Hello, I'm using the german provider strato.de and had to jump through few hoops to install (unsupported by them) OpenBSD at the rented Celeron server (actually 2; dmesg attached just FYI) - I followed the instructions at http://dettus.net
Now after few years I'd like to upgrade to their "PowerServer L" with Opteron 1212 HE CPU http://www.strato.de/server/dedicated/power/linux/ Is anybody already using such a server, does it work with the latest OpenBSD? (Also I guess I should take amd64 there?) Thank you Alex OpenBSD 4.5-stable (GENERIC) #0: Sat May 30 21:04:23 CEST 2009 afar...@hxxxxxx.serverkompetenz.net:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel(R) Celeron(R) CPU 2.40GHz ("GenuineIntel" 686-class) 2.40 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR real mem = 536375296 (511MB) avail mem = 510361600 (486MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 02/03/04, BIOS32 rev. 0 @ 0xfb330, SMBIOS rev. 2.3 @ 0xf0800 (37 entries) bios0: vendor Award Software International, Inc. version "6.00 PG" date 02/03/2004 bios0: Supermicro P4SBR/P4SBE acpi0 at bios0: rev 0 acpi0: tables DSDT FACP acpi0: wakeup devices HUB0(S5) USB0(S3) USB1(S3) MODM(S4) UAR1(S5) UAR2(S5) PCI0(S5) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 2 (HUB0) acpicpu0 at acpi0 acpitz0 at acpi0: critical temperature 100 degC acpibtn0 at acpi0: PWRB bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1000 0xc9000/0x1000 cpu0 at mainbus0: (uniprocessor) pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 "Intel 82845 Host" rev 0x04 intelagp0 at pchb0 agp0 at intelagp0: aperture at 0xe3000000, size 0x400000 ppb0 at pci0 dev 1 function 0 "Intel 82845 AGP" rev 0x04 pci1 at ppb0 bus 1 ppb1 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x05 pci2 at ppb1 bus 2 fxp0 at pci2 dev 6 function 0 "Intel 8255x" rev 0x08, i82559: irq 11, address 00:30:48:53:3c:96 inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4 fxp1 at pci2 dev 7 function 0 "Intel 8255x" rev 0x08, i82559: irq 10, address 00:30:48:53:3c:97 inphy1 at fxp1 phy 1: i82555 10/100 PHY, rev. 4 vga1 at pci2 dev 8 function 0 "ATI Rage XL" rev 0x27 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) ichpcib0 at pci0 dev 31 function 0 "Intel 82801BA LPC" rev 0x05 pciide0 at pci0 dev 31 function 1 "Intel 82801BA IDE" rev 0x05: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility wd0 at pciide0 channel 0 drive 0: <IC35L060AVV207-0> wd0: 16-sector PIO, LBA48, 58644MB, 120103200 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 pciide0: channel 1 disabled (no drives) ichiic0 at pci0 dev 31 function 3 "Intel 82801BA SMBus" rev 0x05: irq 9 iic0 at ichiic0 spdmem0 at iic0 addr 0x50: 512MB SDRAM non-parity PC133CL3 isa0 at ichpcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo com0: console com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> spkr0 at pcppi0 lpt0 at isa0 port 0x378/4 irq 7 wbsio0 at isa0 port 0x2e/2: W83627HF rev 0x17 lm1 at wbsio0 port 0x290/8: W83627HF npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 biomask f365 netmask ff65 ttymask ffff mtrr: Pentium Pro MTRR support softraid0 at root root on wd0a swap on wd0b dump on wd0b arpresolve: unresolved and rt_expire == 0
