Just an update: I am able to cat > /dev/ttyC0 and cat /dev/ttyC0 and send and get text both ways.
If I run /usr/klibexec/getty std.9600 /dev/ttyC0, I get nothing. the only way to get out is ^Z and then kill it. Also, getty is not running when I start up. I check ps ax and its not there. Thanks. On Fri, Mar 12, 2010 at 1:00 PM, Gabriel Read <[email protected]> wrote: > Hi everyone, > > I have an Intel D945GSEJT mini-itx motherboard > running 4.6 GENERIC.MP#89 i386. > I have been using it as a server for a while without > a monitor or keyboard and it has been > working just fine. I hooked up a monitor and > keyboard but I don't get a login prompt. If I type on > the keyboard, the letters do appear on the screen, > as do system messages, for example, when I > shutdown it displays the shutdown message. I have > tried switching virtual consoles, which works, but it > still doesn't display a login prompt. I have checked > /etc/ttys and console and ttyC0 through ttyC3 are all turned on. > Does anyone have an ideas? > > Thanks, Gabe read > > Here is my dmesg output: > > function 3 "Intel 82801GB USB" rev 0x02: apic 2 int 16 (irq 11) > ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 2 > int 23 (irq 10) > ehci0: timed out waiting for BIOS > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2 > pci5 at ppb4 bus 5 > ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled > pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x02: DMA, > channel 0 configured to compatibility, channel 1 configured to > compatibility > pciide0: channel 0 disabled (no drives) > pciide0: channel 1 disabled (no drives) > pciide1 at pci0 dev 31 function 2 "Intel 82801GBM SATA" rev 0x02: DMA, > channel 0 configured to native-PCI, channel 1 configured to native-PCI > pciide1: using apic 2 int 19 (irq 11) for native-PCI interrupt > wd0 at pciide1 channel 0 drive 0: <WDC WD3200AAKS-00YGA0> > wd0: 16-sector PIO, LBA48, 305245MB, 625142448 sectors > wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5 > ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic > 2 int 19 (irq 11) > iic0 at ichiic0 > spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM > usb1 at uhci0: USB revision 1.0 > uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb2 at uhci1: USB revision 1.0 > uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb3 at uhci2: USB revision 1.0 > uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb4 at uhci3: USB revision 1.0 > uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > isa0 at ichpcib0 > isadma0 at isa0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pcppi0 at isa0 port 0x61 > midi0 at pcppi0: <PC speaker> > spkr0 at pcppi0 > lpt0 at isa0 port 0x378/4 irq 7 > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 > mtrr: Pentium Pro MTRR support > softraid0 at root > root on wd0a swap on wd0b dump on wd0b > arp info overwritten for 192.168.1.11 by 00:11:09:ed:7b:ee on re0 > arp info overwritten for 192.168.1.11 by 00:07:e9:0f:e0:a2 on re0 > arp info overwritten for 192.168.1.11 by 00:11:09:ed:7b:ee on re0 > arp info overwritten for 192.168.1.11 by 00:11:09:ed:7b:ee on re0 > arp info overwritten for 192.168.1.11 by 00:07:e9:0f:e0:a2 on re0 > arp info overwritten for 192.168.1.11 by 00:11:09:ed:7b:ee on re0 > arp info overwritten for 192.168.1.11 by 00:07:e9:0f:e0:a2 on re0 > arp info overwritten for 192.168.1.11 by 00:11:09:ed:7b:ee on re0 > arp info overwritten for 192.168.1.11 by 00:07:e9:0f:e0:a2 on re0 > arp info overwritten for 192.168.1.127 by 00:16:cb:95:ae:fa on re0 > arp info overwritten for 192.168.1.127 by 00:16:cb:b4:65:53 on re0 > uhub5 at uhub1 port 2 "Mitsumi Electric Hub in Apple Extended USB > Keyboard" rev 1.10/1.22 addr 2 > uhidev0 at uhub5 port 1 configuration 1 interface 0 "Mitsumi Electric > Apple Extended USB Keyboard" rev 1.10/1.22 addr 3 > uhidev0: iclass 3/1 > ukbd0 at uhidev0: 8 modifier keys, 6 key codes > wskbd1 at ukbd0 mux 1 > wskbd1: connecting to wsdisplay0 > uhidev1 at uhub5 port 1 configuration 1 interface 1 "Mitsumi Electric > Apple Extended USB Keyboard" rev 1.10/1.22 addr 3 > uhidev1: iclass 3/0, 3 report ids > uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0 > uhid1 at uhidev1 reportid 3: input=3, output=0, feature=0 > syncing disks... > OpenBSD 4.6 (GENERIC.MP) #89: Thu Jul 9 21:32:39 MDT 2009 > [email protected]:/usr/src/sys/arch/i386/compile/GENERIC.MP > cpu0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz ("GenuineIntel" 686-class) 1.60 GHz > cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,A CPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,xTPR > real mem = 1061449728 (1012MB) > avail mem = 1017520128 (970MB) > mainbus0 at root > bios0 at mainbus0: AT/286+ BIOS, date 03/06/09, SMBIOS rev. 2.6 @ > 0xe91f0 (42 entries) > bios0: vendor Intel Corp. version "JT94510H.86A.0025.2009.0306.1639" > date 03/06/2009 > bios0: Intel Corporation D945GSEJT > acpi0 at bios0: rev 2 > acpi0: tables DSDT FACP APIC MCFG SSDT SSDT SSDT > acpi0: wakeup devices P0P2(S4) PEGP(S4) USB0(S3) USB1(S3) USB2(S3) > USB3(S3) EHCI(S3) MC97(S4) P0P1(S4) PS2K(S3) PS2M(S3) UAR1(S3) > UAR2(S3) P0P4(S4) P0P5(S4) P0P6(S4) PWRB(S3) > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: apic clock running at 132MHz > cpu1 at mainbus0: apid 1 (application processor) > cpu1: Intel(R) Atom(TM) CPU N270 @ 1.60GHz ("GenuineIntel" 686-class) 1.60 GHz > cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,A CPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,xTPR > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus -1 (P0P2) > acpiprt2 at acpi0: bus 5 (P0P1) > acpiprt3 at acpi0: bus 1 (P0P4) > acpiprt4 at acpi0: bus 2 (P0P5) > acpicpu0 at acpi0: C3, C2, C1, PSS > acpicpu1 at acpi0: C3, C2, C1, PSS > acpibtn0 at acpi0: PWRB > acpivideo0 at acpi0: IGD_ > acpivout0 at acpivideo0: DD01 > acpivout1 at acpivideo0: DD02 > acpivout2 at acpivideo0: DD03 > acpivout3 at acpivideo0: DD04 > bios0: ROM list: 0xc0000/0xec00! 0xcf000/0x1000 > cpu0: Enhanced SpeedStep 1597 MHz: speeds: 1600, 1333, 1067, 800 MHz > pci0 at mainbus0 bus 0: configuration mode 1 (bios) > pchb0 at pci0 dev 0 function 0 "Intel 82945GME Host" rev 0x03 > vga1 at pci0 dev 2 function 0 "Intel 82945GME Video" rev 0x03 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > intagp0 at vga1 > agp0 at intagp0: aperture at 0xd0000000, size 0x10000000 > inteldrm0 at vga1: apic 2 int 16 (irq 11) > drm0 at inteldrm0 > "Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured > azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: > apic 2 int 16 (irq 11) > azalia0: codecs: Realtek ALC662 > audio0 at azalia0 > ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02 > pci1 at ppb0 bus 1 > re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x03: RTL8168D/8111D > (0x2800), apic 2 int 16 (irq 11), address 00:1c:c0:df:45:73 > rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2 > ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02 > pci2 at ppb1 bus 2 > ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02 > pci3 at ppb2 bus 3 > ppb3 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02 > pci4 at ppb3 bus 4 > uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 2 > int 23 (irq 10) > uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 2 > int 19 (irq 11) > uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 2 > int 18 (irq 7) > uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 2 > int 16 (irq 11) > ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 2 > int 23 (irq 10) > ehci0: timed out waiting for BIOS > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2 > pci5 at ppb4 bus 5 > ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled > pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x02: DMA, > channel 0 configured to compatibility, channel 1 configured to > compatibility > pciide0: channel 0 disabled (no drives) > pciide0: channel 1 disabled (no drives) > pciide1 at pci0 dev 31 function 2 "Intel 82801GBM SATA" rev 0x02: DMA, > channel 0 configured to native-PCI, channel 1 configured to native-PCI > pciide1: using apic 2 int 19 (irq 11) for native-PCI interrupt > wd0 at pciide1 channel 0 drive 0: <WDC WD3200AAKS-00YGA0> > wd0: 16-sector PIO, LBA48, 305245MB, 625142448 sectors > wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5 > ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic > 2 int 19 (irq 11) > iic0 at ichiic0 > spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM > usb1 at uhci0: USB revision 1.0 > uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb2 at uhci1: USB revision 1.0 > uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb3 at uhci2: USB revision 1.0 > uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb4 at uhci3: USB revision 1.0 > uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > isa0 at ichpcib0 > isadma0 at isa0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pcppi0 at isa0 port 0x61 > midi0 at pcppi0: <PC speaker> > spkr0 at pcppi0 > lpt0 at isa0 port 0x378/4 irq 7 > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 > mtrr: Pentium Pro MTRR support > uhub5 at uhub1 port 2 "Mitsumi Electric Hub in Apple Extended USB > Keyboard" rev 1.10/1.22 addr 2 > uhidev0 at uhub5 port 1 configuration 1 interface 0 "Mitsumi Electric > Apple Extended USB Keyboard" rev 1.10/1.22 addr 3 > uhidev0: iclass 3/1 > ukbd0 at uhidev0: 8 modifier keys, 6 key codes > wskbd1 at ukbd0 mux 1 > wskbd1: connecting to wsdisplay0 > uhidev1 at uhub5 port 1 configuration 1 interface 1 "Mitsumi Electric > Apple Extended USB Keyboard" rev 1.10/1.22 addr 3 > uhidev1: iclass 3/0, 3 report ids > uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0 > uhid1 at uhidev1 reportid 3: input=3, output=0, feature=0 > softraid0 at root > root on wd0a swap on wd0b dump on wd0b > syncing disks... > OpenBSD 4.6 (GENERIC.MP) #89: Thu Jul 9 21:32:39 MDT 2009 > [email protected]:/usr/src/sys/arch/i386/compile/GENERIC.MP > cpu0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz ("GenuineIntel" 686-class) 1.60 GHz > cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,A CPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,xTPR > real mem = 1061449728 (1012MB) > avail mem = 1017520128 (970MB) > mainbus0 at root > bios0 at mainbus0: AT/286+ BIOS, date 03/06/09, SMBIOS rev. 2.6 @ > 0xe91f0 (42 entries) > bios0: vendor Intel Corp. version "JT94510H.86A.0025.2009.0306.1639" > date 03/06/2009 > bios0: Intel Corporation D945GSEJT > acpi0 at bios0: rev 2 > acpi0: tables DSDT FACP APIC MCFG SSDT SSDT SSDT > acpi0: wakeup devices P0P2(S4) PEGP(S4) USB0(S3) USB1(S3) USB2(S3) > USB3(S3) EHCI(S3) MC97(S4) P0P1(S4) PS2K(S3) PS2M(S3) UAR1(S3) > UAR2(S3) P0P4(S4) P0P5(S4) P0P6(S4) PWRB(S3) > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: apic clock running at 132MHz > cpu1 at mainbus0: apid 1 (application processor) > cpu1: Intel(R) Atom(TM) CPU N270 @ 1.60GHz ("GenuineIntel" 686-class) 1.60 GHz > cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,A CPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,xTPR > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus -1 (P0P2) > acpiprt2 at acpi0: bus 5 (P0P1) > acpiprt3 at acpi0: bus 1 (P0P4) > acpiprt4 at acpi0: bus 2 (P0P5) > acpicpu0 at acpi0: C3, C2, C1, PSS > acpicpu1 at acpi0: C3, C2, C1, PSS > acpibtn0 at acpi0: PWRB > acpivideo0 at acpi0: IGD_ > acpivout0 at acpivideo0: DD01 > acpivout1 at acpivideo0: DD02 > acpivout2 at acpivideo0: DD03 > acpivout3 at acpivideo0: DD04 > bios0: ROM list: 0xc0000/0xec00! 