Hi,
I am multibooting 4.6/amd64 with archlinux.
I am able to get internet connection using pppoe in archlinux so I
guess it is not a problem with username or password.
My Connection in OpenBSD shows as below.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 33152
priority: 0
groups: lo
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
vr0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:11:d8:01:23:45
priority: 0
media: Ethernet autoselect (100baseTX full-duplex)
status: active
inet6 fe80::211:d8ff:fe01:2345%vr0 prefixlen 64 scopeid 0x1
enc0: flags=0<> mtu 1536
priority: 0
pppoe0: flags=8851<UP,POINTOPOINT,RUNNING,SIMPLEX,MULTICAST> mtu 1492
priority: 0
dev: vr0 state: session
sid: 0x211 PADI retries: 0 PADR retries: 0 time: 00:00:05
sppp: phase terminate authproto pap authname "username"
groups: pppoe egress
inet6 fe80::211:d8ff:fe01:2345%pppoe0 -> prefixlen 64 scopeid 0x4
inet 0.0.0.0 --> 0.0.0.1 netmask 0xffffffff
pflog0: flags=141<UP,RUNNING,PROMISC> mtu 33152
priority: 0
groups: pflog
where do I look to see why the phase was terminated as stated in
sppp: phase terminate authproto pap authname "username"
can get any info from /var/log/messages
And also the system drops into the ddb prompt during boot if I leave
the authkey field NULL ( '' ). Is that a bug or feature?
thanks
--Siju
My Configuration is as follows.
# cat /etc/hostname.pppoe0
inet 0.0.0.0 255.255.255.255 NONE \
pppoedev vr0 authproto pap \
authname 'username' authkey 'passwd' up
dest 0.0.0.1
!/sbin/route add default -ifp pppoe0 0.0.0.1
#cat /etc/hostname.vr0
up
the dmesg
OpenBSD 4.6 (GENERIC) #53: Thu Jul 9 21:19:22 MDT 2009
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 468385792 (446MB)
avail mem = 441716736 (421MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.3 @ 0xf0730 (54 entries)
bios0: vendor American Megatrends Inc. version "080012" date 06/19/2006
bios0: ASUSTeK Computer INC. A8V-VM
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP APIC MCFG OEMB
acpi0: wakeup devices PCI0(S4) PS2K(S4) PS2M(S4) UAR2(S4) USB1(S4)
USB2(S4) USB3(S4) USB4(S4) ILAN(S4) PCI1(S4) PCI2(S4) SLPB(S4)
PWRB(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Athlon(tm) 64 Processor 3500+, 2200.50 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB
64b/line 16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: AMD erratum 89 present, BIOS upgrade may be required
cpu0: apic clock running at 200MHz
ioapic0 at mainbus0 apid 1 pa 0xfec00000, version 3, 24 pins
ioapic1 at mainbus0 apid 2 pa 0xfecc0000, version 3, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (P0P1)
acpiprt2 at acpi0: bus -1 (NBPG)
acpiprt3 at acpi0: bus -1 (NBP0)
acpiprt4 at acpi0: bus 4 (P0P7)
acpiprt5 at acpi0: bus 5 (P0PA)
acpicpu0 at acpi0: C3, C2
acpibtn0 at acpi0: SLPB
acpibtn1 at acpi0: PWRB
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "VIA K8M890 Host" rev 0x00
agp at pchb0 not configured
pchb1 at pci0 dev 0 function 1 "VIA K8M890 Host" rev 0x00
pchb2 at pci0 dev 0 function 2 "VIA K8M890 Host" rev 0x00
pchb3 at pci0 dev 0 function 3 "VIA K8M890 Host" rev 0x00
pchb4 at pci0 dev 0 function 4 "VIA K8M890 Host" rev 0x00
