On Mon, Mar 01, 2010 at 03:56:22PM +0100, Pete Vickers wrote: > Hei, > > > Upon booting either 4.6-RELEASE or 4.7-BETA on my SunFire 880 causes the > kernel it to 'see' twice the correct number of physical disk. Further if I > install the o/s using bsd.rd on to sd0, then upon reboot the kernel can't > find the root disk. However if I install on sd12 then booting etc is fine. > > the machine has physically 12 disks (36GB FC-AL), which appear to be > duplicated as sd0-sd11 and sd12-23.
Do you have the disk in a loop that includes both ports on the 2200? That could explain why the disks are seen twice. And I believe only one WWN is saved from the boot so if it sees the same disk on the other port it may be lost. .... Ken > > > r...@sf880 ~>sysctl hw.disknames > hw.disknames=cd0,sd0,sd1,sd2,sd3,sd4,sd5,sd6,sd7,sd8,sd9,sd10,sd11,sd12,sd13, > sd14,sd15,sd16,sd17,sd18,sd19,sd20,sd21,sd22,sd23 > > > > compare disk serial numbers : > > r...@sf880 ~>bioctl sd0 > sd0: <SEAGATE, ST336605FSUN36G, 0438>, serial 3FP0N1K600007214DE8J > r...@sf880 ~>bioctl sd1 > sd1: <SEAGATE, ST336605FSUN36G, 0438>, serial 3FP0JHHX00007214DDNK > > r...@sf880 ~>bioctl sd12 > sd12: <SEAGATE, ST336605FSUN36G, 0438>, serial 3FP0N1K600007214DE8J > r...@sf880 ~>bioctl sd13 > sd13: <SEAGATE, ST336605FSUN36G, 0438>, serial 3FP0JHHX00007214DDNK > > > > > > full dmesg: > > > console is /p...@9,700000/e...@1/ser...@1,400000:a > Copyright (c) 1982, 1986, 1989, 1991, 1993 > The Regents of the University of California. All rights reserved. > Copyright (c) 1995-2009 OpenBSD. All rights reserved. http://www.OpenBSD.org > > OpenBSD 4.6 (GENERIC.MP) #53: Thu Jul 9 21:50:16 MDT 2009 > dera...@sparc64.openbsd.org:/usr/src/sys/arch/sparc64/compile/GENERIC.MP > real mem = 4294967296 (4096MB) > avail mem = 4140875776 (3949MB) > mainbus0 at root: Sun Fire 880 > cpu0 at mainbus0: SUNW,UltraSPARC-III (rev 5.4) @ 750 MHz > cpu0: physical 32K instruction (32 b/l), 64K data (32 b/l), 8192K external > (512 b/l) > cpu1 at mainbus0: SUNW,UltraSPARC-III (rev 5.4) @ 750 MHz > cpu1: physical 32K instruction (32 b/l), 64K data (32 b/l), 8192K external > (512 b/l) > "memory-controller" at mainbus0 not configured > "memory-controller" at mainbus0 not configured > schizo0 at mainbus0: "Schizo", version 4, ign 200, bus B 0 to 1 > schizo0: dvma map c0000000-ffffffff > pci0 at schizo0 > siop0 at pci0 dev 1 function 0 "Symbios Logic 53c875" rev 0x04: ivec 0x21c, > using 4K of on-board RAM > scsibus0 at siop0: 16 targets, initiator 7 > cd0 at scsibus0 targ 6 lun 0: <TOSHIBA, DVD-ROM SD-M1401, 1009> SCSI2 5/cdrom > removable > ppb0 at pci0 dev 5 function 0 "DEC 21154 PCI-PCI" rev 0x05 > pci1 at ppb0 bus 1 > isp0 at pci1 dev 4 function 0 "QLogic ISP2200" rev 0x05: ivec 0x218 > isp0: Board Type 2200, Chip Revision 0x5, loaded F/W Revision 2.2.6 > scsibus1 at isp0: 512 targets > sd0 at scsibus1 targ 0 lun 0: <SEAGATE, ST336605FSUN36G, 0438> SCSI3 0/direct > fixed > sd0: 34732MB, 512 bytes/sec, 71132959 sec total > sd1 at scsibus1 targ 1 lun 0: <SEAGATE, ST336605FSUN36G, 0438> SCSI3 0/direct > fixed > sd1: 34732MB, 512 bytes/sec, 71132959 sec total > sd2 at scsibus1 targ 2 lun 0: <SEAGATE, ST336605FSUN36G, 0438> SCSI3 0/direct > fixed > sd2: 34732MB, 512 bytes/sec, 71132959 sec total > sd3 at scsibus1 targ 3 lun 0: <SEAGATE, ST336605FSUN36G, 0438> SCSI3 0/direct > fixed > sd3: 34732MB, 512 bytes/sec, 71132959 sec total > sd4 at scsibus1 targ 4 lun 0: <SEAGATE, ST336605FSUN36G, 0438> SCSI3 