Hi!
It may be that i have something not set right in bios (although it has
default settings set and firmware is updated) but my hp dl385 g1
randomly stops running 20. january current amd64. The same computer
worked for a long time with another operating system, i.e. i dont
suspect hardware problem.
I wrote up these messages from console
kernel: machine: machine check trap, code=0
Stopped at hardclock+0x1: movq, %rsp,%rbp
ddb> trace
hardclock() at hardclock+0x1
Xresume_lapic_ltimer() at Xresume_lapic_ltimer+0x1e
---interrupt---
Bad frame pointer: 0xffff8000211b5f10
end trace frame: 0xffff8000211b5f10, count: -2
cpu_idle_cycle+0x13:
ddb> show panic
the kernel did not panic
ddb> ps
PID PPID PGRP UID S FLAGS WAIT COMMAND
20513 18063 20513 0 3 0x4082 netio ftp
...
ddb> show registers
ds 0xf500 acpi_pdirpa+0xb120
es 0xb800 acpi_pdirpa+0x7420
fs 0x5013 acpi_pdirpa+0xc33
gs 0x5dc8 acpi_pdirpa+0x19e8
rdi 0xffff8000211b5e08
rsi 0xffffffff80968360 cpu_info_primary
rbp 0xffff8000211brdf8
rbx 0
rdx 0xffffffff80c898c0 sched_idle_cpus
rcx 0
rax 0
r8 0
r9 0
r10 0xffff8000211b5eb0
r11 0x8
r12 0
r13 0xfffffe80075c3238
r14 9xffffffff80967360
r15 0
rip 0xffffffff802834c1 hardclock+0x1
cs 0x8
rflags 0x246
rsp 0xffff8000211b5de8
ss 0x10
hardclock+0x1 movq %rsp,%rbp
Hardware is
# sysctl hw
hw.machine=amd64
hw.model=AMD Opteron(tm) Processor 280
hw.ncpu=1
hw.byteorder=1234
hw.pagesize=4096
hw.disknames=cd0,sd0
hw.diskcount=2
hw.sensors.ciss0.drive0=online (sd0), OK
hw.sensors.kate0.temp0=49.00 degC
hw.sensors.kate0.temp2=48.00 degC
hw.sensors.kate1.temp0=46.00 degC
hw.sensors.kate1.temp2=45.00 degC
hw.cpuspeed=2405
hw.setperf=100
hw.vendor=HP
hw.product=ProLiant DL385 G1
hw.serialno=700445802
hw.uuid=37303034-3435-3730-3034-343538303200
hw.physmem=4117725184
hw.usermem=4117712896
hw.ncpufound=4
and dmesg is
OpenBSD 4.6-current (GENERIC) #59: Wed Jan 20 06:45:07 MST 2010
t...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 4117725184 (3926MB)
avail mem = 4002447360 (3817MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.3 @ 0xec000 (64 entries)
bios0: vendor HP version "A05" date 03/01/2006
bios0: HP ProLiant DL385 G1
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP APIC SPCR SRAT
acpi0: wakeup devices
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Opteron(tm) Processor 280, 2405.79 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB
64b/line 16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: AMD erratum 89 present, BIOS upgrade may be required
cpu0: apic clock running at 200MHz
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 11, 24 pins
ioapic1 at mainbus0: apid 5 pa 0xfec10000, version 11, 4 pins
ioapic2 at mainbus0: apid 6 pa 0xfec20000, version 11, 4 pins
ioapic3 at mainbus0: apid 7 pa 0xfdc00000, version 11, 4 pins
ioapic4 at mainbus0: apid 8 pa 0xfdc10000, version 11, 4 pins
acpiprt0 at acpi0: bus 1 (PCI0)
acpiprt1 at acpi0: bus 2 (PCI1)
acpiprt2 at acpi0: bus 3 (PCI2)
acpiprt3 at acpi0: bus 0 (CFG0)
acpiprt4 at acpi0: bus 5 (PCI3)
acpiprt5 at acpi0: bus 6 (PCI4)
acpicpu0 at acpi0: PSS
cpu0: Cool'n'Quiet K8 2405 MHz: speeds: 2400 2200 2000 1800 MHz
pci0 at mainbus0 bus 0
ppb0 at pci0 dev 3 function 0 "AMD 8111 PCI-PCI" rev 0x07
pci1 at ppb0 bus 1
ohci0 at pci1 dev 0 function 0 "AMD 8111 USB" rev 0x0b: apic 4 int 19
(irq 5), version 1.0, legacy support
