I provided one for this panic, got the same laptop at work ;-)
Gilles
On Fri, Jan 22, 2010 at 07:26:56AM -0600, Marco Peereboom wrote:
> you too need to send acpidump -o output in a tar to jordan.
>
> On Fri, Jan 22, 2010 at 02:04:23PM +0100, Jan Stary wrote:
> > This is a fresh -current on an HP EliteBook 8530w ("Mobile Workstation").
> > Thank you all who make be able to run this.
> >
> > /bsd panics when booting when ACPI is enabled; boots and works just fine
> > once ACPI is disabled (via UKC). See full dmesgs below.
> >
> > What puzzles me is that /bsd.rd (who does the install) has ACPI enabled,
> > yet runs fine - unlike the /bsd that in installs (see the full dmesg
> > of bsd.rd below, too):
> >
> > acpi0 at bios0: rev 2
> > acpi0: tables DSDT FACP HPET APIC MCFG TCPA SSDT SLIC SSDT DMAR ASF! SSDT
> > SSDT SSDT
> > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> > cpu0 at mainbus0: apid 0 (boot processor)
> > cpu0: apic clock running at 265MHz
> > cpu at mainbus0: not configured
> > ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
> > ioapic0: misconfigured as apic 0, remapped to apid 1
> > acpiprt0 at acpi0: bus 1 (PEGP)
> > acpiprt1 at acpi0: bus 2 (RP01)
> > acpiprt2 at acpi0: bus 3 (RP02)
> > acpiprt3 at acpi0: bus 4 (RP03)
> > acpiprt4 at acpi0: bus 69 (RP05)
> > acpiprt5 at acpi0: bus 134 (PCIB)
> > acpiprt6 at acpi0: bus 0 (PCI0)
> >
> > Looking at the differing ACPI and cpu lines in the dmesgs
> > of /bsd and /bsd.rd, I see that /bsd has more ACPI parts
> > (lines missing from a full diff, obviously):
> >
> > -OpenBSD 4.6-current (RAMDISK_CD) #307: Wed Jan 20 07:01:26 MST 2010
> > - t...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/RAMDISK_CD
> > +OpenBSD 4.6-current (GENERIC.MP) #393: Wed Jan 20 06:54:30 MST 2010
> > + t...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
> >
> > +acpi0: wakeup devices LANC(S5) HDEF(S4) RP02(S5) WNIC(S5) RP03(S5)
> > ECF0(S5) RP05(S5) ECF0(S5) RP06(S5) NIC_(S5) USB1(S3) USB2(S3) USB3(S3)
> > USB4(S3) USB5(S3) USB6(S3) U6RM(S3) EHC1(S3) EHC2(S3) PCIB(S5) HST1(S5)
> > +acpitimer0 at acpi0: 3579545 Hz, 24 bits
> > +acpihpet0 at acpi0: 14318179 Hz
> >
> > -cpu0: apic clock running at 265MHz
> > -cpu at mainbus0: not configured
> > +cpu0: apic clock running at 266MHz
> > +cpu1 at mainbus0: apid 1 (application processor)
> > +cpu1: Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz ("GenuineIntel"
> > 686-class) 2.53 GHz
> > +cpu1:
> > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,CX16,xTPR
> >
> > +acpiec0 at acpi0
> > +acpicpu0 at acpi0: C2, C1, PSS
> > +acpicpu1 at acpi0: C2, C1, PSS
> > +acpipwrres0 at acpi0: APPR
> > +acpipwrres1 at acpi0: COMP
> > +acpipwrres2 at acpi0: LPP_
> > +acpipwrres3 at acpi0: PGF0
> > +acpitz0 at acpi0: critical temperature 115 degC
> > +acpitz1 at acpi0: critical temperature 105 degC
> > +acpitz2 at acpi0: critical temperature 112 degC
> > +acpitz3 at acpi0: critical temperature 112 degC
> > +acpitz4 at acpi0: critical temperature 90 degC
> > +acpitz5 at acpi0: critical temperature 112 degC
> > +acpibat0 at acpi0: BAT0 model "Primary" serial 00903 2009/01/13 type LIon
> > oem "Hewlett-Packard"
> > +acpibat1 at acpi0: BAT1 not present
> > +acpiac0 at acpi0: AC unit online