0xcf000/0x1000 > cpu0: Enhanced SpeedStep 1596 MHz: speeds: 1600, 1333, 1067, 800 MHz > pci0 at mainbus0 bus 0: configuration mode 1 (bios) > pchb0 at pci0 dev 0 function 0 "Intel 82945GME Host" rev 0x03 > vga1 at pci0 dev 2 function 0 "Intel 82945GME Video" rev 0x03 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > intagp0 at vga1 > agp0 at intagp0: aperture at 0xd0000000, size 0x10000000 > inteldrm0 at vga1: apic 2 int 16 (irq 11) > drm0 at inteldrm0 > "Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured > azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: > apic 2 int 16 (irq 11) > azalia0: codecs: Realtek ALC662 > audio0 at azalia0 > ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02 > pci1 at ppb0 bus 1 > re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x03: RTL8168D/8111D > (0x2800), apic 2 int 16 (irq 11), address 00:1c:c0:df:45:73 > rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2 > ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02 > pci2 at ppb1 bus 2 > ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02 > pci3 at ppb2 bus 3 > ppb3 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02 > pci4 at ppb3 bus 4 > uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 2 > int 23 (irq 10) > uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 2 > int 19 (irq 11) > uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 2 > int 18 (irq 7) > uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 2 > int 16 (irq 11) > ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 2 > int 23 (irq 10) > ehci0: timed out waiting for BIOS > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2 > pci5 at ppb4 bus 5 > ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled > pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x02: DMA, > channel 0 configured to compatibility, channel 1 configured to > compatibility > pciide0: channel 0 disabled (no drives) > pciide0: channel 1 disabled (no drives) > pciide1 at pci0 dev 31 function 2 "Intel 82801GBM SATA" rev 0x02: DMA, > channel 0 configured to native-PCI, channel 1 configured to native-PCI > pciide1: using apic 2 int 19 (irq 11) for native-PCI interrupt > wd0 at pciide1 channel 0 drive 0: <WDC WD3200AAKS-00YGA0> > wd0: 16-sector PIO, LBA48, 305245MB, 625142448 sectors > wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5 > ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic > 2 int 19 (irq 11) > iic0 at ichiic0 > spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM > usb1 at uhci0: USB revision 1.0 > uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb2 at uhci1: USB revision 1.0 > uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb3 at uhci2: USB revision 1.0 > uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb4 at uhci3: USB revision 1.0 > uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > isa0 at ichpcib0 > isadma0 at isa0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pcppi0 at isa0 port 0x61 > midi0 at pcppi0: <PC speaker> > spkr0 at pcppi0 > lpt0 at isa0 port 0x378/4 irq 7 > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 > mtrr: Pentium Pro MTRR support > uhub5 at uhub1 port 2 "Mitsumi Electric Hub in Apple Extended USB > Keyboard" rev 1.10/1.22 addr 2 > uhidev0 at uhub5 port 1 configuration 1 interface 0 "Mitsumi Electric > Apple Extended USB Keyboard" rev 1.10/1.22 addr 3 > uhidev0: iclass 3/1 > ukbd0 at uhidev0: 8 modifier keys, 6 key codes > wskbd1 at ukbd0 mux 1 > wskbd1: connecting to wsdisplay0 > uhidev1 at uhub5 port 1 configuration 1 interface 1 "Mitsumi Electric > Apple Extended USB Keyboard" rev 1.10/1.22 addr 3 > uhidev1: iclass 3/0, 3 report ids > uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0 > uhid1 at uhidev1 reportid 3: input=3, output=0, feature=0 > softraid0 at root > root on wd0a swap on wd0b dump on wd0b > wskbd1: disconnecting from wsdisplay0 > wskbd1 detached > ukbd0 detached > uhidev0 detached > uhid0 detached > uhid1 detached > uhidev1 detached > uhub5 detached > uhub5 at uhub1 port 2 "Mitsumi Electric Hub in Apple Extended USB > Keyboard" rev 1.10/1.22 addr 2 > uhidev0 at uhub5 port 1 configuration 1 interface 0 "Mitsumi Electric > Apple Extended USB Keyboard" rev 1.10/1.22 addr 3 > uhidev0: iclass 3/1 > ukbd0 at uhidev0: 8 modifier keys, 6 key codes > wskbd1 at ukbd0 mux 1 > wskbd1: connecting to wsdisplay0 > uhidev1 at uhub5 port 1 configuration 1 interface 1 "Mitsumi Electric > Apple Extended USB Keyboard" rev 1.10/1.22 addr 3 > uhidev1: iclass 3/0, 3 report ids > uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0 > uhid1 at uhidev1 reportid 3: input=3, output=0, feature=0