ohci1 at pci1 dev 0 function 1 "AMD 8111 USB" rev 0x0b: apic 4 int 19
(irq 5), version 1.0, legacy support
"Compaq iLO" rev 0x01 at pci1 dev 2 function 0 not configured
"Compaq iLO" rev 0x01 at pci1 dev 2 function 2 not configured
vga1 at pci1 dev 3 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
usb0 at ohci0: USB revision 1.0
uhub0 at usb0 "AMD OHCI root hub" rev 1.00/1.00 addr 1
usb1 at ohci1: USB revision 1.0
uhub1 at usb1 "AMD OHCI root hub" rev 1.00/1.00 addr 1
amdpcib0 at pci0 dev 4 function 0 "AMD 8111 LPC" rev 0x05
pciide0 at pci0 dev 4 function 1 "AMD 8111 IDE" rev 0x03: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <Optiarc, DVD RW AD-7561A, GH53> ATAPI
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
amdpm0 at pci0 dev 4 function 3 "AMD 8111 Power" rev 0x05
ppb1 at pci0 dev 7 function 0 "AMD 8131 PCIX" rev 0x12
pci2 at ppb1 bus 2
ciss0 at pci2 dev 4 function 0 "Compaq Smart Array 64xx" rev 0x01: apic
5 int 0 (irq 7)
ciss0: 1 LD, HW rev 1, FW 2.84/2.84, 64bit fifo
scsibus1 at ciss0: 1 targets
sd0 at scsibus1 targ 0 lun 0: <HP, LOGICAL VOLUME, 2.84> SCSI2 0/direct
fixed
sd0: 140006MB, 512 bytes/sec, 286734240 sec total
aapic0 at pci0 dev 7 function 1 "AMD 8131 PCIX IOAPIC" rev 0x01
ppb2 at pci0 dev 8 function 0 "AMD 8131 PCIX" rev 0x12
pci3 at ppb2 bus 3
bge0 at pci3 dev 6 function 0 "Broadcom BCM5704C" rev 0x10, BCM5704 B0
(0x2100): apic 6 int 0 (irq 7), address 00:17:a4:aa:8e:1c
brgphy0 at bge0 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
bge1 at pci3 dev 6 function 1 "Broadcom BCM5704C" rev 0x10, BCM5704 B0
(0x2100): apic 6 int 1 (irq 10), address 00:17:a4:aa:8e:1b
brgphy1 at bge1 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
aapic1 at pci0 dev 8 function 1 "AMD 8131 PCIX IOAPIC" rev 0x01
pchb0 at pci0 dev 24 function 0 "AMD AMD64 0Fh HyperTransport" rev 0x00
pci4 at pchb0 bus 4
ppb3 at pci4 dev 9 function 0 "AMD 8131 PCIX" rev 0x12
pci5 at ppb3 bus 5
aapic2 at pci4 dev 9 function 1 "AMD 8131 PCIX IOAPIC" rev 0x01
ppb4 at pci4 dev 10 function 0 "AMD 8131 PCIX" rev 0x12
pci6 at ppb4 bus 6
aapic3 at pci4 dev 10 function 1 "AMD 8131 PCIX IOAPIC" rev 0x01
pchb1 at pci0 dev 24 function 1 "AMD AMD64 0Fh Address Map" rev 0x00
pchb2 at pci0 dev 24 function 2 "AMD AMD64 0Fh DRAM Cfg" rev 0x00
kate0 at pci0 dev 24 function 3 "AMD AMD64 0Fh Misc Cfg" rev 0x00
pchb3 at pci0 dev 25 function 0 "AMD AMD64 0Fh HyperTransport" rev 0x00
pchb4 at pci0 dev 25 function 1 "AMD AMD64 0Fh Address Map" rev 0x00
pchb5 at pci0 dev 25 function 2 "AMD AMD64 0Fh DRAM Cfg" rev 0x00
kate1 at pci0 dev 25 function 3 "AMD AMD64 0Fh Misc Cfg" rev 0x00
isa0 at amdpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
com1: probed fifo depth: 0 bytes
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
mtrr: Pentium Pro MTRR support
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
root on sd0d swap on sd0b dump on sd0b
WARNING: / was not properly unmounted
On this occasion i could copy several MB files over network and then it
stopped.
It would be great if somebody could suggest how to get OpenBSD on this
computer working or confirm that i'd rather find me another computer.
Best regards,
Imre
PS Actually, in the first place i tried to run amd64 4.6 stable on this
computer but it behaved similarily and then i did give a try with current.