> > +acpibtn0 at acpi0: SLPB
> > +acpibtn1 at acpi0: LID_
> > +acpivideo0 at acpi0: DGFX
> > +acpivout0 at acpivideo0: LCD_
> > +acpivout1 at acpivideo0: CRT_
> > +acpivout2 at acpivideo0: DVI_
> > +acpivout3 at acpivideo0: DD04
> >
> > Could it be that one of these (acpicpu, acpibat, ...) that /bsd has
> > but /bsd.rd has not makes /bsd panic while booting? Is there any
> > point in trying to disable them one after another in UKC? Having
> > ACPI would certainly be a benefit, because the kernel with ACPI enabled
> > correctly (?) recognizes the SpeedStep frequencies:
> >
> > cpu0: Enhanced SpeedStep 2528 MHz: speeds: 2534, 2533, 1600, 800 MHz
> >
> > The kernel without ACPI does not:
> >
> > cpu0: unknown Enhanced SpeedStep CPU, msr 0x0617492506004925
> > cpu0: using only highest and lowest power states
> > cpu0: Enhanced SpeedStep 2528 MHz: speeds: 19467, 1600 MHz
> >
> >
> > Regardless of the ACPI problem: I have noticed some
> > differences in the dmesg of the system I was running so far
> > and this one (I always look at these dmesg diffs as an addition
> > to plus??.html and current.html):
> >
> > -OpenBSD 4.6 (GENERIC.MP) #89: Thu Jul 9 21:32:39 MDT 2009
> > - dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
> > +OpenBSD 4.6-current (GENERIC.MP) #393: Wed Jan 20 06:54:30 MST 2010
> > + t...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
> >
> > -acpicpu0 at acpi0: C3, C2, C1, PSS
> > -acpicpu1 at acpi0: C3, C2, C1, PSS
> > +acpicpu0 at acpi0: C2, C1, PSS
> > +acpicpu1 at acpi0: C2, C1, PSS
> >
> > -acpiac0 at acpi0: AC unit offline
> > +acpiac0 at acpi0: AC unit online
> >
> > Is this because the dmesg of the previous system was created
> > when (booting and) running on battery, or is the C3 state no
> > longer supported on my machine?
> >
> > Beside this, an azalia warning message has disappeared
> > (I didn't notice any azalia problem before, though):
> >
> > azalia0: RIRB time out
> >
> >
> > Lastly, one older problem with hw.setperf: after I boot, my hw.setperf=5.
> > I have acpi disabled, apm is not configured, apmd is not running, I did
> > not touch hw.setperf. Who set it to 5? I remember Theo saying some
> > time ago that the kernel does it, wrongly - is it still there, or is
> > this a different problem?
> >
> >
> > Thank you for you time
> >
> > Jan
> >
> >
> > These are the dmesgs, in the following order:
> > - dmesg of the bsd.rd I used to install this
> > - dmesg of the installed bsd who panics
> > - dmesg of the installed bsd with acpi disabled
> >
> >
> > OpenBSD 4.6-current (RAMDISK_CD) #307: Wed Jan 20 07:01:26 MST 2010
> > t...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/RAMDISK_CD
> > RTC BIOS diagnostic error
> > bb<clock_battery,config_unit,memory_size,fixed_disk>
> > cpu0: Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz ("GenuineIntel" 686-class)
> > 2.53 GHz
> > cpu0:
> > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,CX16,xTPR
> > real mem = 2125561856 (2027MB)
> > avail mem = 2052620288 (1957MB)
> > RTC BIOS diagnostic error
> > bb<clock_battery,config_unit,memory_size,fixed_disk>
> > mainbus0 at root
> > bios0 at mainbus0: AT/286+ BIOS, date 11/10/08, SMBIOS rev. 2.4 @
> > 0x7edc4000 (21 entries)
