My MacBookPro with a recent snapshot works pretty good:
# sysctl hw.product
hw.product=MacBookPro2,2
# ifconfig athn0
athn0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:19:e3:d9:96:9b
priority: 4
groups: wlan egress
media: IEEE802.11 autoselect (OFDM54 mode 11g)
status: active
ieee80211: nwid YYYY chan 10 bssid 00:23:04:c9:7f:60 41dB wpapsk
0xXXXX wpaprotos wpa1,wpa2 wpaakms psk wpaciphers tkip,ccmp wpagroupcipher
tkip
inet6 fe80::219:e3ff:fed9:969b%athn0 prefixlen 64 scopeid 0x2
inet 192.0.2.160 netmask 0xffffff00 broadcast 192.0.2.255
(sometimes takes a couple of ifconfig up/down to wake up)
startx works perfectly at full resolution:
# grep -i xres /var/log/Xorg.0.log
XRes: 1440, YRes: 900, DotClock: 96310
/Pete
# cat /var/run/dmesg.boot
OpenBSD 4.6-current (GENERIC.MP) #391: Fri Jan 15 14:55:45 MST 2010
t...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Core(TM)2 CPU T7600 @ 2.33GHz ("GenuineIntel" 686-class) 2.33
GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,
xTPR
real mem = 2131234816 (2032MB)
avail mem = 2056310784 (1961MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 07/29/05, SMBIOS rev. 2.4 @ 0xe0000 (40
entries)
bios0: vendor Apple Inc. version "MBP22.88Z.00A5.B07.0708131242" date
08/13/07
bios0: Apple Computer, Inc. MacBookPro2,2
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP HPET APIC MCFG ASF! SBST ECDT SSDT SSDT SSDT
acpi0: wakeup devices ADP1(S3) LID0(S3) PXS1(S4) PXS2(S4) USB1(S3) USB2(S3)
USB3(S3) USB4(S3) USB7(S3) EC__(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 166MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 CPU T7600 @ 2.33GHz ("GenuineIntel" 686-class) 2.33
GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,
xTPR
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 1
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (PEGP)
acpiprt2 at acpi0: bus 2 (RP01)
acpiprt3 at acpi0: bus 3 (RP02)
acpiprt4 at acpi0: bus 4 (RP03)
acpiprt5 at acpi0: bus 12 (PCIB)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2, C1, PSS
acpicpu1 at acpi0: C3, C2, C1, PSS
acpiac0 at acpi0: AC unit online
acpibtn0 at acpi0: LID0
acpibtn1 at acpi0: PWRB
acpibtn2 at acpi0: SLPB
acpibat0 at acpi0: BAT0 model "14127832176087873" type 14127832377542988 oem
"14127833101004627"
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD01
acpivout1 at acpivideo0: DD02
acpivout2 at acpivideo0: DD03
acpivout3 at acpivideo0: DD04
acpivout4 at acpivideo0: DD05
bios0: ROM list: 0xc0000/0xfa00
cpu0: Enhanced SpeedStep 2328 MHz: speeds: 2333, 2167, 2000, 1833, 1667, 1500,
1333, 1000 MHz
memory map conflict 0x7ff00000/0x100000
memory map conflict 0xf00f8000/0x1000
memory map conflict 0xfed1c000/0x4000
memory map conflict 0xfffb0000/0x30000
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GM Host" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82945GM PCIE" rev 0x03: apic 1 int 16
(irq 11)
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Radeon Mobility X1600" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
radeondrm0 at vga1: apic 1 int 16 (irq 11)
drm0 at radeondrm0
vendor "Intel", unknown product 0x27a3 (class DASP subclass Time and
Frequency, rev 0x03) at pci0 dev 7 function 0 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: apic 1
int 22 (irq 10)
azalia0: codecs: Sigmatel STAC9220/1
audio0 at azalia0
ppb1 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 1 int 17
(irq 11)
pci2 at ppb1 bus 2
mskc0 at pci2 dev 0 function 0 "Marvell Yukon 88E8053" rev 0x22, Yukon-2 EC
rev. A3 (0x2): apic 1 int 16 (irq 11)
msk0 at mskc0 port A: address 00:17:f2:d8:f0:8d
eephy0 at msk0 phy 0: 88E1111 Gigabit PHY, rev. 2
ppb2 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 1 int 16
