> I am having the same problem on a Lenovo R60e running snapshots from
> May12th and May 22nd.
>
> Looks like it may be "fixed":
> http://marc.info/?l=openbsd-cvs&m=127457255931742&w=2 , will try the
> next snapshot.
I get the error on a new snapshot. (Last used 4.6, no idea if this occurred
in snapshots in between.)
Jun 13 13:20:48 pinetree /bsd: inteldrm0: gpu hung!
Jun 13 13:20:48 pinetree /bsd: no reset function for chipset.
Xorg.0.log, dmesg:
(--) checkDevMem: using aperture driver /dev/xf86
(--) Using wscons driver on /dev/ttyC4 in pcvt compatibility mode (version 3.32
)
X.Org X Server 1.6.5
Release Date: 2009-10-11
X Protocol Version 11, Revision 0
Build Operating System: OpenBSD 4.7 i386
Current Operating System: OpenBSD pinetree.gateway.2wire.net 4.7 GENERIC.MP#36
i386
Build Date: 02 June 2010 01:40:17AM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Jun 13 13:20:06 2010
(II) Loader magic: 0x7ec0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on openbsd
(--) PCI:*(0:0:2:0) 8086:2572:1028:0151 Intel 82865G Video rev 2, Mem @ 0xe8000
000/134217728, 0xfeb80000/524288, I/O @ 0x0000ed98/8
(==) Using default built-in configuration (21 lines)
(==) --- Start of built-in configuration ---
Section "Device"
Identifier "Builtin Default intel Device 0"
Driver "intel"
EndSection
Section "Screen"
Identifier "Builtin Default intel Screen 0"
Device "Builtin Default intel Device 0"
EndSection
Section "Device"
Identifier "Builtin Default vesa Device 0"
Driver "vesa"
EndSection
Section "Screen"
Identifier "Builtin Default vesa Screen 0"
Device "Builtin Default vesa Device 0"
EndSection
Section "ServerLayout"
Identifier "Builtin Default Layout"
Screen "Builtin Default intel Screen 0"
Screen "Builtin Default vesa Screen 0"
EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default intel Screen 0" (0)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default intel Device 0"
(==) No monitor specified for screen "Builtin Default intel Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default vesa Screen 0" (1)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default vesa Device 0"
(==) No monitor specified for screen "Builtin Default vesa Screen 0".
Using a default monitor configuration.
(==) Not automatically adding devices
(==) Not automatically enabling devices
(==) FontPath set to:
/usr/X11R6/lib/X11/fonts/misc/,
/usr/X11R6/lib/X11/fonts/TTF/,
/usr/X11R6/lib/X11/fonts/OTF,
/usr/X11R6/lib/X11/fonts/Type1/,
/usr/X11R6/lib/X11/fonts/100dpi/,
/usr/X11R6/lib/X11/fonts/75dpi/
(==) ModulePath set to "/usr/X11R6/lib/modules"
(==) |-->Input Device "<default pointer>"
(==) |-->Input Device "<default keyboard>"
(==) The core pointer device wasn't specified explicitly in the layout.
Using the default mouse configuration.
(==) The core keyboard device wasn't specified explicitly in the layout.
Using the default keyboard configuration.
(II) System resource ranges:
[0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[3] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[4] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/X11R6/lib/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "intel"
(II) Loading /usr/X11R6/lib/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 2.9.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "vesa"
(II) Loading /usr/X11R6/lib/modules/drivers//vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 2.3.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.4.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) LoadModule: "kbd"
(II) Loading /usr/X11R6/lib/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
(II) VESA: driver for VESA chipsets: vesa
(II) Primary Device is: PCI 0...@00:02:0
(WW) Falling back to old probe method for vesa
(II) resource ranges after probing:
[0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[3] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[4] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 0.1.0
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
drmOpenDevice: node name is /dev/drm0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/drm0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) intel(0): Creating default Display subsection in Screen section
"Builtin Default intel Screen 0" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 865G
(--) intel(0): Chipset: "865G"
(--) intel(0): Linear framebuffer at 0xE8000000
(--) intel(0): IO registers at addr 0xFEB80000 size 524288
(WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
(II) intel(0): No SDVO device is found in VBT
(II) intel(0): 1 display pipe available.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA has no monitor section
(II) intel(0): I2C bus "DVODDC_D" initialized.
(II) Loading sub module "sil164"
(II) LoadModule: "sil164"
(II) Loading /usr/X11R6/lib/modules/drivers//sil164.so
(II) Module sil164: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) Loading sub module "ch7xxx"
(II) LoadModule: "ch7xxx"
(II) Loading /usr/X11R6/lib/modules/drivers//ch7xxx.so
(II) Module ch7xxx: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) Loading sub module "ivch"
(II) LoadModule: "ivch"
(II) Loading /usr/X11R6/lib/modules/drivers//ivch.so
(II) Module ivch: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVOI2C_B" initialized.