0/direct > fixed > sd4: 34732MB, 512 bytes/sec, 71132959 sec total > sd5 at scsibus1 targ 5 lun 0: <SEAGATE, ST336605FSUN36G, 0438> SCSI3 0/direct > fixed > sd5: 34732MB, 512 bytes/sec, 71132959 sec total > ses0 at scsibus1 targ 6 lun 0: <SUNW, SUNWGS INT FCBPL, 9222> SCSI3 > 13/enclosure services fixed > sd6 at scsibus1 targ 7 lun 0: <SEAGATE, ST336605FSUN36G, 0438> SCSI3 0/direct > fixed > sd6: 34732MB, 512 bytes/sec, 71132959 sec total > sd7 at scsibus1 targ 8 lun 0: <SEAGATE, ST336605FSUN36G, 0438> SCSI3 0/direct > fixed > sd7: 34732MB, 512 bytes/sec, 71132959 sec total > sd8 at scsibus1 targ 9 lun 0: <SEAGATE, ST336605FSUN36G, 0438> SCSI3 0/direct > fixed > sd8: 34732MB, 512 bytes/sec, 71132959 sec total > sd9 at scsibus1 targ 10 lun 0: <SEAGATE, ST336605FSUN36G, 0438> SCSI3 0/direct > fixed > sd9: 34732MB, 512 bytes/sec, 71132959 sec total > sd10 at scsibus1 targ 11 lun 0: <SEAGATE, ST336605FSUN36G, 0438> SCSI3 > 0/direct fixed > sd10: 34732MB, 512 bytes/sec, 71132959 sec total > sd11 at scsibus1 targ 12 lun 0: <SEAGATE, ST336605FSUN36G, 0438> SCSI3 > 0/direct fixed > sd11: 34732MB, 512 bytes/sec, 71132959 sec total > isp1 at pci1 dev 5 function 0 "QLogic ISP2200" rev 0x05: ivec 0x219 > isp1: Board Type 2200, Chip Revision 0x5, loaded F/W Revision 2.2.6 > scsibus2 at isp1: 512 targets > schizo1 at mainbus0: "Schizo", version 4, ign 200, bus A 0 to 0 > schizo1: dvma map c0000000-ffffffff > pci2 at schizo1 > gem0 at pci2 dev 1 function 0 "Sun GEM" rev 0x01: ivec 0x200, address > 00:03:ba:08:de:01 > gentbi0 at gem0 phy 0: Generic ten-bit interface, rev. 0 > isp2 at pci2 dev 2 function 0 "QLogic ISP2200" rev 0x05: ivec 0x204 > isp2: Board Type 2200, Chip Revision 0x5, loaded F/W Revision 2.2.6 > scsibus3 at isp2: 512 targets > sd12 at scsibus3 targ 0 lun 0: <SEAGATE, ST336605FSUN36G, 0438> SCSI3 0/direct > fixed > sd12: 34732MB, 512 bytes/sec, 71132959 sec total > sd13 at scsibus3 targ 1 lun 0: <SEAGATE, ST336605FSUN36G, 0438> SCSI3 0/direct > fixed > sd13: 34732MB, 512 bytes/sec, 71132959 sec total > sd14 at scsibus3 targ 2 lun 0: <SEAGATE, ST336605FSUN36G, 0438> SCSI3 0/direct > fixed > sd14: 34732MB, 512 bytes/sec, 71132959 sec total > sd15 at scsibus3 targ 3 lun 0: <SEAGATE, ST336605FSUN36G, 0438> SCSI3 0/direct > fixed > sd15: 34732MB, 512 bytes/sec, 71132959 sec total > sd16 at scsibus3 targ 4 lun 0: <SEAGATE, ST336605FSUN36G, 0438> SCSI3 0/direct > fixed > sd16: 34732MB, 512 bytes/sec, 71132959 sec total > sd17 at scsibus3 targ 5 lun 0: <SEAGATE, ST336605FSUN36G, 0438> SCSI3 0/direct > fixed > sd17: 34732MB, 512 bytes/sec, 71132959 sec total > ses1 at scsibus3 targ 6 lun 0: <SUNW, SUNWGS INT FCBPL, 9222> SCSI3 > 13/enclosure services fixed > sd18 at scsibus3 targ 7 lun 0: <SEAGATE, ST336605FSUN36G, 0438> SCSI3 0/direct > fixed > sd18: 34732MB, 512 bytes/sec, 71132959 sec total > sd19 at scsibus3 targ 8 lun 0: <SEAGATE, ST336605FSUN36G, 0438> SCSI3 0/direct > fixed > sd19: 34732MB, 512 bytes/sec, 71132959 sec total > sd20 at scsibus3 targ 9 lun 0: <SEAGATE, ST336605FSUN36G, 0438> SCSI3 0/direct > fixed > sd20: 34732MB, 512 bytes/sec, 71132959 sec total > sd21 at scsibus3 targ 10 lun 0: <SEAGATE, ST336605FSUN36G, 0438> SCSI3 > 0/direct fixed > sd21: 34732MB, 512 bytes/sec, 71132959 sec total > sd22 at scsibus3 targ 11 lun 0: <SEAGATE, ST336605FSUN36G, 0438> SCSI3 > 0/direct fixed > sd22: 34732MB, 512 bytes/sec, 71132959 sec total > sd23 at scsibus3 targ 12 lun 0: <SEAGATE, ST336605FSUN36G, 0438> SCSI3 > 0/direct fixed > sd23: 34732MB, 512 bytes/sec, 71132959 sec total > schizo2 at mainbus0: "Schizo", version 4, ign 240, bus B 0 to 0 > schizo2: dvma map c0000000-ffffffff > pci3 at schizo2 > ebus0 at pci3 dev 1 function 0 "Sun RIO EBus" rev 0x01 > "flashprom" at ebus0 addr 0-1fffff not configured > bbc0 at ebus0 addr 0-fffff: AID 0x00 > power0 at ebus0 addr 30002e-30002f, 300600-300607 > pcfiic0 at ebus0 addr 2e-2f, 2d-2d ivec 0x23 > iic0 at pcfiic0 > admtemp0 at iic0 addr 0x218: max1617 > admtemp1 at iic0 addr 0x219: max1617 > admtemp2 at iic0 addr 0x21a: max1617 > admtemp3 at iic0 addr 0x229: max1617 > admtemp4 at iic0 addr 0x22a: max1617 > admtemp5 at iic0 addr 0x22b: max1617 > admtemp6 at iic0 addr 0x24c: max1617 > pcfiic1 at ebus0 addr 30-31 ivec 0x23 > iic1 at pcfiic1 > "ssc100" at iic1 addr 0xb not configured > "smbus-ara" at iic1 addr 0xc not configured > "ssc100" at iic1 addr 0xd not configured > "ssc100" at iic1 addr 0xe not configured > "ssc100" at iic1 addr 0xf not configured > admtemp7 at iic1 addr 0x18: max1617 > admtemp8 at iic1 addr 0x1a: max1617 > "pcf8574" at iic1 addr 0x23 not configured > "x9241" at iic1 addr 0x2c not configured > "ltc1427" at iic1 addr 0x2d not configured > "x9241" at iic1 addr 0x2e not configured > "ltc1427" at iic1 addr 0x2f not configured > "pcf8574" at iic1 addr 0x38 not configured > "pcf8574" at iic1 addr 0x39 not configured > "pcf8574" at iic1 addr 0x3a not configured > "ssc050" at iic1 addr 0x40 not configured > "ssc050" at iic1 addr 0x41 not configured > "ssc050" at iic1 addr 0x44 not configured > "ssc050" at iic1 addr 0x45 not configured > "ssc050" at iic1 addr 0x46 not configured > "ssc050" at iic1 addr 0x47 not configured > "pcf8591" at iic1 addr 0x48 not configured > "pcf8591" at iic1 addr 0x49 not configured > "pcf8591" at iic1 addr 0x4a not configured > "pcf8591" at iic1 addr 0x4b not configured > lmtemp0 at iic1 addr 0x4e: lm75 > lmtemp1 at iic1 addr 0x4f: lm75 > "ds1307" at iic1 addr 0x68 not configured > "hpc3130" at iic1 addr 0x71 not configured > "hpc3130" at iic1 addr 0x73 not configured > "hpc3130" at iic1 addr 0x74 not configured > "hpc3130" at iic1 addr 0x76 not configured > bbc1 at ebus0 addr 500000-5fffff: AID 0x04 > pcfiic2 at ebus0 addr 50002e-50002f, 50002d-50002d ivec 0x28 > iic2 at pcfiic2 > admtemp9 at iic2 addr 0x229: max1617 > admtemp10 at iic2 addr 0x22a: max1617 > admtemp11 at iic2 addr 0x22b: max1617 > pcfiic3 at ebus0 addr 500030-500031 ivec 0x28 > iic3 at pcfiic3 > rtc0 at ebus0 addr 300070-300071 ivec 0x24: ds1287 > "gpio" at ebus0 addr 300600-300607 not configured > pmc0 at ebus0 addr 300700-300701 > "rsc-control" at ebus0 addr 3062f8-3062ff ivec 0x2e not configured > com0 at ebus0 addr 3083f8-3083ff ivec 0x2d: ns16550a, 16 byte fifo > sab0 at ebus0 addr 400000-40007f ivec 0x22: rev 3.2 > sabtty0 at sab0 port 0: console > sabtty1 at sab0 port 1 > gem1 at pci3 dev 1 function 1 "Sun ERI Ether" rev 0x01: ivec 0x25d, address > 00:03:ba:08:de:00 > luphy0 at gem1 phy 1: LU6612 10/100 PHY, rev. 1 > ohci0 at pci3 dev 1 function 3 "Sun USB" rev 0x01: ivec 0x25f, version 1.0, > legacy support > usb0 at ohci0: USB revision 1.0 > uhub0 at usb0 "Sun OHCI root hub" rev 1.00/1.00 addr 1 > schizo3 at mainbus0: "Schizo", version 4, ign 240, bus A 0 to 0 > schizo3: dvma map c0000000-ffffffff > pci4 at schizo3 > softraid0 at root > bootpath: /p...@8,600000/SUNW,q...@2,0/f...@0,0/d...@21000004cf27d31b,0 > root on sd12a swap on sd12b dump on sd12b
