Top-posting because I am lazy... Since those Junipers are pseudo-chassis-based with pluggable cards, I think you are dying on how the backplane is laid out and detected by OpenBSD.
In the interim, please make sure that dms@ sees the dmesg, principally for the em(4) interface. For what it's worth, I have run OpenBSD successfully on a Cisco 4240 IDS/IPS device, --J >Hello m...@. Subj: > >Trying to boot from Secondary Compact Flash ... >Using drive 0, partition 3. >Loading... >probing: pc0 com0 com1 apm pci mem[635K 1022M a20=on] >7156348+1055080 [52+363840+348188]=0x882ae8 >> OpenBSD/i386 BOOT 3.02 >entry point at 0x200120 >com0: 9600 baud >[ using 712452 bytes of bsd ELF symbol table ] >Copyright (c) 1982, 1986, 1989, 1991, 1993 > The Regents of the University of California. All rights reserved. >Copyright (c) 1995-2010 OpenBSD. All rights reserved. http://www.OpenBSD.org > >OpenBSD 4.7-current (GENERIC) #603: Mon Apr 12 16:28:26 MDT 2010 > dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC >cpu0: Intel(R) Celeron(R) CPU 2.00GHz ("GenuineIntel" 686-class) 2.01 GHz >cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36, >CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR >real mem = 1073115136 (1023MB) >avail mem = 1029746688 (982MB) >mainbus0 at root >bios0 at mainbus0: AT/286+ BIOS, date 06/20/07, BIOS32 rev. 0 @ 0xf0010, SMBIOS >rev. 2.3 @ 0xfbbf0 (71 entries) >bios0: vendor American Megatrends Inc. version "080012" date 06/20/2007 >bios0: JUNIPER NETWORKS SHASTA_MBD_865 >acpi0 at bios0: rev 0 >acpi0: tables DSDT FACP APIC OEMB8b800) at pcib_callback+0x48 >acpi0: wakeup devices P0P4(S4) MC97(S4) USB1(S4) USB2(S4) USB3(S4) USB4(S4) >EUSB(S4) GBEN(S4) SLPB(S4) >acpitimer0 at acpi0: 3579545 Hz, 24 bits >acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat0) at config_attach+0x105 >cpu0 at mainbus0: apid 0 (boot processor) >cpu0: apic clock running at 100MHzay+0x3a >ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins >acpiprt0 at acpi0: bus 0 (PCI0)678,d0203001) at isapnp_find+0x99 >acpiprt1 at acpi0: bus 1 (P0P4)d0a84770,d08a8fdc) at isapnp_match+0x83 >acpicpu0 at acpi0d1cc1900,4,1) at isascan+0xf9 >acpibtn0 at acpi0: SLPBcc1b00,d0a84db0,d1ca4080,d1ca9000) at config_scan+0xaf >acpibtn1 at acpi0: PWRBd08a8280,d0a84db0,d061f134,d07d5557) at config_attach+0x >pci0 at mainbus0 bus 0: configuration mode 1 (bios) >pchb0 at pci0 dev 0 function 0 "Intel 82865G Host" rev 0x0248 >"Intel 82865G Video" rev 0x02 at pci0 dev 2 function 0 not configuredonfig_proc >ppb0 at pci0 dev 3 function 0 "Intel 82865G CSA" rev 0x02 >pci1 at ppb0 bus 2afc0,d08a6738,d0a84e70,d0502450) at config_attach+0x105 >em0 at pci1 dev 1 function 0 "Intel PRO/1000CT (82547GI)" rev 0x00: apic 1 int >18 (irq 5) >em0: The EEPROM Checksum Is Not Valid(0,d08a6714,0,0,0) at config_attach+0xfd >em0: Unable to initialize the hardware04d01ba) at config_rootfound+0x27 >uhci0 at pci0 dev 29 function 0 "Intel 82801EB/ER USB" rev 0x02: apic 1 int 16 >(irq 5) >uhci1 at pci0 dev 29 function 1 "Intel 82801EB/ER USB" rev 0x02: apic 1 int 19 >(irq 5) >uhci2 at pci0 dev 29 function 2 "Intel 82801EB/ER USB" rev 0x02: apic 1 int 18 >(irq 5) >uhci3 at pci0 dev 29 function 3 "Intel 82801EB/ER USB" rev 0x02: apic 1 int 16 >(irq 5) >ppb1 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xc2 >pci2 at ppb1 bus 1 >fxp0 at pci2 dev 8 function 0 "Intel PRO/100 VE" rev 0x02, i82562: apic 1 int >20 (irq 5), >address ff:ff:ff:ff:ff:ff >inphy0 at fxp0 phy 1: i82562ET 10/100 PHY, rev. 0 >"Cavium NITROX Lite" rev 0x00 at pci2 dev 15 function 0 not configured >ichpcib0 at pci0 dev 31 function 0 "Intel 82801EB/ER LPC" rev 0x02 >pciide0 at pci0 dev 31 function 1 "Intel 82801EB/ER IDE" rev 0x02: DMA, >channel 0 >configured to compatibility, channel 1 configured