(II) Loading sub module "tfp410"
(II) LoadModule: "tfp410"
(II) Loading /usr/X11R6/lib/modules/drivers//tfp410.so
(II) Module tfp410: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) intel(0): I2C bus "DVOI2C_B" removed.
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) Loading sub module "ch7017"
(II) LoadModule: "ch7017"
(II) Loading /usr/X11R6/lib/modules/drivers//ch7017.so
(II) Module ch7017: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVODDC_D" removed.
(==) intel(0): Write-combining range (0xa0000,0x10000) was already clear
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at addr
ess 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "WDE", prod id 5240
(II) intel(0): Using EDID range info for horizontal sync
(II) intel(0): Using EDID range info for vertical refresh
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1920x1200"x0.0 154.00 1920 1968 2000 2080 1200 1203
1209 1235 +hsync -vsync (74.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 62
8 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 62
5 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500
-hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520
-hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525
-hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525
-hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025
1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 77
2 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 77
7 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 77
7 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 62
5 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 66
6 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 80
9 831 -hsync +vsync (49.7 kHz)
(II) intel(0): Modeline "1920x1200"x0.0 193.25 1920 2056 2256 2592 1200 1203
1209 1245 -hsync +vsync (74.6 kHz)
(II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 90
9 934 -hsync +vsync (55.9 kHz)
(II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053
1059 1089 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201
1204 1250 +hsync +vsync (75.0 kHz)
(II) intel(0): EDID vendor "WDE", prod id 5240
(II) intel(0): Output VGA connected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output VGA using initial mode 1920x1200
(==) intel(0): Write-combining range (0xa0000,0x10000) was already clear
(II) intel(0): detected 128 kB GTT.
(II) intel(0): detected 892 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(**) intel(0): Display dimensions: (550, 310) mm
(**) intel(0): DPI set to (88, 98)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) UnloadModule: "vesa"
(II) Unloading /usr/X11R6/lib/modules/drivers//vesa_drv.so
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[3] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[4] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) intel(0): Kernel reported 112640 total, 0 used
(II) intel(0): I830CheckAvailableMemory: 450560 kB available
(II) intel(0): [DRI2] Setup complete
(**) intel(0): Framebuffer compression disabled
(**) intel(0): Tiling enabled
(**) intel(0): SwapBuffers wait enabled
(==) intel(0): VideoRam: 131072 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) intel(0): Write-combining range (0xa0000,0x10000) was already clear
(II) UXA(0): Driver registered support for the following operations:
(II) solid
(II) copy
(II) composite (RENDER acceleration)
(II) put_image
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x07fff000 (pgoffset 32767)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x000df000: end of stolen memory
(II) intel(0): 0x000df000-0x07ffefff: DRI memory manager (130176 kB)
(II) intel(0): 0x07fff000-0x07ffffff: overlay registers (4 kB, 0x000000001cd760
00 physical
)
(II) intel(0): 0x08000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x000df000: start of memory manager
(II) intel(0): 0x01000000-0x01ffffff: front buffer (16384 kB) X tiled
(II) intel(0): 0x00100000-0x00104fff: HW cursors (20 kB)
(II) intel(0): 0x07fff000: end of memory manager
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Output VGA is connected to pipe A
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: DRI2 Enabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
(II) AIGLX: Loaded and initialized /usr/X11R6/lib/modules/dri/i915_dri.so
(II) GLX: Initialized DRI2 GL provider for screen 0
(II) intel(0): Setting screen physical size to 550 x 309
(WW) <default pointer>: No Device specified, looking for one...
(II) <default pointer>: found Device "/dev/wsmouse"
(**) <default pointer>: Protocol: WSMouse
(**) Option "CorePointer"
(**) <default pointer>: always reports core events
(**) Option "Device" "/dev/wsmouse"
(==) <default pointer>: Emulate3Buttons, Emulate3Timeout: 50
(**) <default pointer>: ZAxisMapping: buttons 4 and 5
(**) <default pointer>: Buttons: 9
(II) XINPUT: Adding extended input device "<default pointer>" (type: MOUSE)
(**) <default pointer>: (accel) keeping acceleration scheme 1
(**) <default pointer>: (accel) filter chain progression: 2.00
(**) <default pointer>: (accel) filter stage 0: 20.00 ms
(**) <default pointer>: (accel) set acceleration profile 0
(**) Option "CoreKeyboard"
(**) <default keyboard>: always reports core events
(**) Option "Protocol" "standard"
(**) <default keyboard>: Protocol: standard
(--) <default keyboard>: using wscons layout us
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) <default keyboard>: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) <default keyboard>: XkbModel: "pc105"
(**) Option "XkbLayout" "us"
(**) <default keyboard>: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) <default keyboard>: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "<default keyboard>" (type: KEYBOARD)
(EE) intel(0): Failed to submit batch buffer, expect rendering corruption or ev
en a frozen display: Input/output error.