> > bios0: vendor Hewlett-Packard version "68PDV Ver. F.06" date 12/15/2008
> > bios0: Hewlett-Packard HP EliteBook 8530w
> > acpi0 at bios0: rev 2
> > acpi0: tables DSDT FACP HPET APIC MCFG TCPA SSDT SLIC SSDT DMAR ASF! SSDT
> > SSDT SSDT
> > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> > cpu0 at mainbus0: apid 0 (boot processor)
> > cpu0: apic clock running at 265MHz
> > cpu at mainbus0: not configured
> > ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
> > ioapic0: misconfigured as apic 0, remapped to apid 1
> > acpiprt0 at acpi0: bus 1 (PEGP)
> > acpiprt1 at acpi0: bus 2 (RP01)
> > acpiprt2 at acpi0: bus 3 (RP02)
> > acpiprt3 at acpi0: bus 4 (RP03)
> > acpiprt4 at acpi0: bus 69 (RP05)
> > acpiprt5 at acpi0: bus 134 (PCIB)
> > acpiprt6 at acpi0: bus 0 (PCI0)
> > bios0: ROM list: 0xc0000/0xe200 0xce800/0x1000 0xcf800/0x1000
> > pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> > pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07
> > ppb0 at pci0 dev 1 function 0 "Intel GM45 PCIE" rev 0x07: apic 1 int 16
> > (irq 10)
> > pci1 at ppb0 bus 1
> > vga1 at pci1 dev 0 function 0 vendor "NVIDIA", unknown product 0x065c rev
> > 0xa1
> > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> > "Intel GM45 HECI" rev 0x07 at pci0 dev 3 function 0 not configured
> > pciide0 at pci0 dev 3 function 2 "Intel GM45 PT IDER" rev 0x07: DMA
> > (unsupported), channel 0 wired to native-PCI, channel 1 wired to native-PCI
> > pciide0: using apic 1 int 18 (irq 11) for native-PCI interrupt
> > pciide0: channel 0 ignored (not responding; disabled or no drives?)
> > pciide0: channel 1 ignored (not responding; disabled or no drives?)
> > "Intel GM45 AMT SOL" rev 0x07 at pci0 dev 3 function 3 not configured
> > em0 at pci0 dev 25 function 0 "Intel ICH9 IGP M AMT" rev 0x03: apic 1 int
> > 22 (irq 10), address 00:23:7d:e7:ac:60
> > uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 16
> > (irq 10)
> > uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 17
> > (irq 10)
> > uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 18
> > (irq 11)
> > ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 19
> > (irq 10)
> > usb0 at ehci0: USB revision 2.0
> > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> > "Intel 82801I HD Audio" rev 0x03 at pci0 dev 27 function 0 not configured
> > ppb1 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: apic 1 int 16
> > (irq 10)
> > pci2 at ppb1 bus 2
> > ppb2 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: apic 1 int 17
> > (irq 10)
> > pci3 at ppb2 bus 3
> > iwn0 at pci3 dev 0 function 0 "Intel WiFi Link 5300" rev 0x00: apic 1 int
> > 17 (irq 10), MIMO 3T3R, MoW, address 00:21:6a:0f:b2:8e
> > ppb3 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x03: apic 1 int 18
> > (irq 11)
> > pci4 at ppb3 bus 4
> > ppb4 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x03: apic 1 int 16
> > (irq 10)
> > pci5 at ppb4 bus 69
> > uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 20
> > (irq 10)
> > uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 22
> > (irq 10)
> > uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 18
> > (irq 11)
> > ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 20
> > (irq 10)
> > usb1 at ehci1: USB revision 2.0
> > uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> > ppb5 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93
> > pci6 at ppb5 bus 134
> > "Ricoh 5C832 Firewire" rev 0x06 at pci6 dev 9 function 0 not configured
> > "Ricoh 5C822 SD/MMC" rev 0x25 at pci6 dev 9 function 1 not configured
> > "Ricoh 5C843 MMC" rev 0x14 at pci6 dev 9 function 2 not configured
> > "Ricoh 5C592 Memory Stick" rev 0x14 at pci6 dev 9 function 3 not configured
> > "Ricoh 5C852 xD" rev 0x14 at pci6 dev 9 function 4 not configured
> > cbb0 at pci6 dev 9 function 5 "Ricoh 5C476 CardBus" rev 0xbb: apic 1 int 22
> > (irq 10)
> > cardslot0 at cbb0 slot 0 flags 0
> > cardbus0 at cardslot0: bus 135 device 0 cacheline 0x0, lattimer 0x20
> > pcmcia0 at cardslot0
> > pcib0 at pci0 dev 31 function 0 "Intel 82801IEM LPC" rev 0x03
> > ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: apic 1 int 21
> > (irq 10), AHCI 1.2
> > scsibus0 at ahci0: 32 targets
> > sd0 at scsibus0 targ 0 lun 0: <ATA, Hitachi HTS72322, FCDO> SCSI3 0/direct
> > fixed
> > sd0: 238475MB, 512 bytes/sec, 488397168 sec total
> > cd0 at scsibus0 targ 1 lun 0: <HL-DT-ST, DVDRAM GSA-T50L, SC04> ATAPI
> > 5/cdrom removable
> > usb2 at uhci0: USB revision 1.0
> > uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > usb3 at uhci1: USB revision 1.0
> > uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > usb4 at uhci2: USB revision 1.0
> > uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > usb5 at uhci3: USB revision 1.0
> > uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > usb6 at uhci4: USB revision 1.0
> > uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > usb7 at uhci5: USB revision 1.0
> > uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > isa0 at pcib0
> > isadma0 at isa0
> > pckbc0 at isa0 port 0x60/5
> > pckbd0 at pckbc0 (kbd slot)
> > pckbc0: using irq 1 for kbd slot
> > wskbd0 at pckbd0: console keyboard, using wsdisplay0
> > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> > rd0: fixed, 3800 blocks
> > "RICOH, Bay8Controller" (manufacturer 0x0, product 0x0) at pcmcia0 function
> > 0 not configured
> > "Chicony Electronics Co., Ltd. CKA7216" rev 2.00/32.18 addr 2 at uhub0 port
> > 5 not configured
> > "vendor 0x08ff Fingerprint Sensor" rev 2.00/17.03 addr 2 at uhub3 port 1
> > not configured
> > softraid0 at root
> > root on rd0a swap on rd0b dump on rd0b
> > iwn0: radio is disabled by hardware switch
> > iwn0: radio is disabled by hardware switch
> > iwn0: radio is disabled by hardware switch
> > iwn0: radio is disabled by hardware switch
> >
> >
> > OpenBSD 4.6-current (GENERIC.MP) #393: Wed Jan 20 06:54:30 MST 2010
> > t...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
> > RTC BIOS diagnostic error
> > bb<clock_battery,config_unit,memory_size,fixed_disk>
> > cpu0: Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz ("GenuineIntel" 686-class)
> > 2.53 GHz
> > cpu0:
> > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,CX16,xTPR
> > real mem = 2125561856 (2027MB)
> > avail mem = 2050801664 (1955MB)
> > RTC BIOS diagnostic error
> > bb<clock_battery,config_unit,memory_size,fixed_disk>
> > mainbus0 at root
> > bios0 at mainbus0: AT/286+ BIOS, date 11/10/08, SMBIOS rev. 2.4 @