(irq 11)
pci3 at ppb2 bus 3
athn0 at pci3 dev 0 function 0 "Atheros AR5418" rev 0x01: apic 1 int 17 (irq
10), address 00:19:e3:d9:96:9b
athn0: MAC AR5418 rev 2, RF AR5133 (2T3R), ROM rev 4
ppb3 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02: apic 1 int 18
(irq 11)
pci4 at ppb3 bus 4
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 1 int 23
(irq 11)
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 1 int 19
(irq 11)
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 1 int 18
(irq 11)
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 1 int 16
(irq 11)
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 1 int 23
(irq 11)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci5 at ppb4 bus 12
"TI TSB82AA2 FireWire" rev 0x01 at pci5 dev 3 function 0 not configured
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x02: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, DVD-R UJ-857D, KCVB> ATAPI 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4
pciide0: channel 1 disabled (no drives)
pciide1 at pci0 dev 31 function 2 "Intel 82801GBM SATA" rev 0x02: DMA, channel
0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using apic 1 int 19 (irq 11) for native-PCI interrupt
wd0 at pciide1 channel 0 drive 1: <Hitachi HTS541616J9SA00>
wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd0(pciide1:0:1): using PIO mode 4, Ultra-DMA mode 6
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 1 int
19 (irq 11)
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
uvideo0 at uhub0 port 4 configuration 1 interface 0 "Apple Computer Bluetooth"
rev 2.00/1.10 addr 2
uhidev0 at uhub4 port 1 configuration 1 interface 0 "Apple Computer ADB
device" rev 2.00/19.65 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub4 port 1 configuration 1 interface 1 "Apple Computer ADB
device" rev 2.00/19.65 addr 2
uhidev1: iclass 3/1
ums0 at uhidev1: 5 buttons
wsmouse0 at ums0 mux 0
uhidev2 at uhub1 port 2 configuration 1 interface 0 "Apple Computer Apple
Internal Keyboard / Trackpad" rev 2.00/0.18 addr 2
uhidev2: iclass 3/1
ukbd1 at uhidev2: 8 modifier keys, 5 key codes, country code 13
wskbd1 at ukbd1 mux 1
wskbd1: connecting to wsdisplay0
uhidev3 at uhub1 port 2 configuration 1 interface 1 "Apple Computer Apple
Internal Keyboard / Trackpad" rev 2.00/0.18 addr 2
uhidev3: iclass 3/1, 5 report ids
ums1 at uhidev3 reportid 2: 3 buttons
wsmouse1 at ums1 mux 0
ums2 at uhidev3 reportid 5
ums2: mouse has no X report
uhidev4 at uhub1 port 2 configuration 1 interface 2 "Apple Computer Apple
Internal Keyboard / Trackpad" rev 2.00/0.18 addr 2
uhidev4: iclass 3/0
uhid0 at uhidev4: input=1, output=0, feature=0
uhidev5 at uhub3 port 2 configuration 1 interface 0 "Apple Computer, Inc. IR
Receiver" rev 2.00/1.10 addr 2
uhidev5: iclass 3/0, 38 report ids
uhid1 at uhidev5 reportid 36: input=4, output=0, feature=0
uhid2 at uhidev5 reportid 37: input=4, output=0, feature=0
uhid3 at uhidev5 reportid 38: input=4, output=0, feature=0
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
uvideo0: loadfirmware error=2!
#
On 18. jan. 2010, at 14.27, Owain Ainsworth wrote:
> On Sat, Jan 09, 2010 at 04:40:51PM -0800, James Hozier wrote:
>> My MacBook Pro's wireless doesn't work, which is a big thing for me...I
couldn't get X to work, either.
>
> Details (including dmesg and failed xorg.log) to myself and matthieu@
> please.
>
>
> Unless it is nvidia. In which case don't bother, the nv driver is bad
> black magic and not worth the pain.
>
> -0-
> --
> Who made the world I cannot tell;
> 'Tis made, and here am I in hell.
> My hand, though now my knuckles bleed,
> I never soiled with such a deed.
> -- A. E. Housman
