Hi Marco,
I just updated controller and disks firmware to the latest version
available.
The controller Dell SAS6IR does not have cache.
I tried the latest snapshot and this is the outcome:
# uname -a
OpenBSD test.my.domain 4.6 GENERIC.MP#385 i386
# dd if=/dev/zero of=/dev/rsd0d bs=1m count=100
100+0 records in
100+0 records out
104857600 bytes transferred in 10.451 secs (10033167 bytes/sec)
FreeBSD 8 is more or less twice faster.
Regarding the other two issues.
The Intel PRO/1000 QP still does not work.
I can install the amd64 version but then it freezes at boot just after
"softraid0 at root".
Bye
Andrea
On Thu, 14 Jan 2010 17:10:11 -0600, Marco Peereboom <sl...@peereboom.us>
wrote:
> I use tons of them without issues. Did you update all BIOS and
> firmwares on those things?
>
> You also really want to enable write cache on those disks hanging of
> mpi. dlg was working on a diff to enable that by default.
>
> On Thu, Jan 14, 2010 at 11:46:18PM +0100, Andrea Parazzini wrote:
>> We have some Dell R610 and they do not work very well with OpenBSD:
>> - very bad disk performance, perhaps the mpi(4) driver.
>> - the optional Intel PRO/1000 QP does not work well (see my previous
> post).
>> - amd64 version does not work.
>>
>> I have not tried the latest snapshots.
>>
>> Regards,
>> Andrea
OpenBSD 4.6-current (GENERIC.MP) #385: Mon Jan 11 23:33:41 MST 2010
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Xeon(R) CPU E5502 @ 1.87GHz ("GenuineIntel" 686-class) 1.87
GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
real mem = 3479375872 (3318MB)
avail mem = 3383427072 (3226MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 07/17/09, BIOS32 rev. 0 @ 0xfa1c0,
SMBIOS rev. 2.6 @ 0xcf79c000 (83 entries)
bios0: vendor Dell Inc. version "1.2.6" date 07/17/2009
bios0: Dell Inc. PowerEdge R610
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP APIC SPCR HPET DM__ MCFG WD__ SLIC ERST HEST BERT
EINJ SRAT TCPA SSDT
acpi0: wakeup devices PCI0(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 16 (boot processor)
cpu0: unknown i686 model 0x1a, can't get bus clock (0x0)
cpu0: apic clock running at 132MHz
cpu1 at mainbus0: apid 20 (application processor)
cpu1: Intel(R) Xeon(R) CPU E5502 @ 1.87GHz ("GenuineIntel" 686-class) 1.87
GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins
ioapic1 at mainbus0: apid 1 pa 0xfec80000, version 20, 24 pins
ioapic1: misconfigured as apic 0, remapped to apid 1
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (PEX1)
acpiprt2 at acpi0: bus 2 (PEX3)
acpiprt3 at acpi0: bus -1 (PEX4)
acpiprt4 at acpi0: bus -1 (PEX5)
acpiprt5 at acpi0: bus -1 (PEX6)
acpiprt6 at acpi0: bus 4 (PEX7)
acpiprt7 at acpi0: bus 8 (PEX9)
acpiprt8 at acpi0: bus -1 (PEXA)
acpiprt9 at acpi0: bus 3 (SBEX)
acpiprt10 at acpi0: bus 12 (COMP)
acpicpu0 at acpi0: C3, C1
acpicpu1 at acpi0: C3, C1
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x5c00 0xce000/0x1000!
0xec000/0x4000!
ipmi at mainbus0 not configured
cpu0: EST: PSS not yet available for this processor
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 5500 Host" rev 0x13
ppb0 at pci0 dev 1 function 0 "Intel X58 PCIE" rev 0x13
pci1 at ppb0 bus 1
bnx0 at pci1 dev 0 function 0 "Broadcom BCM5709" rev 0x20: apic 1 int 4
(irq 15)
bnx1 at pci1 dev 0 function 1 "Broadcom BCM5709" rev 0x20: apic 1 int 16
(irq 14)
ppb1 at pci0 dev 3 function 0 "Intel X58 PCIE" rev 0x13
pci2 at ppb1 bus 2
bnx2 at pci2 dev 0 function 0 "Broadcom BCM5709" rev 0x20: apic 1 int 0
(irq 15)
bnx3 at pci2 dev 0 function 1 "Broadcom BCM5709" rev 0x20: apic 1 int 10
(irq 14)
ppb2 at pci0 dev 7 function 0 "Intel X58 PCIE" rev 0x13: apic 1 int 21 (irq
0)
pci3 at ppb2 bus 4
ppb3 at pci3 dev 0 function 0 "IDT 89HPES12N3A" rev 0x0e
pci4 at ppb3 bus 5
ppb4 at pci4 dev 2 function 0 "IDT 89HPES12N3A" rev 0x0e
pci5 at ppb4 bus 6
em0 at pci5 dev 0 function 0 "Intel PRO/1000 QP (82575GB)" rev 0x02: apic 1
int 15 (irq 11), address 00:1b:21:3f:2a:70
em1 at pci5 dev 0 function 1 "Intel PRO/1000 QP (82575GB)" rev 0x02: apic 1
int 14 (irq 10), address 00:1b:21:3f:2a:71
ppb5 at pci4 dev 4 function 0 "IDT 89HPES12N3A" rev 0x0e
pci6 at ppb5 bus 7
em2 at pci6 dev 0 function 0 "Intel PRO/1000 QP (82575GB)" rev 0x02: apic 1
