I just got a semi-new HP laptop and it fails to boot unless I disable
acpi. This isn't a big deal in itself, but it seems that it doesn't
use both cores of the CPU when this is done. Is this normal?
It's an HP ProBook 4510s if that's at all interesting...
Included are the dmesg from when it fails to boot including trace and
ps data (all typed by hand, so I hope it helps! =) and a dmesg with acpi
disabled.
[ using 707600 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights
reserved. Copyright (c) 1995-2010 OpenBSD. All rights reserved.
http://www.OpenBSD.org
OpenBSD 4.7 (GENERIC.MP) #449: Wed Mar 17 20:55:07 MDT 2010
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
RTC BIOS diagnostic error
7f<ROM_cksum,config_unit,memory_size,fixed_disk,invalid_time> cpu0:
Intel(R) Core(TM)2 Duo CPU T6570 @ 2.10GHz ("GenuineIntel" 686-class)
2.10 GHz cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
real mem = 2072080384 (1976MB) avail mem = 1998913536 (1906MB) RTC
BIOS diagnostic error
7f<ROM_cksum,config_unit,memory_size,fixed_disk,invalid_time> mainbus0
at root bios0 at mainbus0: AT/286+ BIOS, date 09/15/09, SMBIOS rev. 2.4
@ 0x7bac3000 (21 entries) bios0: vendor Hewlett-Packard version "68PZI
Ver. F.0F" date 10/20/2009 bios0: Hewlett-Packard HP ProBook 4510s
acpi0 at bios0: rev 2 acpi0: tables DSDT FACP HPET APIC MCFG ASF! SSDT
SLIC SSDT SSDT SSDT acpi0: wakeup devices LANC(S5) HDEF(S4) RP02(S5)
WNIC(S5) RP03(S5) ECF0(S5) RP05(S5) ECF0(S5) RP06(S5) NIC_(S5) USB1(S3)
USB2(S3) USB3(S3) USB4(S3) USB5(S3) USB6(S3) U6RM(S3) EHCI(S3) EHC2(S3)
PCIB(S5) HST1)S5) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpihpet0 at
acpi0: 14318179 Hz acpimadt0 at acpi0 addr0xfee00000: PC-AT compat cpu0
at mainbus0: apid 0 (boot processor) cpu0: apic clock running at 199MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 Duo CPU T6570 @ 2.10GHz ("GenuineIntel"
686-class) 2.10 GHz cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins ioapic0:
misconfigured as apic 0, remapped to apid 1 acpiprt0 at acpi0: bus -1
(PEGP) acpiprt1 at acpi0: bus 1 (RP01)
acpiprt2 at acpi0: bus 2 (RP02)
acpiprt3 at acpi0: bus 3 (RP03)
acpiprt4 at acpi0: bus 68 (RP05)
acpiprt5 at acpi0: bus 133 (RP06)
acpiprt6 at acpi0: bus 134 (PCIB)
acpiprt7 at acpi0: bus 0 (PCI0)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2, C1, PSS
acpicpu1 at acpi0: C3, C2, C1, PSS
acpipwrres0 at acpi0: APPR
acpipwrres1 at acpi0: COMP
acpipwrres2 at acpi0: LPP_
acpipwrres3 at acpi0: PFN6
acpipwrres4 at acpi0: PFN7
acpipwrres5 at acpi0: PFN8
acpipwrres6 at acpi0: PFN9
acpipwrres7 at acpi0: PFNA
acpipwrres8 at acpi0: PFNB
acpipwrres9 at acpi0: PGF0
acpitz0 at acpi0: critical temperature 108 degC
acpipwrres10 at acpi0: PFN0
acpipwrres11 at acpi0: PFN1
acpipwrres12 at acpi0: PFN2
acpipwrres13 at acpi0: PFN3
acpipwrres14 at acpi0: PFN4
acpipwrres15 at acpi0: PFN5
acpitz1 at acpi0: critical temperature 105 degC
acpitz2 at acpi0: critical temperature 108 degC
acpitz3 at acpi0: critical temperature 105 degC
acpitz4 at acpi0: critical temperature 108 degC
acpitz5 at acpi0acpitz5: FDTZ: failed to read _TMP
acpibat1 at acpi0: BAT1 not present
acpiac0 at acpi0: AC unit offline
acpibtn0 at acpi0: SLPB
acpibtn1 at acpi0: LID_
acpivideo0 at acpi0: DGFX
acpivout0 at acpivideo0: LCD_
acpivout1 at acpivideo0: CRT_
acpivout2 at acpivideo0: TV_
acpivout3 at acpivideo0: DVI_
acpivout4 at acpivideo0: DD04
acpivideo1 at acpi0: GFX0
acpivout5 at acpivideo1: DD02
bios0: ROM list: 0xc0000/0xfe00! 0xd0000/0x1000 0xd1000/0x10000
cpu0: Enhanced SpeedStep 2095 MHz: speeds: 2101, 2100, 1600, 1200 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07
vga1 at pci0 dev 2 function 0 "Intel GM45 Video" rev 0x07
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0x80000000, size 0x10000000
inteldrm0 at vga1: apic 1 int 16 (irq 10)
drm0 at inteldrm0