OpenBSD 4.7-current (GENERIC.MP) #36: Thu Jun 10 00:25:28 MDT 2010
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Pentium(R) 4 CPU 2.80GHz ("GenuineIntel" 686-class) 2.80 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,C
FLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR
real mem = 534806528 (510MB)
avail mem = 508575744 (485MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 06/26/06, BIOS32 rev. 0 @ 0xffe90, SMBIOS
rev. 2.3 @ 0xf0450 (69 entries)
bios0: vendor Dell Computer Corporation version "A07" date 06/26/2006
bios0: Dell Computer Corporation OptiPlex GX270
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP SSDT APIC BOOT ASF!
acpi0: wakeup devices VBTN(S4) PCI0(S3) USB0(S3) USB1(S3) USB2(S3) USB3(S3) PCI
1(S5) KBD_(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 199MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Pentium(R) 4 CPU 2.80GHz ("GenuineIntel" 686-class) 2.80 GHz
cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,C
FLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 2
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (PCI1)
acpicpu0 at acpi0
acpicpu1 at acpi0
acpibtn0 at acpi0: VBTN
bios0: ROM list: 0xc0000/0xa800 0xca800/0x1800!
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82865G Host" rev 0x02
vga1 at pci0 dev 2 function 0 "Intel 82865G Video" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xe8000000, size 0x8000000
inteldrm0 at vga1: apic 2 int 16 (irq 11)
drm0 at inteldrm0
uhci0 at pci0 dev 29 function 0 "Intel 82801EB/ER USB" rev 0x02: apic 2 int 16
(irq 11)
uhci1 at pci0 dev 29 function 1 "Intel 82801EB/ER USB" rev 0x02: apic 2 int 19
(irq 10)
uhci2 at pci0 dev 29 function 2 "Intel 82801EB/ER USB" rev 0x02: apic 2 int 18
(irq 9)
uhci3 at pci0 dev 29 function 3 "Intel 82801EB/ER USB" rev 0x02: apic 2 int 16
(irq 11)
ehci0 at pci0 dev 29 function 7 "Intel 82801EB/ER USB2" rev 0x02: apic 2 int 23
(irq 5)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb0 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xc2
pci1 at ppb0 bus 1
em0 at pci1 dev 12 function 0 "Intel PRO/1000MT (82540EM)" rev 0x02: apic 2 int
18 (irq 9), address 00:0d:56:96:15:61
ichpcib0 at pci0 dev 31 function 0 "Intel 82801EB/ER LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801EB/ER IDE" rev 0x02: DMA, channel
0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <ST340014A>
wd0: 16-sector PIO, LBA48, 38146MB, 78125000 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <SAMSUNG, CD-R/RW SW-252S, R901> ATAPI 5/cdrom re
movable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
pciide1 at pci0 dev 31 function 2 "Intel 82801EB SATA" rev 0x02: DMA, channel 0
configured to native-PCI, channel 1 configured to native-PCI
pciide1: using apic 2 int 18 (irq 9) for native-PCI interrupt
ichiic0 at pci0 dev 31 function 3 "Intel 82801EB/ER SMBus" rev 0x02: apic 2 int
17 (irq 3)
iic0 at ichiic0
spdmem0 at iic0 addr 0x52: 512MB DDR SDRAM non-parity PC2700CL2.5
auich0 at pci0 dev 31 function 5 "Intel 82801EB/ER AC97" rev 0x02: apic 2 int 1
7 (irq 3), ICH5 AC97
ac97: codec id 0x41445374 (Analog Devices AD1981B)
ac97: codec features headphone, 20 bit DAC, No 3D Stereo
audio0 at auich0
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
mtrr: Pentium Pro MTRR support
umass0 at uhub0 port 8 configuration 1 interface 0 "Prolific Technology Inc. Ma
ss Storage Device" rev 2.00/1.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd0 at scsibus1 targ 1 lun 0: <SAMSUNG, HM121HC, LS10> SCSI0 0/direct fixed
sd0: 114473MB, 512 bytes/sec, 234441648 sec total
uhidev0 at uhub2 port 2 configuration 1 interface 0 "Logitech Trackball" rev 1.
10/2.20 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
inteldrm0: gpu hung!
no reset function for chipset.