int 6 (irq 15), address 00:1b:21:3f:2a:74
em3 at pci6 dev 0 function 1 "Intel PRO/1000 QP (82575GB)" rev 0x02: apic 1
int 13 (irq 14), address 00:1b:21:3f:2a:75
ppb6 at pci0 dev 9 function 0 "Intel X58 PCIE" rev 0x13: apic 1 int 21 (irq
0)
pci7 at ppb6 bus 8
ppb7 at pci7 dev 0 function 0 "IDT 89HPES12N3A" rev 0x0e
pci8 at ppb7 bus 9
ppb8 at pci8 dev 2 function 0 "IDT 89HPES12N3A" rev 0x0e
pci9 at ppb8 bus 10
em4 at pci9 dev 0 function 0 "Intel PRO/1000 QP (82575GB)" rev 0x02: apic 1
int 23 (irq 11), address 00:1b:21:3f:19:38
em5 at pci9 dev 0 function 1 "Intel PRO/1000 QP (82575GB)" rev 0x02: apic 1
int 17 (irq 10), address 00:1b:21:3f:19:39
ppb9 at pci8 dev 4 function 0 "IDT 89HPES12N3A" rev 0x0e
pci10 at ppb9 bus 11
em6 at pci10 dev 0 function 0 "Intel PRO/1000 QP (82575GB)" rev 0x02: apic
1 int 8 (irq 15), address 00:1b:21:3f:19:3c
em7 at pci10 dev 0 function 1 "Intel PRO/1000 QP (82575GB)" rev 0x02: apic
1 int 18 (irq 14), address 00:1b:21:3f:19:3d
"Intel X58 Misc" rev 0x13 at pci0 dev 20 function 0 not configured
"Intel X58 GPIO" rev 0x13 at pci0 dev 20 function 1 not configured
"Intel X58 RAS" rev 0x13 at pci0 dev 20 function 2 not configured
uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x02: apic 0 int 17
(irq 14)
uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x02: apic 0 int 18
(irq 11)
ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x02: apic 0 int 19
(irq 10)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb10 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x02
pci11 at ppb10 bus 3
mpi0 at pci11 dev 0 function 0 "Symbios Logic SAS1068E" rev 0x08: apic 0
int 16 (irq 15)
scsibus0 at mpi0: 112 targets
sd0 at scsibus0 targ 0 lun 0: <Dell, VIRTUAL DISK, 1028> SCSI3 0/direct
fixed
sd0: 285568MB, 512 bytes/sec, 584843264 sec total
ses0 at scsibus0 targ 8 lun 0: <DP, BACKPLANE, 1.07> SCSI3 13/enclosure
services fixed
uhci2 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x02: apic 0 int 21
(irq 6)
uhci3 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x02: apic 0 int 20
(irq 5)
ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x02: apic 0 int 21
(irq 6)
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb11 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x92
pci12 at ppb11 bus 12
vga1 at pci12 dev 3 function 0 "Matrox MGA G200eW" rev 0x0a
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ichpcib0 at pci0 dev 31 function 0 "Intel 82801IB LPC" rev 0x02: PM
disabled
pciide0 at pci0 dev 31 function 2 "Intel 82801I SATA" rev 0x02: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using apic 0 int 23 (irq 14) for native-PCI interrupt
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
uhub6 at uhub0 port 3 "Standard Microsystems product 0x2514" rev 2.00/0.00
addr 2
umass0 at uhub1 port 3 configuration 1 interface 0 "Avocent USB Composite
Device-1" rev 2.00/0.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd1 at scsibus1 targ 1 lun 0: <iDRAC, LCDRIVE, 0323> SCSI0 0/direct
removable
sd1: drive offline
umass1 at uhub1 port 3 configuration 1 interface 1 "Avocent USB Composite
Device-1" rev 2.00/0.00 addr 2
umass1: using SCSI over Bulk-Only
scsibus2 at umass1: 2 targets, initiator 0
cd0 at scsibus2 targ 1 lun 0: <iDRAC, Virtual CD, 0323> SCSI0 5/cdrom
removable
sd2 at scsibus2 targ 1 lun 1: <iDRAC, Virtual Floppy, 0323> SCSI0 0/direct
removable
sd2: drive offline
uhidev0 at uhub4 port 2 configuration 1 interface 0 "Avocent USB Composite
Device-0" rev 1.10/0.00 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub4 port 2 configuration 1 interface 1 "Avocent USB Composite
Device-0" rev 1.10/0.00 addr 2
uhidev1: iclass 3/1
ums0 at uhidev1: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
cpu1: unknown i686 model 0x1a, can't get bus clock (0x0)
bnx0: address 00:22:19:5d:b4:c4
brgphy0 at bnx0 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
bnx1: address 00:22:19:5d:b4:c6
brgphy1 at bnx1 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
bnx2: address 00:22:19:5d:b4:c8
brgphy2 at bnx2 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
bnx3: address 00:22:19:5d:b4:ca
brgphy3 at bnx3 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