> > 0x7edc4000 (21 entries)
> > bios0: vendor Hewlett-Packard version "68PDV Ver. F.06" date 12/15/2008
> > bios0: Hewlett-Packard HP EliteBook 8530w
> > acpi0 at bios0: rev 2
> > acpi0: tables DSDT FACP HPET APIC MCFG TCPA SSDT SLIC SSDT DMAR ASF! SSDT
> > SSDT SSDT
> > acpi0: wakeup devices LANC(S5) HDEF(S4) RP02(S5) WNIC(S5) RP03(S5) ECF0(S5)
> > RP05(S5) ECF0(S5) RP06(S5) NIC_(S5) USB1(S3) USB2(S3) USB3(S3) USB4(S3)
> > USB5(S3) USB6(S3) U6RM(S3) EHC1(S3) EHC2(S3) PCIB(S5) HST1(S5)
> > acpitimer0 at acpi0: 3579545 Hz, 24 bits
> > acpihpet0 at acpi0: 14318179 Hz
> > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> > cpu0 at mainbus0: apid 0 (boot processor)
> > cpu0: apic clock running at 266MHz
> > cpu1 at mainbus0: apid 1 (application processor)
> > cpu1: Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz ("GenuineIntel" 686-class)
> > 2.53 GHz
> > cpu1:
> > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,CX16,xTPR
> > ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
> > ioapic0: misconfigured as apic 0, remapped to apid 1
> > acpiprt0 at acpi0: bus 1 (PEGP)
> > acpiprt1 at acpi0: bus 2 (RP01)
> > acpiprt2 at acpi0: bus 3 (RP02)
> > acpiprt3 at acpi0: bus 4 (RP03)
> > acpiprt4 at acpi0: bus 69 (RP05)
> > acpiprt5 at acpi0: bus 134 (PCIB)
> > acpiprt6 at acpi0: bus 0 (PCI0)
> > acpiec0 at acpi0
> > acpicpu0 at acpi0: C2, C1, PSS
> > acpicpu1 at acpi0: C2, C1, PSS
> > acpipwrres0 at acpi0: APPR
> > acpipwrres1 at acpi0: COMP
> > acpipwrres2 at acpi0: LPP_
> > acpipwrres3 at acpi0: PGF0
> > acpitz0 at acpi0: critical temperature 115 degC
> > acpitz1 at acpi0: critical temperature 105 degC
> > acpitz2 at acpi0: critical temperature 112 degC
> > acpitz3 at acpi0: critical temperature 112 degC
> > acpitz4 at acpi0: critical temperature 90 degC
> > acpitz5 at acpi0: critical temperature 112 degC
> > acpibat0 at acpi0: BAT0 model "Primary" serial 00903 2009/01/13 type LIon
> > oem "Hewlett-Packard"
> > acpibat1 at acpi0: BAT1 not present
> > acpiac0 at acpi0: AC unit online
> > acpibtn0 at acpi0: SLPB
> > acpibtn1 at acpi0: LID_
> > acpivideo0 at acpi0: DGFX
> > acpivout0 at acpivideo0: LCD_
> > acpivout1 at acpivideo0: CRT_
> > acpivout2 at acpivideo0: DVI_
> > acpivout3 at acpivideo0: DD04
> > bios0: ROM list: 0xc0000/0xe200 0xce800/0x1000 0xcf800/0x1000
> > cpu0: Enhanced SpeedStep 2528 MHz: speeds: 2534, 2533, 1600, 800 MHz
> > pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> > pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07
> > ppb0 at pci0 dev 1 function 0 "Intel GM45 PCIE" rev 0x07: apic 1 int 16
> > (irq 10)
> > pci1 at ppb0 bus 1
> > vga1 at pci1 dev 0 function 0 vendor "NVIDIA", unknown product 0x065c rev
> > 0xa1
> > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> > wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> > "Intel GM45 HECI" rev 0x07 at pci0 dev 3 function 0 not configured
> > pciide0 at pci0 dev 3 function 2 "Intel GM45 PT IDER" rev 0x07: DMA
> > (unsupported), channel 0 wired to native-PCI, channel 1 wired to native-PCI
> > pciide0: using apic 1 int 18 (irq 11) for native-PCI interrupt
> > pciide0: channel 0 ignored (not responding; disabled or no drives?)
> > pciide0: channel 1 ignored (not responding; disabled or no drives?)
