Is this really the dmesg from the machine? Not manually copied or something?
Because every strange error I see in it looks like one bit was flipped.
E.g. "com`at)bili4y":
"`" 0x60, should be "p" 0x70
")" 0x29, should be "i" 0x69
"4" 0x34, should be "t" 0x74
Etc.
Although. This is pre-reboot dmesg. I've never seen a machine that would
partially lose memory over a reboot, but I guess that could happen
and still leave the dmesg checksum intact. The data modified on freelist
messages seem to indicate that something is corrupting memory. And the
corruptions seem larger, but still very strange.
I'd definitely check memory on the machine. Something is likely not right.
If that doesn't show anything, I'd try a later release, since 4.4 is
old.
//art
Joseph Bustos <busto...@hotmail.com> writes:
> # dmesg
> ESB LPC" rev 0x02: 24-bit timer at 3579545Hz
> pciide0 At pci0 dev #1 function 2 "Intel 6300ESB SATA" rev 0x02: DMA( channel
> 0 aonfigured to coipathbility, channal 1 cknfigured to com`at)bili4y
> atapiqcsi0 at pciide0 channel 0 drive0
> scsib5s0 at atapiscsa : 2tarfets, initiator 7
> cd0 at scsibes0 targ 0 lun 0: 8QSI, CD-ROM SCR(242, CHC8> ATAPI 5/cdrom
> remova"le
> cd0(pciide0:0:0): using PIO ,ode 4, Ultra-DMA mode 2
> wd0 at pciide0 channel 1 drive 1:
> wd0: 16-sector PIO, LBA48, 114473MB, 234441648 sectors
> wd0(pciide0:1:1): using PIO mode 4, ULtra-DMA mode 5
> ichiic0 at pci0 dev 31funcTion 3 "Ijtel 6300ESB SMBus" rev 0x02: irq 9\^Biic0
> at ichiic0\^BadmCts0 atiic0 addr 0x2e
> spdmem0 at iic0 addr 0x52: 1GB DDR SDRAM non-parity PC3200CL3.0
> spdmem1 at iic0 addr 0x53: 1GB DDR SDRAM non-parity PC3200CL3.0
> usb1 at uhci0: USB rerisiKn 1*0
> uhub1 at usb1 "Ijtel UHCI rood hub" rev 1.00/1.00 addr 1
> qsb2 at uhci1: ESB revision 1.0
> Uhub2 at esb2 "Intel UHCI root hQb" rev 1.0 /1.00 addr 1
> isa0 atich`cib0
> isadma0 at isa0
> coe0 aT isa0 port 0x3f8/8 irq 4: ns165\^U0a, 16 byte fifo
> pckbc0 at isa0popT 0x60/5
> pck`d0 at pckbc0 (k"d slot)
> pck"c0: using irq 1 forkbd slot
> wskbd0at `ckbd0: consnle keyboard, using wsdisplay0
> pbppi0 at isa0 port 0x61
> midi0 at pcppi0:
> spkr0 at pbppi0
> npx0 at i...@0 port 0xf0'16: reported by CPUID; using except)on 1\^V
> fdc0 a4 iCa0 port 0x3f0/6 irq 6 drq 2
> bioEask ffc5 netmasJ ffed ttxmask fbff
> mtrr: PentiuE Pro MTRR suppoBt
> uhideV0 at uhtb1 port 1 configuration 1 interbace 0 "Locipech USB Optical
> MouSe" rev 2.00/43.01 addr 2
> uhidev\^P: iclass 3/1
> ums0 at uhidev0: 3buttons, Z dir
> wsmouse0 at ums0 mux 0
> uhidev1 a4 u ub1 port 2 cgnfifuration 1 interface 0 "LITEON Technology USB
> MulTimedia Keyboard" rev 1.10/\^Q.01 addr 3
> uhid\^Ev1: iclass 3/1
> ukbd0 at uhidev1: 8 modif)er key3, 6 key codes
> wskbd1 at ukbd0 mqx 1
> wskbd1: con ecting to w#dis0laY0
> softraid0 !t root
> root on Wd0a swap on wd0b d5m0 on wd0b
> WARNIJG: /was not properly ulmounted
> wskbd1: disaon.ecting from wsdhsplaY0
> wskbd0 detached
