Hello, yes, unfortunately I am having some issues too. I think I talked too fast.
I had the same problem about having the laptop unresponsive, even without xorg.conf (no effect on ctrl+alt+Fx or ctrl+alt+back), though I still could move the mouse. But that's it, the only thing I could do was to move the mouse. We can just wait and offer to run tests, if somebody needs a test machine. Thanks in any case for the progress! 2010/4/19 Neal Hogan <nealho...@gmail.com>: > On Sun, Apr 18, 2010 at 9:03 AM, Neal Hogan <nealho...@gmail.com> wrote: >>> >>> Like sthen@ already said.. >>> >>> The ahci controller does not support suspend/resume yet so.. try >>> changing SATA mode in the bios to compability mode so that your >>> harddrive attaches through pciide instead of through ahci. >>> >>> This has the consequence that you have to edit fstab during boot when >>> the kernel cannot find sd0a but then you just do: >>> >>> # mount /dev/wd0a / >>> # cd /etc >>> # ed fstab >>> ,s/sd0/wd0/g >>> w >>> q >>> # exit >>> [ boot continues.. ] >>> >>> I tried that on my thinkpad t400 and it made suspend/resume work for me. >>> >>> /gabriel >>> >>> >> >> I'm curious what you mean by "work fine for me." I have a T400 and >> followed your suggestion. My machine suspends and resumes most of the >> time with X and the network up and running. However, once resumed, one >> of the processors is in ~100% interupt state and reboot doesn't work >> properly. It will sync disks and look as though it powers down (black >> screen) but the system's power light is still on and the machine does >> not resond to anything but a hard shutdown. Also, after one >> suspend/resume, it won't suspend again. >> >> Note, I say that it suspends/resumes most of the time because it >> panicked once. However, I haven't been able to get to panic again. >> > > First, I want to be clear that I'm not complaining about this, just > informing. I'm as excited as most to see this progress with ACPI. > > Second, as I say above, one of the processors is in 98-100% interrupt > state after the machine resumes. However, that's only while X is > running. When I leave X it drops to around 40% and returns to ~100% > when I start X again. > > Thanks! > >> dmesg after suspend/resume: >> >> OpenBSD 4.7-current (GENERIC.MP) #186: Thu Apr 15 12:02:55 MDT 2010 >> dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP >> real mem = 2070614016 (1974MB) >> avail mem = 2001784832 (1909MB) >> mainbus0 at root >> bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xe0010 (74 entries) >> bios0: vendor LENOVO version "7UET43WW (1.13 )" date 08/19/2008 >> bios0: LENOVO 7417CTO >> acpi0 at bios0: rev 2 >> acpi0: tables DSDT FACP SSDT ECDT APIC MCFG HPET SLIC BOOT ASF! SSDT >> SSDT TCPA SSDT SSDT SSDT >> acpi0: wakeup devices LID_(S3) SLPB(S3) UART(S3) IGBE(S4) EXP0(S4) >> EXP1(S4) EXP2(S4) EXP3(S4) EXP4(S4) PCI1(S4) USB0(S3) USB1(S3) >> USB2(S3) USB3(S3) USB4(S3) USB5(S3) EHC0(S3) EHC1(S3) HDEF(S4) >> acpitimer0 at acpi0: 3579545 Hz, 24 bits >> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat >> cpu0 at mainbus0: apid 0 (boot processor) >> cpu0: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz, 2394.34 MHz >> cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS > H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,S > SSE3,CX16,xTPR,PDCM,SSE4.1,NXE,LONG >> cpu0: 3MB 64b/line 8-way L2 cache >> cpu0: apic clock running at 266MHz >> cpu1 at mainbus0: apid 1 (application processor) >> cpu1: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz, 2394.00 MHz >> cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS > H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,S > SSE3,CX16,xTPR,PDCM,SSE4.1,NXE,LONG >> cpu1: 3MB 64b/line 8-way L2 cache >> ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins >> ioapic0: misconfigured as apic 2, remapped to apid 1 >> acpihpet0 at acpi0: 14318179 Hz >> acpiprt0 at acpi0: bus 0 (PCI0) >> acpiprt1 at acpi0: bus -1 (AGP_) >> acpiprt2 at acpi0: bus 2 (EXP0) >> acpiprt3 at acpi0: bus 3 (EXP1) >> acpiprt4 at acpi0: bus -1 (EXP2) >> acpiprt5 at acpi0: bus 5 (EXP3) >> acpiprt6 at acpi0: bus 13 (EXP4) >> acpiprt7 at acpi0: bus 21 (PCI1) >> acpiec0 at acpi0 >> acpicpu0 at acpi0: C3, C2, C1, PSS >> acpicpu1 at acpi0: C3, C2, C1, PSS >> acpipwrres0 at acpi0: PUBS >> acpitz0 at acpi0: critical temperature 127 degC >> acpitz1 at acpi0: critical temperature 100 degC >> acpibtn0 at acpi0: LID_ >> acpibtn1 at acpi0: SLPB >> acpibat0 at acpi0: BAT0 model "42T5225" serial 3388 type LION oem > "Panasonic" >> acpibat1 at acpi0: BAT1 not present >> acpiac0 at acpi0: AC unit online >> acpithinkpad0 at acpi0 >> acpidock0 at acpi0: GDCK not docked (0) >> cpu0: Enhanced SpeedStep 2394 MHz: speeds: 2401, 2400, 1600, 800 MHz >> pci0 at mainbus0 bus 0 >> pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07 >> vga1 at pci0 dev 2 function 0 "Intel GM45 Video" rev 0x07 >> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) >> wsdisplay0: screen 1-5 added (80x25, vt100 emulation) >> intagp0 at vga1 >> agp0 at intagp0: aperture at 0xd0000000, size 0x10000000 >> inteldrm0 at vga1: apic 1 int 16 (irq 11) >> drm0 at inteldrm0 >> "Intel GM45 Video" rev 0x07 at pci0 dev 2 function 1 not configured >> "Intel GM45 HECI" rev 0x07 at pci0 dev 3 function 0 not configured >> ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins >> ioapic0: misconfigured as apic 2, remapped to apid 1 >> acpihpet0 at acpi0: 14318179 Hz >> acpiprt0 at acpi0: bus 0 (PCI0) >> acpiprt1 at acpi0: bus -1 (AGP_) >> acpiprt2 at acpi0: bus 2 (EXP0) >> acpiprt3 at acpi0: bus 3 (EXP1) >> acpiprt4 at acpi0: bus -1 (EXP2) >> acpiprt5 at acpi0: bus 5 (EXP3) >> acpiprt6 at acpi0: bus 13 (EXP4) >> acpiprt7 at acpi0: bus 21 (PCI1) >> acpiec0 at acpi0 >> acpicpu0 at acpi0: C3, C2, C1, PSS >> acpicpu1 at acpi0: C3, C2, C1, PSS >> acpipwrres0 at acpi0: PUBS >> acpitz0 at acpi0: critical temperature 127 degC >> acpitz1 at acpi0: critical temperature 100 degC >> acpibtn0 at acpi0: LID_ >> acpibtn1 at acpi0: SLPB >> acpibat0 at acpi0: BAT0 model "42T5225" serial 3388 type LION oem > "Panasonic" >> acpibat1 at acpi0: BAT1 not present >> acpiac0 at acpi0: AC unit online >> acpithinkpad0 at acpi0 >> acpidock0 at acpi0: GDCK not docked (0) >> cpu0: Enhanced SpeedStep 2394 MHz: speeds: 2401, 2400, 1600, 800 MHz >> pci0 at mainbus0 bus 0 >> pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07 >> vga1 at pci0 dev 2 function 0 "Intel GM45 Video" rev 0x07 >> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) >> wsdisplay0: screen 1-5 added (80x25, vt100 emulation) >> intagp0 at vga1 >> agp0 at intagp0: aperture at 0xd0000000, size 0x10000000 >> inteldrm0 at vga1: apic 1 int 16 (irq 11) >> drm0 at inteldrm0 >> "Intel GM45 Video" rev 0x07 at pci0 dev 2 function 1 not configured >> "Intel GM45 HECI" rev 0x07 at pci0 dev 3 function 0 not configured >> em0 at pci0 dev 25 function 0 "Intel ICH9 IGP M AMT" rev 0x03: apic 1 >> int 20 (irq 11), address 00:1e:37:d9:cc:ed >> uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 1 >> int 20 (irq 11) >> uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 1 >> int 21 (irq 11) >> uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 1 >> int 22 (irq 11) >> ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 1 >> int 23 (irq 11) >> usb0 at ehci0: USB revision 2.0 >> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 >> azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: >> apic 1 int 17 (irq 11) >> azalia0: codecs: Conexant CX20561 >> audio0 at azalia0 >> ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: apic 1 >> int 20 (irq 11) >> pci1 at ppb0 bus 2 >> ppb1 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: apic 1 >> int 21 (irq 11) >> pci2 at ppb1 bus 3 >> ath0 at pci2 dev 0 function 0 "Atheros AR5424" rev 0x01: apic 1 int 17 (irq > 11) >> ath0: AR5424 14.2 phy 7.0 rf 0.0, WOR02W, address 00:22:69:86:96:77 >> ppb2 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x03: apic 1 >> int 23 (irq 11) >> pci3 at ppb2 bus 5 >> ppb3 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x03: apic 1 >> int 20 (irq 11) >> pci4 at