> > "Intel GM45 AMT SOL" rev 0x07 at pci0 dev 3 function 3 not configured
> > em0 at pci0 dev 25 function 0 "Intel ICH9 IGP M AMT" rev 0x03: apic 1 int
> > 22 (irq 10), address 00:23:7d:e7:ac:60
> > uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 16
> > (irq 10)
> > uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 17
> > (irq 10)
> > uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 18
> > (irq 11)
> > ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 19
> > (irq 10)
> > usb0 at ehci0: USB revision 2.0
> > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> > azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: apic 1
> > int 17 (irq 10)
> > azalia0: codecs: Analog Devices AD1984A, AT&T/Lucent/0x1040, using Analog
> > Devices AD1984A
> > audio0 at azalia0
> > ppb1 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: apic 1 int 16
> > (irq 10)
> > pci2 at ppb1 bus 2
> > ppb2 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: apic 1 int 17
> > (irq 10)
> > pci3 at ppb2 bus 3
> > iwn0 at pci3 dev 0 function 0 "Intel WiFi Link 5300" rev 0x00: apic 1 int
> > 17 (irq 10), MIMO 3T3R, MoW, address 00:21:6a:0f:b2:8e
> > ppb3 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x03: apic 1 int 18
> > (irq 11)
> > pci4 at ppb3 bus 4
> > ppb4 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x03: apic 1 int 16
> > (irq 10)
> > pci5 at ppb4 bus 69
> > uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 20
> > (irq 10)
> > uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 22
> > (irq 10)
> > uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 18
> > (irq 11)
> > ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 20
> > (irq 10)
> > usb1 at ehci1: USB revision 2.0
> > uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> > ppb5 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93
> > pci6 at ppb5 bus 134
> > "Ricoh 5C832 Firewire" rev 0x06 at pci6 dev 9 function 0 not configured
> > sdhc0 at pci6 dev 9 function 1 "Ricoh 5C822 SD/MMC" rev 0x25: apic 1 int 22
> > (irq 10)
> > sdmmc0 at sdhc0
> > "Ricoh 5C843 MMC" rev 0x14 at pci6 dev 9 function 2 not configured
> > "Ricoh 5C592 Memory Stick" rev 0x14 at pci6 dev 9 function 3 not configured
> > "Ricoh 5C852 xD" rev 0x14 at pci6 dev 9 function 4 not configured
> > cbb0 at pci6 dev 9 function 5 "Ricoh 5C476 CardBus" rev 0xbb: apic 1 int 22
> > (irq 10)
> > cardslot0 at cbb0 slot 0 flags 0
> > cardbus0 at cardslot0: bus 135 device 0 cacheline 0x0, lattimer 0x20
> > pcmcia0 at cardslot0
> > pcib0 at pci0 dev 31 function 0 "Intel 82801IEM LPC" rev 0x03
> > ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: apic 1 int 21
> > (irq 10), AHCI 1.2
> > scsibus0 at ahci0: 32 targets
> > sd0 at scsibus0 targ 0 lun 0: <ATA, Hitachi HTS72322, FCDO> SCSI3 0/direct
> > fixed
> > sd0: 238475MB, 512 bytes/sec, 488397168 sec total
> > cd0 at scsibus0 targ 1 lun 0: <HL-DT-ST, DVDRAM GSA-T50L, SC04> ATAPI
> > 5/cdrom removable
> > usb2 at uhci0: USB revision 1.0
> > uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > usb3 at uhci1: USB revision 1.0
> > uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > usb4 at uhci2: USB revision 1.0
> > uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > usb5 at uhci3: USB revision 1.0
> > uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > usb6 at uhci4: USB revision 1.0
> > uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > usb7 at uhci5: USB revision 1.0
> > uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > isa0 at pcib0
> > isadma0 at isa0
> > pckbc0 at isa0 port 0x60/5
> > pckbd0 at pckbc0 (kbd slot)
> > pckbc0: using irq 1 for kbd slot
> > wskbd0 at pckbd0: console keyboard, using wsdisplay0
> > pms0 at pckbc0 (aux slot)
> > pZZZZ0: using irq 12 for aux slot
> > wsmouse0 at pms0 mux 0
> > pcppi0 at isa0 port 0x61
> > midi0 at pcppi0: <PC speaker>
> > spkr0 at pcppi0
> > lpt0 at isa0 port 0x378/4 irq 7
> > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> > mtrr: Pentium Pro MTRR support
> > "RICOH, Bay8Controller" (manufacturer 0x0, product 0x0) at pcmcia0 function
> > 0 not configured
> > copyvalue: efff0021Store to default type! efff0021
> >
> > 5c12 Called: \\_SB_.PCI0.LPCB.EC0_.RPPC
> > local0: 0xd2c14d04 cnt:01 stk:60 integer: 2
> > local1: 0xd2c1d3c4 cnt:01 stk:61 integer: 0
> > local2: 0xd2c34384 cnt:02 stk:62 objref: 0xd2c20044 index:0
> > opcode:CondRef
> > uvm_fault(0xd08ad720, 0xefffe000, 0, 1) -> d
> > kernel: page fault trap, code=0
> > Stopped at aml_nodename+0x1b: pushl 0(%ebx)
> > ddb{0}> rebooting...