"Intel GM45 Video" rev 0x07 at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 26 function 0 "Intel 82801I USB rev 0x03: apic 1 int
16 (irq 10) uhci1 at pci0 dev 26 function 1 "Intel 82801I USB rev 0x03:
apic 1 int 17 (irq 11) uhci2 at pci0 dev 26 function 2 "Intel 82801I
USB rev 0x03: apic 1 int 18 (irq 10) ehci0 at pci0 dev 26 function 7
"Intel 82801I USB rev 0x03: apic 1 int 19 (irq 10) usb0 at ehci0: USB
revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia 0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03:
apic 1 int 17 (irq 11) azalia0: codecs: Analog Devices AD1984A,
Intel/0x2802, using Analog Devices AD1984A audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: apic 1 int
16 (irq 10) pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: apic 1 int
17 (irq 11) pci2 at ppb1 bus 2
iwn0 at pci2 dev 0 function 0 "Intel WiFi Link 5100" rev 0x00: apic 1
int 17 (irq 11), MIMO 1T2R, MoW, address 00:26:c6:0d:99:44 ppb2 at pci0
dev 28 function 2 "Intel 82801I PCIE" rev 0x03: apic 1 int 18 (itq 10)
pci3 at ppb2 bus 3 ppb3 at pci0 dev 28 function 4 "Intel 82801I PCIE"
rev 0x03: apic 1 int 16 (irq 10) pci4 at ppb3 bus 68
ppb4 at pci0 dev 28 function 5 "Intel 82801I PCIE" rev 0x03: apic 1 int
17 (irq 11) pci5 at ppb4 bus 133
mskc0 at pci5 dev 0 function 0 "Marvell Yukon 88E8072" rev 0x10,
Yukon-2 Extreme rev. B0 (0x2): apic 1 int 17 (irq 11) msk0 at mskc0
port A: address 18:a9:05:cf:b6:67 eephy0 at msk0 phy 0: 88E1149 Gigabit
PHY, rev. 1 uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev
0x03: apic 1 int 20 (irq 10) uhci4 at pci0 dev 29 function 1 "Intel
82801I USB" rev 0x03: apic 1 int 22 (irq 10) uhci5 at pci0 dev 29
function 2 "Intel 82801I USB" rev 0x03: apic 1 int 18 (irq 10) ehci1 at
pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 20 (irq
10) usb1 at ehci1: USB revision 2.0 uhub1 at usb1 "Intel EHCI root hub"
rev 2.00/1.00 addr 1 ppb5 at pci0 dev 30 function 0 "Intel 82801BAM
Hub-to-PCI" rev 0x93 pci6 at ppb5 bus 134
pcib0 at pci0 dev 31 function 0 "Intel 82801IBM LPC" rev 0x03
ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: apic 1
int 21 (irq 10), AHCI 1.2 scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, ST9250410AS, 0006> SCSI3 0/direct
fixed sd0: 238475MB, 512 bytes/sec, 488397168 sec total
cd0 at scsibus0 targ 1 lun 0: <hp, DVDRAM GT20L, DC05> ATAPI 5/cdrom
removable usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdiaplsy0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcpp0: <PC speaker>
spkr0 at pcppi0
npx0 at isa port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
copyvalue: efff0021Store to default type! efff0021
88f5 Called: \_SB_.PCI0.LPCB.EC0_.RPPC
local0: 0xd2b741c4 cnt:01 stk:60 integer: 2
local1: 0xd2b77f04 cnt:01 stk:61 integer: 0
local2: 0xd2b78dc4 cnt:02 stk:62 objref: 0xd2b8c1c4 index:0
opcode:CondRef uvm_fault(0xd08bc880, 0xefffe000, 0, 1) -> d
kernel: page fault trap, code=0
Stopped at aml_nodename+0x1b: pushl 0(%ebx)
ddb{0}> trace
aml_nodename(efffeecc, d2b8c1c4,0,d08d3d00,d08721b8) at
aml_nodename+0x1b aml_showvalue(d2b70144,0,d08d3d21,de2f6d0c) at
aml_showvalue+0x2dd _aml_die(d0863015,a62,d0863020,efff0021,d2b7a8c4)
at _aml_die+0xf0 aml_xstore(d2b7a8c4,d2b89404,0,0,d2b55a44) at
aml_xstore+0x1c2 aml_xparse(d2b7a8c4, 54,d0863256d2b55a04,d2b65744) at
aml_xparse+0x5dd aml_xeval(d2b65744,d2b55a04,54,0,0) at aml_xeval+0x15c
aml_xparse(d2b65744,54,d0863256,d2b55884,de2f6ec4) at aml_xparse+0x515
aml_xeval(0,d2b55884,74,0,0,1,de2f6f0c,d0702081) at aml_xeval+0x15c
aml_evalnode(d2b03c00,d2b558c4,0,0,0,62,0,d0702531) at aml_evalnode+0x57
acpiec_sci_event(d2b07000,420,2,40) at acpiec_sci_event+0x74
acpiec_gpehandler(d2b03c00,16,d2b07000,1) at acpiec_gpehandler+0x87
acpi_isr_thread(d2b6d8c0) at acpi_isr_thread+0x176
Bad frame pointer: 0xd0a43e88
ddb{0}> ps
PID PPID PGRP UID S FLAGS WAIT COMMAND
16 0 0 0 3 0x2100200 pftm pfpurge
15 0 0 0 3 0x2100200 config usb7