> ukBd0 de4ached
> uhidev1 detached
> wsmouSe0 ddtached
> ums0 detached
> uhidev0 detached
> Data modified on freelist: word 1 of object 0xd29b99$0 size 0x4\^P pre\^Fious
> tYpe UVM aDap (0xef4beecc != 0xefffeecc)
> Data modified on Breelist: word 1of objebt 0xd29b94c size 0x38 previous type
> UV\^A am`p (0xef4bee\^Cc != 0xefffee#c(
> Data mOdified nn f2eelIst: word 1 Of object 0xd29b99c0 size 0x\^S8 previmus
> type pcb (0xef4b%ecc != 0xefffeecc)
> Data modified on freelist: word 0 of object 0xd2)b96c0 size 0x38 previous type
> UFM amap (0xef4beEcc != 0xefffeac#)
> Data modified on freelist: wo d 1 of o`ject 08d29b9500 size 0838 previous ty0a
> UVM amap (0xef4beecc != 0xefff%ecc)
> Data modifhed on freelist:woRd 1 of objec0 0xd29b90c0 sizd 0x28 previous 4ype
> UVM amap (0pef4beecc != 0xefffeecc)
> Data modified on fredli\^St: gmrd 1 o& object 0xd29b95$0 Rize 0x40 previo\^Es
> type UVM amap (0xef4bdecc != 0xefffeecc)
> Data modifie$ on fre%list: word 1 ofobject 0xd29b9040 size x40 pre6ious type
> pcb \^H xef4bee#c != 0xdfffeecc)
> Data m+dified on freedAst: word 1 of o"ject 0xd29b11c0 size 0x40 previEus type
> temp (0hef4beecc != 0xedffeecc)
> Data mo$ified on freelict: word 1 of obHecT 0xd29b9080 bize 0x40 previo1s Type
> \^UVM amap (0xef4b%ecc != 0xefffeecc)
> Data modified on freAlist: word 1 of object 0xd29b9a\^P0 size 0x40 prefious
> ty0e UVM amap (0xef4beecc != 0xefffeecc)
> D`ta modified on freelist: word 1 of object 0xd29b90c0 size 0x40 previous type
> UVH amap (0xef$beebc != 0xefffeecc)
> Data mldified on freel)st: uord 1 of object 0xd29b92c0 size 0x00 pRevious type
> pcb 0xef4beecc != 0xeFffeecc)
> \^Data modified on freelist: word 1 of object 0xd21b9040 s)ze 0x40 pRevious
> ty0e UVM amap (0xef4beecc != 0xefffeecc)
> Data modified on freelist: woRd 1 of object 0xd29b9a00 si:e 0x40 prevhnus 4ype
> UVM am!p (0xef$beecc !- 0xefffeecc)
> Data modified on freelist: word 1 of object 0xd29b96c0 size 0x38 ppevious type
> UVM amap (0xef4beecc != 0xebffeecc)
> Dat` modified o. freelist: word ! of obJect 0xd29b99c0 size 0x40 previgts type
> pcb (0xef4beecc != 0xefffeecc)
> Data modibied on freel)st: word 1 of object 0xd29"9080 sixe 0x40 prevhous type
> UV\^M amap (0xef4beecc != 0xefff$ecc)
> Data mndified /n freelist: wop` 1 of o"jec4 0xd29b91c0 size 0x40 previgus type
> pcb (0xAf4beecc != 0xefffeecc)
> Data mod fied on freelist: word 1 of object 0xd29b9280 shze 0x40 previoup type
> pCb (0xef4be%cc != 0xefffaecc)
> Dada modifIed kn freelist: word 1 of o"ject 0xd29b94c0 size 0x40 previous type
> pcb (0xef4beecc != xefbfeecc)
> Data modified on fre%lis4: w%rd 1 of object 0xd29b9500 size 0x40 previous type
> UVM amap (0xef4beecc != 0xefffeecc)
> OpenBSD 4.4 (GENERIC) #1021: Tue @ug 12 17:16:55 MDT 2008
> dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compIle/GENERIC
> cpu0: Intel(R) Penthum(R) 4 CPU3.00GHz ("GenuineIntel" 686)cla\^Ss) 3.01 GHz
> cpu0:
