecting to wsdisplay0
> uhidev2 at uhub2 port 2 configuration 1 interface 1 " USB Keyboard" rev
1.10/1.10 addr 2
> uhidev2: iclass 3/0, 2 report ids
> uhid0 at uhidev2 reportid 1: input=1, output=0, feature=0
> uhid1 at uhidev2 reportid 2: input=3, output=0, feature=0
> wskbd1: disconnecting from wsdisplay0
> wskbd1 detached
> ukbd0 detached
> uhidev1 detached
> uhid0 detached
> uhid1 detached
> uhidev2 detached
> uhidev1 at uhub2 port 2 configuration 1 interface 0 " USB Keyboard" rev
1.10/1.10 addr 2
> uhidev1: iclass 3/1
> ukbd0 at uhidev1: 8 modifier keys, 6 key codes
> wskbd1 at ukbd0 mux 1
> wskbd1: connecting to wsdisplay0
> uhidev2 at uhub2 port 2 configuration 1 interface 1 " USB Keyboard" rev
1.10/1.10 addr 2
> uhidev2: iclass 3/0, 2 report ids
> uhid0 at uhidev2 reportid 1: input=1, output=0, feature=0
> uhid1 at uhidev2 reportid 2: input=3, output=0, feature=0
>
> --
> Dmitrij D. Czarkoff