ppb3 bus 13 >> uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 1 >> int 16 (irq 11) >> uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 1 >> int 17 (irq 11) >> uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 1 >> int 18 (irq 11) >> ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 1 >> int 19 (irq 11) >> usb1 at ehci1: USB revision 2.0 >> uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 >> ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93 >> pci5 at ppb4 bus 21 >> cbb0 at pci5 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0xba: apic 1 >> int 16 (irq 11) >> "Ricoh 5C832 Firewire" rev 0x04 at pci5 dev 0 function 1 not configured >> cardslot0 at cbb0 slot 0 flags 0 >> cardbus0 at cardslot0: bus 22 device 0 cacheline 0x0, lattimer 0xb0 >> pcmcia0 at cardslot0 >> pcib0 at pci0 dev 31 function 0 "Intel 82801IEM LPC" rev 0x03 >> pciide0 at pci0 dev 31 function 2 "Intel 82801I SATA" rev 0x03: DMA, >> channel 0 configured to native-PCI, channel 1 configured to native-PCI >> pciide0: using apic 1 int 16 (irq 255) for native-PCI interrupt >> wd0 at pciide0 channel 0 drive 0: <HITACHI HTS722016K9SA00> >> wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors >> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6 >> atapiscsi0 at pciide0 channel 1 drive 0 >> scsibus0 at atapiscsi0: 2 targets >> cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVDRAM GSA-U20N, HX12> ATAPI >> 5/cdrom removable >> cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 6 >> ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x03: apic >> 1 int 23 (irq 11) >> iic0 at ichiic0 >> usb2 at uhci0: USB revision 1.0 >> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 >> usb3 at uhci1: USB revision 1.0 >> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 >> usb4 at uhci2: USB revision 1.0 >> uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 >> usb5 at uhci3: USB revision 1.0 >> uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 >> usb6 at uhci4: USB revision 1.0 >> uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1 >> usb7 at uhci5: USB revision 1.0 >> uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1 >> isa0 at pcib0 >> isadma0 at isa0 >> pckbc0 at isa0 port 0x60/5 >> pckbd0 at pckbc0 (kbd slot) >> pckbc0: using irq 1 for kbd slot >> wskbd0 at pckbd0: console keyboard, using wsdisplay0 >> pms0 at pckbc0 (aux slot) >> pckbc0: using irq 12 for aux slot >> wsmouse0 at pms0 mux 0 >> pcppi0 at isa0 port 0x61 >> midi0 at pcppi0: <PC speaker> >> spkr0 at pcppi0 >> aps0 at isa0 port 0x1600/31 >> mtrr: Pentium Pro MTRR support >> vscsi0 at root >> scsibus1 at vscsi0: 256 targets >> softraid0 at root >> root on wd0a swap on wd0b dump on wd0b >> activate: mainbus0 2 >> activate: bios0 2 >> activate: acpi0 2 >> activate: acpihpet0 2 >> activate: pci0 2 >> activate: pchb0 2 >> activate: vga1 2 >> activate: intagp0 2 >> activate: inteldrm0 2 >> activate: em0 2 >> activate: uhci0 2 >> activate: uhci1 2 >> activate: uhci2 2 >> activate: ehci0 2 >> activate: azalia0 2 >> activate: ppb0 2 >> activate: pci1 2 >> activate: ppb1 2 >> activate: pci2 2 >> activate: ppb2 2 >> activate: pci3 2 >> activate: ppb3 2 >> activate: pci4 2 >> activate: uhci3 2 >> activate: uhci4 2 >> activate: uhci5 2 >> activate: ehci1 2 >> activate: ppb4 2 >> activate: pci5 2 >> activate: pciide0 2 >> activate: wd0 2 >> activate: mainbus0 3 >> activate: bios0 3 >> activate: acpi0 3 >> activate: acpihpet0 3 >> activate: pci0 3 >> activate: pchb0 3 >> activate: vga1 3 >> activate: intagp0 3 >> activate: inteldrm0 3 >> activate: em0 3 >> activate: uhci0 3 >> activate: uhci1 3 >> activate: uhci2 3 >> activate: ehci0 3 >> activate: usb0 3 >> activate: azalia0 3 >> activate: ppb0 3 >> activate: pci1 3 >> activate: ppb1 3 >> activate: pci2 3 >> activate: ppb2 3 >> activate: pci3 3 >> activate: ppb3 3 >> activate: pci4 3 >> activate: uhci3 3 >> activate: uhci4 3 >> activate: uhci5 3 >> activate: ehci1 3 >> activate: usb1 3 >> activate: ppb4 3 >> activate: pci5 3 >> activate: pciide0 3 >> activate: wd0 3