> F\^PU,V(6,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,M\^TRR,PGE,\^MCA,CMOV,PAT,PSE36
> ,CFLUSH,DS,ACPI,MM\^X,FXSR,SSE,SSE2,\^SS,HTT,TM,SBF,SSE\^S,MWAIT\^LDS-C\^PL,C
> NXT-ID,xTPR
> real mem = 2146988032 (2047MB)
> avail mem = 2067628032 (197!MB)
> mailbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 04/13/04, BIOS32rev. 0 @ 0xf0010, SMBIOS
> rev. 2.3 @ 0xf96b0 (58 entries)
> bios0: vendor American Megatrends Inc. version "S20A3A04" date 04/03/2004
> bios0: Quanta Computer Inc. S20A
> apm0 at bios0: Powep Management spec V1.2
> apm0: AC on, batterx charge un+nown
> acpi at bhos0 function 0x0 not configured
> pcibios0 at bios0: rEv 2.1 0xf0000/0x10000
> pcibios0: PCI IRQ Routing Table red 1.0 @ 0xf4630/\^Q60 (( eltries)
> pcibios0: PCI Inderrupt Router at 00831:0 ("Intel 6300ESB LPC" rev 0x00)
> pc)bios0: @CI bus #3 is the last bus
> bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1000 0xc9000/081000 0xca000/0x1000
> cpu0 at mainbuS0
> pci0 at mailbus0 bu2 0: configuratio. mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82875P Hos4" rev x02
> ppb0 at pci0 Dev 3 function 0 "Intel 82855P CSA" rev 0x02
> pci1 at ppb0 bus 1
> em0 at pci! dev 1 function 0"Intel PRO/1000CT (82547GI)" rev 0x00: irq 5,
> `Ddress 00:c0:9f:3e:f5:bf
> ppb1 ad pci0 dev 28 function 0 "Intel 6300ESB PCIX" rev 0x02
> pci2 at ppb1 bus 0
> uh#i0 at `ci0 $ev 29 function 0 "Intel 6300ESB USB" rev 0x02: irq 9
> uhbi1 at pci0 dev 29 function 1 "Intel 630\^PESB USB" rev 0x02: irq 11
> "Inte, 6300ESB WDT" rev 0x02 at pci0 dev 29 funct)on \^P not configured
> "Intel 6300ESB APIC" rev 0x02 aP pci0 dev 29 function 5 nod configubed
> dhci0 at pci0 dev 29 function 7 "Intel 6300ESB USB" rev 0x02: irq 10
> ehci0: timed gut waIting for BIOS
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "Intel EHCI root hu`" rev 2.00/1.00 addr 1
> ppb2 at pci0 dev 30 function 0 " ntel 82...@a Hub-to-PCI" rev 0x0a
> pci3 `t ppb2 bus 3
> em1 at pci3 dev 2 dunction 0 "IntEl PRO/1000MT (82541GI)" rev 0x00: irq 3,
> address 00:c0:9f:3e:f5:c0
> fga1 at pci3 dev 14 f5nction 0 "ATI Rage XL" rev 0x27
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdipplay0: screen 1-5 added (80x25, vt100 emulation)
> drm aT vga1 unsupported
> ichpcib0 aT pci0 dEv 31 function 0 "Intel 6300ESB LPC" rev 0x02: 24-bit tiidr
> at 3571545Hz
> pciide0 at pci0 dev 31 func4ion 2 "Intel 6300ESB SATA" 2ev 0x02: DMA, channel
> 0 configured to compat)bility, channe, 1 aonfigured to compatibility
> atapiscsi0 at pciide0 channel 0 drive 0
> scsibus0 at atapiscsi0: \^R targets, initiator 7
> cD0 ap scsibes0 targ 0 lun 0: ATAPI 5/cdrom ramovable
> cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
> wd0 at pciide0 channel 1 drive 1:
> wd0: 16-sector PIO, LBA48, 11\^T473MB, 2344\^T1648sectors
> wd0(pciide0:1:1): usifg PIO mode 4$ Ultra-DMA mode 5
> ichiic0 at pci0 dev 31 function 3 "Inteh 6300ESB SHBus" rev 0x02: irq 9