14 0 0 0 3 0x2100200 config usb6
13 0 0 0 3 0x2100200 config usb5
12 0 0 0 3 0x2100200 config usb4
11 0 0 0 3 0x2100200 config usb3
10 0 0 0 3 0x2100200 config usb2
9 0 0 0 3 0x2100200 usbdly usb1
8 0 0 0 3 0x2100200 usbtsk usbtask
7 0 0 0 3 0x2100200 usbdly usb0
* 6 0 0 0 7 0x2100200 acpi0
5 0 0 0 3 0x40100200 idle1
4 0 0 0 3 0x2100200 bored syswq
3 0 0 0 3 0x40100200 idle0
2 0 0 0 3 0x2100200 kmalloc kmthread
1 0 0 0 3 0x2100200 initexec swapper
0 0 0 0 3 0x2100200 cfpend swapper
ddb{0}>
DMESG with acpi disabled:
OpenBSD 4.7 (GENERIC.MP) #449: Wed Mar 17 20:55:07 MDT 2010
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
RTC BIOS diagnostic error
7f<ROM_cksum,config_unit,memory_size,fixed_disk,invalid_time> cpu0:
Intel(R) Core(TM)2 Duo CPU T6570 @ 2.10GHz ("GenuineIntel" 686-class)
2.10 GHz cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
real mem = 2072080384 (1976MB) avail mem = 1998913536 (1906MB) RTC
BIOS diagnostic error
7f<ROM_cksum,config_unit,memory_size,fixed_disk,invalid_time> mainbus0
at root bios0 at mainbus0: AT/286+ BIOS, date 09/15/09, SMBIOS rev. 2.4
@ 0x7bac3000 (21 entries) bios0: vendor Hewlett-Packard version "68PZI
Ver. F.0F" date 10/20/2009 bios0: Hewlett-Packard HP ProBook 4510s acpi
at bios0 function 0x0 not configured pcibios at bios0 function 0x1a not
configured bios0: ROM list: 0xc0000/0xfe00! 0xd0000/0x1000
0xd1000/0x1000 cpu0 at mainbus0: (uniprocessor)
cpu0: unknown Enhanced SpeedStep CPU, msr 0x06114a2306004a23
cpu0: using only highest and lowest power states
cpu0: Enhanced SpeedStep 2095 MHz: speeds: 14800, 1200 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07
vga1 at pci0 dev 2 function 0 "Intel GM45 Video" rev 0x07
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0x80000000, size 0x10000000
inteldrm0 at vga1: irq 10
drm0 at inteldrm0
"Intel GM45 Video" rev 0x07 at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: irq 10
uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: irq 11
uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: irq 10
ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: irq 10
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: irq
11 azalia0: codecs: Analog Devices AD1984A, Intel/0x2802, using Analog
Devices AD1984A audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: irq 10
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: irq 11
pci2 at ppb1 bus 2
iwn0 at pci2 dev 0 function 0 "Intel WiFi Link 5100" rev 0x00: irq 11,
MIMO 1T2R, MoW, address 00:26:c6:0d:99:44 ppb2 at pci0 dev 28 function
2 "Intel 82801I PCIE" rev 0x03: irq 10 pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x03: irq 10
pci4 at ppb3 bus 68
ppb4 at pci0 dev 28 function 5 "Intel 82801I PCIE" rev 0x03: irq 11
pci5 at ppb4 bus 133
mskc0 at pci5 dev 0 function 0 "Marvell Yukon 88E8072" rev 0x10,
Yukon-2 Extreme rev. B0 (0x2): irq 11 msk0 at mskc0 port A: address
18:a9:05:cf:b6:67 eephy0 at msk0 phy 0: 88E1149 Gigabit PHY, rev. 1
uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: irq 10
uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: irq 10
uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: irq 10
ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: irq 10
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb5 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93
pci6 at ppb5 bus 134
pcib0 at pci0 dev 31 function 0 "Intel 82801IBM LPC" rev 0x03
ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: irq 10,
AHCI 1.2 scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, ST9250410AS, 0006> SCSI3 0/direct
fixed sd0: 238475MB, 512 bytes/sec, 488397168 sec total
cd0 at scsibus0 targ 1 lun 0: <hp, DVDRAM GT20L, DC05> ATAPI 5/cdrom
removable usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
biomask effd netmask effd ttymask ffff
mtrr: Pentium Pro MTRR support
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
--TimH
