Hello all! I have a brand new APC Smart-UPS 750 that I want to use with my OpenBSD-box.
So far I have: * Installed the nut package nut-2.2.1p0 using pkg_add * Added user _ups to the daemon group * changed group for /dev/ugen0.00 to daemon (was wheel) * Created this ups.conf file: [ups-closetmonster] driver = usbhid-ups port = /dev/ugen0.00 desc = "UPS APC Smart-UPS 750 for server closetmonster" When I try to start the usbhid-ups driver, it always fails: $ sudo usbhid-ups -DDDD -a ups-closetmonster Network UPS Tools: 0.29 USB communication driver - core 0.32 () debug level is '4' upsdrv_initups... No appropriate HID device found No matching HID UPS found Any ideas appreciated! Some details: $ dmesg | grep ugen0 ugen0 at uhub3 port 1 "American Power Conversion Smart-UPS 750 FW:651.18.I USB FW:7.4" rev 1.10/0.06 addr 2 $ usbdevs -vd Controller /dev/usb0: addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), NEC(0x1033), rev 1.00 uhub0 port 1 powered port 2 powered port 3 powered port 4 powered port 5 powered Controller /dev/usb1: addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), NEC(0x1033), rev 1.00 uhub1 port 1 powered port 2 powered port 3 powered Controller /dev/usb2: addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), NEC(0x1033), rev 1.00 uhub2 port 1 powered port 2 powered Controller /dev/usb3: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x8086), rev 1.00 uhub3 port 1 addr 2: low speed, self powered, config 1, Smart-UPS 750 FW:651.18.I USB FW:7.4(0x0002), American Power Conversion(0x051d), rev 0.06, iSerialNumber AS0950242625 ugen0 port 2 powered Controller /dev/usb4: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x8086), rev 1.00 uhub4 port 1 powered port 2 powered -- Jon