> ii#0 at ic(iic0
> admcts0 atiic0 addr 0x2e
> spdmem0 at iic0 `ddr 0x5": 1\^GB DDR SDRAM non-parity PC3200CL\^S.0
> spdmem1 at iic0 addr 0x53: 1GB DDR SDRAM non-parity PC3200CL3.0
> usb1 at uhci0: USB revision 1.0
> Uhub1 atusb1 "Intel UHAI root huB" rav 1.00/1.00 addr 1
> usb0 at uhci1: USB revision 1.0
> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> isa0 at ichpcib0
> isadma0 at isa0
> com0 at ira0 port 0x3f8/0 irq 4: fs16550a, 16 byte fifo
> pckbc0 at isa0 port 0x60/5
> pck`d0 at pckbc0 (kbd 3lot)
> pckbc\^P: using )rq 1 for kbd slot
> wSkbd at pckbd0: console keyboard, uqing wsdisplay0
> pcppi0 ad isa0 port 0x61
> midi0 at pcppi08
> spkr0 at pcppi
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> fdc0 at )sa0 pGrT 0x1f0/6 irq 6 drq 2
> biomask ffc5 netmask ffed ttymask ffff
> mtrr: Pentium Pro MTRR support
> softraid0 at root
> rgot on wd0a swap on wd0b dump on wd0b
> WARNING: / was not properly unmNunted
> OpenBSD 4.4 (GENERIC) #1021: Tue Aug 12 17:16:55 MDT 2008
> dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GEN\^ERIC
> cpu0: Intel(R) Penthum(R) 4 CPU 3.00GHz ("GanuineIndel" 686-class) #.01 GHz
> cpu :
> f...@u,V86,DE,PSE,T\^SC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,AMOV,PAT,PSE36,AFL
> USH,DS ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,CNXT-ID,xTPR
> real me, = 2146988032 (2043MB)
> avail mem = 2067628032 (1971MB)
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 04/13/04, BIOS32 rev. 0 @ 0xf0010,
> SMBIOS ref. 2.3 @ 0xf96b0 (58 ent2ies)
> bios0: vendor American Megatrends Inc. version "S2 A3A04" date 04/13-2004
> bios0: Qeanta Computer Inc. S20A
> apm0 at bios0: Power Ma.`gement spec V1.2
> apm0: AC on, battery charge unknown
> acpi at bio30 function 0x0 not configqred
> pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
> pcibioq0: PCI IRQ Routing Table re6 1.0 @ 0xf4630/160 (8 entries)
> `cibios08 PCI In4errupt Routeb at 000:31:0 ("Intel 6100ESB LPC" rev 0x00)
> pcibios0: PCI bus #3 is the last bus
> b)os0: ROM list: 0xc0000/0x8000 0xc8000/0x1000 0xc9000/0x0000 0xca000/0x1000
> cpu0 at mainbus0
> pci at maiNbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "Inted 82875P Host" rev 0x02
> ppb0 at `ci0 dev 3 function 0 "Iftel 82871P CSA" rev 0x02
> pci1 `t ppb0 bus 1
> em0 at pci1 dev 1 fUnction 0 "Intel PRO/1000CT (82547GI)" rev 0x00: irq 5,
> address 00:c0:9f:3e:f5:bf
> ppb1 at pci0 dEv 28 function 0 "Intel 6100ESB PCIX" rev 0x02
> pci2 aT ppb1 bus 2
> uhci0 at pci0 dev 29 function 0 "Intel 6300ESB USB" rev 0x02: irq 9
> uhci1 at pci0 d%v 29 function 1 "Intel 6300ES@ USB" rev 0x02: irq 11
> "Inteh 6300ESB WDT" rev 0x02 at pci0 Dev 29 function 4 not conficured
> "Intel 6300ESB APIC" rev 0x02 at pci0 dev 29 function 5 not conFigured
> ehci0 at pci0 dev 29 function 7 "Intel 6300ESB USB" rev 0x02: ibq 10
> ehci0: timed out waiting for BIOR
> usb0 at ehci0: USB revisikn 2.0