> >
> >
> > OpenBSD 4.6-current (GENERIC.MP) #393: Wed Jan 20 06:54:30 MST 2010
> > t...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
> > RTC BIOS diagnostic error
> > bb<clock_battery,config_unit,memory_size,fixed_disk>
> > cpu0: Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz ("GenuineIntel" 686-class)
> > 2.53 GHz
> > cpu0:
> > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,CX16,xTPR
> > real mem = 2125561856 (2027MB)
> > avail mem = 2050801664 (1955MB)
> > User Kernel Config
> > UKC> disable acpi
> > 476 acpi0 disabled
> > UKC> quit
> > Continuing...
> > RTC BIOS diagnostic error
> > bb<clock_battery,config_unit,memory_size,fixed_disk>
> > mainbus0 at root
> > bios0 at mainbus0: AT/286+ BIOS, date 11/10/08, SMBIOS rev. 2.4 @
> > 0x7edc4000 (21 entries)
> > bios0: vendor Hewlett-Packard version "68PDV Ver. F.06" date 12/15/2008
> > bios0: Hewlett-Packard HP EliteBook 8530w
> > acpi at bios0 function 0x0 not configured
> > pcibios at bios0 function 0x1a not configured
> > bios0: ROM list: 0xc0000/0xe200 0xce800/0x1000 0xcf800/0x1000
> > cpu0 at mainbus0: (uniprocessor)
> > cpu0: unknown Enhanced SpeedStep CPU, msr 0x0617492506004925
> > cpu0: using only highest and lowest power states
> > cpu0: Enhanced SpeedStep 2528 MHz: speeds: 19467, 1600 MHz
> > pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> > pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07
> > ppb0 at pci0 dev 1 function 0 "Intel GM45 PCIE" rev 0x07: irq 10
> > pci1 at ppb0 bus 1
> > vga1 at pci1 dev 0 function 0 vendor "NVIDIA", unknown product 0x065c rev
> > 0xa1
> > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> > wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> > "Intel GM45 HECI" rev 0x07 at pci0 dev 3 function 0 not configured
> > pciide0 at pci0 dev 3 function 2 "Intel GM45 PT IDER" rev 0x07: DMA
> > (unsupported), channel 0 wired to native-PCI, channel 1 wired to native-PCI
> > pciide0: using irq 11 for native-PCI interrupt
> > pciide0: channel 0 ignored (not responding; disabled or no drives?)
> > pciide0: channel 1 ignored (not responding; disabled or no drives?)
> > "Intel GM45 AMT SOL" rev 0x07 at pci0 dev 3 function 3 not configured
> > em0 at pci0 dev 25 function 0 "Intel ICH9 IGP M AMT" rev 0x03: irq 10,
> > address 00:23:7d:e7:ac:60
> > uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: irq 10
> > uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: irq 10
> > uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: irq 11
> > ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: irq 10
> > usb0 at ehci0: USB revision 2.0
> > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> > azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: irq 10
> > azalia0: codecs: Analog Devices AD1984A, AT&T/Lucent/0x1040, using Analog
> > Devices AD1984A
> > audio0 at azalia0
> > ppb1 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: irq 10
> > pci2 at ppb1 bus 2
> > ppb2 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: irq 10
> > pci3 at ppb2 bus 3
> > iwn0 at pci3 dev 0 function 0 "Intel WiFi Link 5300" rev 0x00: irq 10, MIMO
> > 3T3R, MoW, address 00:21:6a:0f:b2:8e
> > ppb3 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x03: irq 11
> > pci4 at ppb3 bus 4
> > ppb4 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x03: irq 10
> > pci5 at ppb4 bus 69
> > uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: irq 10
> > uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: irq 10
> > uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: irq 11
> > ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: irq 10
> > usb1 at ehci1: USB revision 2.0
> > uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> > ppb5 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93
> > pci6 at ppb5 bus 134
> > "Ricoh 5C832 Firewire" rev 0x06 at pci6 dev 9 function 0 not configured
> > sdhc0 at pci6 dev 9 function 1 "Ricoh 5C822 SD/MMC" rev 0x25: irq 10
> > sdmmc0 at sdhc0
> > "Ricoh 5C843 MMC" rev 0x14 at pci6 dev 9 function 2 not configured
> > "Ricoh 5C592 Memory Stick" rev 0x14 at pci6 dev 9 function 3 not configured
> > "Ricoh 5C852 xD" rev 0x14 at pci6 dev 9 function 4 not configured
> > cbb0 at pci6 dev 9 function 5 "Ricoh 5C476 CardBus" rev 0xbb: irq 10
> > cardslot0 at cbb0 slot 0 flags 0
> > cardbus0 at cardslot0: bus 135 device 0 cacheline 0x0, lattimer 0x20
> > pcmcia0 at cardslot0
> > pcib0 at pci0 dev 31 function 0 "Intel 82801IEM LPC" rev 0x03
> > ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: irq 10, AHCI
> > 1.2
> > scsibus0 at ahci0: 32 targets
> > sd0 at scsibus0 targ 0 lun 0: <ATA, Hitachi HTS72322, FCDO> SCSI3 0/direct
> > fixed
> > sd0: 238475MB, 512 bytes/sec, 488397168 sec total
> > cd0 at scsibus0 targ 1 lun 0: <HL-DT-ST, DVDRAM GSA-T50L, SC04> ATAPI
> > 5/cdrom removable
> > usb2 at uhci0: USB revision 1.0
> > uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > usb3 at uhci1: USB revision 1.0
> > uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > usb4 at uhci2: USB revision 1.0
> > uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > usb5 at uhci3: USB revision 1.0
> > uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > usb6 at uhci4: USB revision 1.0
> > uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > usb7 at uhci5: USB revision 1.0
> > uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > isa0 at pcib0
> > isadma0 at isa0
> > pckbc0 at isa0 port 0x60/5
> > pckbd0 at pckbc0 (kbd slot)
> > pckbc0: using irq 1 for kbd slot
> > wskbd0 at pckbd0: console keyboard, using wsdisplay0
> > pms0 at pckbc0 (aux slot)
> > pckbc0: using irq 12 for aux slot
> > wsmouse0 at pms0 mux 0
> > pcppi0 at isa0 port 0x61
> > midi0 at pcppi0: <PC speaker>
> > spkr0 at pcppi0
> > lpt0 at isa0 port 0x378/4 irq 7
> > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> > biomask ef7d netmask ef7d ttymask ffff
> > mtrr: Pentium Pro MTRR support
> > "RICOH, Bay8Controller" (manufacturer 0x0, product 0x0) at pcmcia0 function
> > 0 not configured
> > uvideo0 at uhub0 port 5 configuration 1 interface 0 "Chicony Electronics
> > Co., Ltd. CKA7216" rev 2.00/32.18 addr 2
> > video0 at uvideo0
> > ugen0 at uhub3 port 1 "AuthenTec Fingerprint Sensor" rev 2.00/17.03 addr 2
> > vscsi0 at root
> > scsibus1 at vscsi0: 256 targets
> > softraid0 at root
> > root on sd0a swap on sd0b dump on sd0b
> > iwn0: radio is disabled by hardware switch
> > iwn0: RF switch: radio disabled
> > iwn0: radio is disabled by hardware switch
> > iwn0: RF switch: radio disabled
> > iwn0: radio is disabled by hardware switch
> > iwn0: RF switch: radio disabled
> > iwn0: radio is disabled by hardware switch
> > iwn0: RF switch: radio disabled
> > scsibus2 at softraid0: 1 targets
> > sd1 at scsibus2 targ 0 lun 0: <OPENBSD, SR CRYPTO, 003> SCSI2 0/direct fixed
> > sd1: 161450MB, 512 bytes/sec, 330649751 sec total
>
--
Gilles Chehade
freelance developer/sysadmin/consultant
http://www.poolp.org