"VIA K8M890 IOAPIC" rev 0x00 at pci0 dev 0 function 5 not configured
pchb5 at pci0 dev 0 function 6 "VIA K8M890 Host" rev 0x00
pchb6 at pci0 dev 0 function 7 "VIA K8M890 Host" rev 0x00
ppb0 at pci0 dev 1 function 0 "VIA K8HTB AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "VIA DeltaChrome Video" rev 0x01
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pciide0 at pci0 dev 15 function 0 "VIA VT8251 SATA" rev 0x00: DMA
pciide0: using apic 1 int 21 (irq 5) for native-PCI interrupt
pciide1 at pci0 dev 15 function 1 "VIA VT82C571 IDE" rev 0x07: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
wd0 at pciide1 channel 0 drive 0: <ST340014A>
wd0: 16-sector PIO, LBA48, 38166MB, 78165360 sectors
wd0(pciide1:0:0): using PIO mode 4, DMA mode 2
atapiscsi0 at pciide1 channel 1 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <Optiarc, DVD RW AD-7190A, 1.02> ATAPI
5/cdrom removable
cd0(pciide1:1:1): using PIO mode 4, DMA mode 2
uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x90: apic 1
int 20 (irq 11)
uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x90: apic 1
int 22 (irq 4)
uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x90: apic 1
int 21 (irq 5)
uhci3 at pci0 dev 16 function 3 "VIA VT83C572 USB" rev 0x90: apic 1
int 23 (irq 5)
ehci0 at pci0 dev 16 function 4 "VIA VT6202 USB" rev 0x90: apic 1 int 22 (irq 4)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "VIA EHCI root hub" rev 2.00/1.00 addr 1
viapm0 at pci0 dev 17 function 0 "VIA VT8251 ISA" rev 0x00
iic0 at viapm0
spdmem0 at iic0 addr 0x51: 512MB DDR SDRAM non-parity PC3200CL3.0
pchb7 at pci0 dev 17 function 7 "VIA VT8251 VLINK" rev 0x00
vr0 at pci0 dev 18 function 0 "VIA RhineII-2" rev 0x7c: apic 1 int 23
(irq 11), address 00:11:d8:01:23:45
rlphy0 at vr0 phy 1: RTL8201L 10/100 PHY, rev. 1
ppb1 at pci0 dev 19 function 0 "VIA VT8251 PCIE" rev 0x00
pci2 at ppb1 bus 4
azalia0 at pci2 dev 1 function 0 "VIA HD Audio" rev 0x00: apic 1 int 17 (irq 5)
azalia0: codecs: Analog Devices/0x1986
audio0 at azalia0
ppb2 at pci0 dev 19 function 1 "VIA VT8251 PCI" rev 0x00
pci3 at ppb2 bus 5
eap0 at pci3 dev 8 function 0 "Creative Labs Ectiva 1938" rev 0x00:
apic 1 int 16 (irq 11)
ac97: codec id 0x00008384
ac97: codec features mic channel, tone, 20 bit ADC, Unknown 3D
audio1 at eap0
midi0 at eap0: <AudioPCI MIDI UART>
pchb8 at pci0 dev 24 function 0 "AMD AMD64 0Fh HyperTransport" rev 0x00
pchb9 at pci0 dev 24 function 1 "AMD AMD64 0Fh Address Map" rev 0x00
pchb10 at pci0 dev 24 function 2 "AMD AMD64 0Fh DRAM Cfg" rev 0x00
kate0 at pci0 dev 24 function 3 "AMD AMD64 0Fh Misc Cfg" rev 0x00
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "VIA UHCI root hub" rev 1.00/1.00 addr 1
isa0 at mainbus0
isadma0 at isa0
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi1 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
wbsio0 at isa0 port 0x2e/2: W83627EHF rev 0x63
lm1 at wbsio0 port 0x290/8: W83627EHF
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
mtrr: Pentium Pro MTRR support
ugen0 at uhub1 port 1 "Logitech product 0x08af" rev 1.10/1.00 addr 2
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