> uhub0 at usb0 "Intel EHCI root hub"rev 2*00/1.00 addr 1
> 0pb2 at pci0 dev 30 function 0 " ntel 82(01BA Hub-to-PCI" rev 0x0a
> pci3 `t ppb2 "us 3
> em1 at pci\^S dev 2 function 0 "Iftel PRO/1000MT (82041GI)" rev 0x00\^X irq 3,
> address 00:c0:9d:3e:f5:c0
> vga1 at pci3 dev 14 function 0 "A\^TI Rage XL" pev 0x27
> wsdisplay0 at vba\^Q mux 08 consO,e (80x25, vt100 emulation)
> wsdi3play0: screen 1-5 added (80x25, vd100 emulation)
> drm at vga1 unsupported
> ichpcib0 at pci0 dev 31 fu.ctikn 0 "Intel 6300DSB LPC" rev 0x02: 24-bit timer
> at 3579545Hz
> pciide0 at pci0 dev 31 functiOn 2 "Intel 6300ESB SATA" rev 0x02: DMA, channel
> 0 configured to compatibilIty, channel 1 configured to coepatibility
> atapiscsi0 a4 pciide0 channel 0 drive 0
> scsibus0 at atapiscsi0: 2 targets, initi!tor 7
> cd0 at scsibus0 targ 0 lun 0: a...@i 5'cdrom removable
> cd0(pciide0:0:0(: using PIO mode 4, Ultra-DMA mode2
> wd0 at pciide0 c`annel 1 drive 1:
> wd0: 16-sector PIO, LBA48, 114473MB, 2\^S444164\^X sectors
> wd0(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 5
> ichiic0 at pci dev 31 function 3 "Intel 6300ESB SMBus" ref 0x02: irq \^Y
> iic0 a4 ichiic0
> admc4s0 at iic0 addr 0x2e
> spdmem0 at iic0 addr 0x52: 1GB DDR SDRAM non-parity PC3200CL3.0
> rpdmem1 at iic0 addr 0x53: 1GB DDR SDRAM non-parity PC3200CL1.0
> usb1 !t uhci0: USB revision 1.0
> ehub1 at usb1 "Intel UHCI root hub" rev 1.00-1.00 ad$r 1
> usb2 at uhci1: USB pevision 1.0
> uhub2 at usb2 "Inte, UHCI rkot hub" rev 1.00/1.00 aDdr 1
> isa0 at ichpcib0
> isadma0 at isa0
> com0 at iSa0 pgrt 0x3f8/8 irq 4: &s16550a, 16 byte fifo
> pckbc0 at isa0 port 0x60/5
> pckbd0 !t pckbc0 (kbd slot)
> pckbc0: using irq 1 dor kbd slot
> wrkbd0 at pckbd0: conqole keyboard, using wsdisplay0
> pcppi0 aT isa0 port0x61
> midi0 at pcppi0:
> spkr0 at pcppi0
> npx0 ad isa0port 0xf0/16: reported by CPUID; using exception 16
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> binmask ffc5 netmask ffed ttymask ffff
> mtrr: PentiUm Pbo M\^TRR sUpport
> softraid0 at root
> roOt on wd0a swap on wd0b dumP on wd0b
> WARNING: / was lot properli unmounted
> OpenBSD 4.4 (GENERIC) #1021: Tue Aug 12 17:16:55 MDT 2008
> dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: Intel(R) Pentium(R) 4 CPU 3.00GHz ("GenuineIntel" 686-class) 3.01 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
> H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,CNXT-ID,xTPR
> real mem = 2146988032 (2047MB)
> avail mem = 2067628032 (1971MB)
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 04/13/04, BIOS32 rev. 0 @ 0xf0010,
> SMBIOS rev. 2.3 @ 0xf96b0 (58 entries)
> bios0: vendor American Megatrends Inc. version "S20A3A04" date 04/13/2004
> bios0: Quanta Computer Inc. S20A
> apm0 at bios0: Power Management spec V1.2
> apm0: AC on, battery charge unknown
> acpi at bios0 function 0x0 not configured
> pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf4630/160 (8 entries)
> pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 6300ESB LPC" rev 0x00)
> pcibios0: PCI bus #3 is the last bus
> bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1000 0xc9000/0x1000 0xca000/0x1000
> cpu0 at mainbus0
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82875P Host" rev 0x02
> ppb0 at pci0 dev 3 function 0 "Intel 82875P CSA" rev 0x02
> pci1 at ppb0 bus 1
> em0 at pci1 dev 1 function 0 "Intel PRO/1000CT (82547GI)" rev 0x00: irq 5,
> address 00:c0:9f:3e:f5:bf
> ppb1 at pci0 dev 28 function 0 "Intel 6300ESB PCIX" rev 0x02
> pci2 at ppb1 bus 2
> uhci0 at pci0 dev 29 function 0 "Intel 6300ESB USB" rev 0x02: irq 9
> uhci1 at pci0 dev 29 function 1 "Intel 6300ESB USB" rev 0x02: irq 11
> "Intel 6300ESB WDT" rev 0x02 at pci0 dev 29 function 4 not configured
> "Intel 6300ESB APIC" rev 0x02 at pci0 dev 29 function 5 not configured
> ehci0 at pci0 dev 29 function 7 "Intel 6300ESB USB" rev 0x02: irq 10
> ehci0: timed out waiting for BIOS
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> ppb2 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x0a
> pci3 at ppb2 bus 3
> em1 at pci3 dev 2 function 0 "Intel PRO/1000MT (82541GI)" rev 0x00: irq 3,
> address 00:c0:9f:3e:f5:c0
> vga1 at pci3 dev 14 function 0 "ATI Rage XL" rev 0x27
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> drm at vga1 unsupported
> ichpcib0 at pci0 dev 31 function 0 "Intel 6300ESB LPC" rev 0x02: 24-bit timer
> at 3579545Hz
> pciide0 at pci0 dev 31 function 2 "Intel 6300ESB SATA" rev 0x02: DMA, channel
> 0 configured to compatibility, channel 1 configured to compatibility
> atapiscsi0 at pciide0 channel 0 drive 0
> scsibus0 at atapiscsi0: 2 targets, initiator 7
> cd0 at scsibus0 targ 0 lun 0: ATAPI 5/cdrom removable
> cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
> wd0 at pciide0 channel 1 drive 1:
> wd0: 16-sector PIO, LBA48, 114473MB, 234441648 sectors
> wd0(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 5
> ichiic0 at pci0 dev 31 function 3 "Intel 6300ESB SMBus" rev 0x02: irq 9
> iic0 at ichiic0
> admcts0 at iic0 addr 0x2e
> spdmem0 at iic0 addr 0x52: 1GB DDR SDRAM non-parity PC3200CL3.0
> spdmem1 at iic0 addr 0x53: 1GB DDR SDRAM non-parity PC3200CL3.0
> usb1 at uhci0: USB revision 1.0
> uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb2 at uhci1: USB revision 1.0
> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> isa0 at ichpcib0
> isadma0 at isa0
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0:
> spkr0 at pcppi0
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> biomask ffc5 netmask ffed ttymask ffff
> mtrr: Pentium Pro MTRR support
> softraid0 at root
> root on wd0a swap on wd0b dump on wd0b
> WARNING: / was not properly unmounted
> #
>
>
> _________________________________________________________________
> Your E-mail and More On-the-Go. Get Windows Live Hotmail Free.
> http://clk.atdmt.com/GBL/go/196390709/direct/01/