to compatibility >pciide0: channel 0 disabled (no drives) >wd0 at pciide0 channel 1 drive 0: <> >wd0: 1-sector PIO, LBA, 967MB, 1980720 sectors >wd0(pciide0:1:0): using PIO mode 4, DMA mode 2 >ichiic0 at pci0 dev 31 function 3 "Intel 82801EB/ER SMBus" rev 0x02: apic 1 >int 17 (irq 5) >iic0 at ichiic0 >iic0: addr 0x18 0f=18 1e=18 2d=18 3c=18 4b=18 5a=18 69=18 78=f8 87=f8 96=f8 >a5=f8 b4=f3 c3=fa d2=00 e1=00 f0=18 words 00=ffff 01=ffff 02=ffff 03=ffff >04=ffff 05=ffff 06=ffff 07=ffff >adt0 at iic0 addr 0x2d: emc6d100 rev 0x6a >iic0: addr 0x2e 20=73 21=7c 22=ba 23=c7 24=be 25=24 26=1f 27=18 28=6f 29=12 >2a=a3 2b=12 2c=2f 2d=09 2e=ff 2f=ff 30=40 31=40 32=40 3e=01 3f=69 40=05 43=0d >45=ff 47=ff 49=ff 4b=ff 4d=ff 4e=81 4f=7f 50=81 51=7f 52=81 53=7f 54=ff 55=ff >56=ff 57=ff 58=ff 59=ff 5a=ff 5b=ff 5c=22 5d=02 5e=42 5f=74 60=74 61=74 62=ef >63=ff 64=40 65=40 66=40 67=3a 68=23 69=2e 6a=44 6b=38 6c=38 6e=40 70=23 71=1f >72=17 73=be 75=07 7b=40 7c=4d 7d=43 7e=6f 7f=55 words 00=00ff 01=00ff 02=00ff >03=00ff 04=00ff 05=00ff 06=00ff 07=00ff >spdmem0 at iic0 addr 0x51: 512MB DDR SDRAM non-parity PC3200CL3.0 >spdmem1 at iic0 addr 0x53: 512MB DDR SDRAM non-parity PC3200CL3.0 >usb0 at uhci0: USB revision 1.0 >uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 >usb1 at uhci1: USB revision 1.0 >uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1 >usb2 at uhci2: USB revision 1.0 >uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 >usb3 at uhci3: USB revision 1.0 >uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 >isa0 at ichpcib0 >isadma0 at isa0 >com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo >com0: console >com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo >pckbc0 at isa0 port 0x60/5 >pcppi0 at isa0 port 0x61 >midi0 at pcppi0: <PC speaker> >spkr0 at pcppi0 >npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 >Stopped at lapic_delay+0x3a: cmpl %esi,%edi >lapic_delay(fa,223,0) at lapic_delay+0x3a >isapnp_findcard(d0a84670,a79,0,7) at isapnp_findcard+0xba >isapnp_find(d0a84670,0,10,d0a84678,d0203001) at isapnp_find+0x99 >isapnp_match(d1cc1b00,d1cc1900,d0a84770,d08a8fdc) at isapnp_match+0x83 >isascan(d1cc1b00,d1cc1900,4,1) at isascan+0xf9 >config_scan(d06220f4,d1cc1b00,d0a84db0,d1ca4080,d1ca9000) at config_scan+0xaf >config_attach(d1ca4080,d08a8280,d0a84db0,d061f134,d07d5557) at config_attach+0x >fd >pcib_callback(d1ca4080,2,1f,7,d1c8b800) at pcib_callback+0x48 >config_process_deferred_children(d1c8b800,0,0,d1c8afc0,d1c89ec0) at config_proc >ess_deferred_children+0x59 >config_attach(d1c8afc0,d08a6738,d0a84e70,d0502450) at config_attach+0x105 >ddb> trace >lapic_delay(fa,223,0) at lapic_delay+0x3a >isapnp_findcard(d0a84670,a79,0,7) at isapnp_findcard+0xba >isapnp_find(d0a84670,0,10,d0a84678,d0203001) at isapnp_find+0x99 >isapnp_match(d1cc1b00,d1cc1900,d0a84770,d08a8fdc) at isapnp_match+0x83 >isascan(d1cc1b00,d1cc1900,4,1) at isascan+0xf9 >config_scan(d06220f4,d1cc1b00,d0a84db0,d1ca4080,d1ca9000) at config_scan+0xaf >config_attach(d1ca4080,d08a8280,d0a84db0,d061f134,d07d5557) at config_attach+0x >fd >pcib_callback(d1ca4080,2,1f,7,d1c8b800) at pcib_callback+0x48 >config_process_deferred_children(d1c8b800,0,0,d1c8afc0,d1c89ec0) at config_proc >ess_deferred_children+0x59 >config_attach(d1c8afc0,d08a6738,d0a84e70,d0502450) at config_attach+0x105 >mainbus_attach(0,d1c8afc0,0,dbe35000,d0a83334) at mainbus_attach+0x1f1 >config_attach(0,d08a6714,0,0,0) at config_attach+0xfd >config_rootfound(d07c37c2,0,d0a84f38,d04d01ba) at config_rootfound+0x27 >cpu_configure(d09d2060,1,3,0,2) at cpu_configure+0x29 >main(0,0,0,0,0) at main+0x3a3 >ddb> ps > PID PPID PGRP UID S FLAGS WAIT COMMAND >* 0 -1 0 0 7 0x80200 swapper >ddb> > >; Do anyone have an experience or success stories with such HW and OpenBSD? >Thx.
