Would love for someone to hit me with a clue stick here. Once I run
this command, I don't see anything--and the box instantly locks up.
On Fri, Jun 18, 2010 at 11:08 PM, Daniel Melameth <dan...@melameth.com>
wrote:
> On my firewall at home, on occasion, running systat queues leaves me with
an
> unresponsive system. pings are not returned and the keyboard at the
console
> is unresponsive. Sometimes the command works fine and sometimes it does
> not--though it does system the issue is more likely to occur when the
system
> has an uptime of more than a week or two. I'm uncertain how to
troubleshoot
> this further and I have been unable to reproduce the issue on other
> 4.7-stable systems (though these other systems are not running the same
> hardware and software).
>
> Any ideas appreciated.
>
>
>
> OpenBSD 4.7 (GENERIC) #0: Wed May 19 21:44:26 MDT 2010
> dan...@meth.internal.melameth.com:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: Intel Pentium III ("GenuineIntel" 686-class) 446 MHz
> cpu0:
>
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,
> SSE
> real mem = 334458880 (318MB)
> avail mem = 315371520 (300MB)
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 10/12/01, BIOS32 rev. 0 @ 0xfbf92,
> SMBIOS rev. 2.3 @ 0xec000 (45 entries)
> bios0: vendor TOSHIBA version "Version 2.60" date 10/12/2001
> bios0: TOSHIBA Satellite Pro 4600
> apm0 at bios0: Power Management spec V1.2
> apm0: battery life expectancy 100%
> apm0: AC on, battery charge high, estimated 2:12 hours
> acpi at bios0 function 0x0 not configured
> pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf01c0/144 (7 entries)
> pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
> pcibios0: PCI bus #5 is the last bus
> bios0: ROM list: 0xc0000/0xc000 0xe0000/0x10000!
> cpu0 at mainbus0: (uniprocessor)
> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82815 Host" rev 0x11
> intelagp0 at pchb0
> agp0 at intelagp0: aperture at 0xf0000000, size 0x2400000
> ppb0 at pci0 dev 1 function 0 "Intel 82815 AGP" rev 0x11
> pci1 at ppb0 bus 1
> vga1 at pci1 dev 0 function 0 "Trident CyberBlade XP" rev 0x63
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x03
> pci2 at ppb1 bus 2
> mem address conflict 0x14000000/0x1000
> mem address conflict 0x14001000/0x1000
> fxp0 at pci2 dev 8 function 0 "Intel 82562" rev 0x03, i82562: irq 11,
> address 00:00:39:a4:df:32
> inphy0 at fxp0 phy 1: i82562ET 10/100 PHY, rev. 0
> cbb0 at pci2 dev 13 function 0 "Toshiba ToPIC100 CardBus" rev 0x31: irq 11
> cbb1 at pci2 dev 13 function 1 "Toshiba ToPIC100 CardBus" rev 0x31: irq 11
> cardslot0 at cbb0 slot 0 flags 0
> cardbus0 at cardslot0: bus 4 device 0 cacheline 0x0, lattimer 0x0
> pcmcia0 at cardslot0
> cardslot1 at cbb1 slot 1 flags 0
> cardbus1 at cardslot1: bus 5 device 0 cacheline 0x0, lattimer 0x0
> pcmcia1 at cardslot1
> ichpcib0 at pci0 dev 31 function 0 "Intel 82801BAM LPC" rev 0x03: 24-bit
> timer at 3579545Hz
> pciide0 at pci0 dev 31 function 1 "Intel 82801BAM IDE" rev 0x03: DMA,
> channel 0 wired to compatibility, channel 1 wired to compatibility
> wd0 at pciide0 channel 0 drive 0: <TOSHIBA MK6026GAX>
> wd0: 16-sector PIO, LBA, 57231MB, 117210240 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
> atapiscsi0 at pciide0 channel 1 drive 0
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <TOSHIBA, DVD-ROM SD-C2502, 1313> ATAPI
> 5/cdrom removable
> cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
> uhci0 at pci0 dev 31 function 2 "Intel 82801BA USB" rev 0x03: irq 11
> uhci1 at pci0 dev 31 function 4 "Intel 82801BA USB" rev 0x03: irq 11
> auich0 at pci0 dev 31 function 5 "Intel 82801BA AC97" rev 0x03: irq 11,
ICH2
> AC97
> ac97: codec id 0x594d4800 (Yamaha YMF743-S)
> ac97: codec features 18 bit DAC, No 3D Stereo
> audio0 at auich0
> "Intel 82801BA Modem" rev 0x03 at pci0 dev 31 function 6 not configured
> isa0 at ichpcib0
> isadma0 at isa0
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pmsi0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pmsi0 mux 0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> lpt0 at isa0 port 0x378/4 irq 7
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> usb0 at uhci0: USB revision 1.0
> uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb1 at uhci1: USB revision 1.0
> uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> biomask ef6d netmask ef6d ttymask ffff
> mtrr: Pentium Pro MTRR support
> fxp1 at cardbus0 dev 0 function 0 "Intel 8255x" rev 0x09: irq 11, address
> 00:a0:c9:bc:ad:ad
> inphy1 at fxp1 phy 1: i82555 10/100 PHY, rev. 4
> vscsi0 at root
> scsibus1 at vscsi0: 256 targets
> softraid0 at root
> fxp2 at cardbus1 dev 0 function 0 "Intel 8255x" rev 0x09: irq 11, address
> 00:03:47:18:1f:5d
> inphy2 at fxp2 phy 1: i82555 10/100 PHY, rev. 4
> root on wd0a swap on wd0b dump on wd0b
> WARNING: / was not properly unmounted
