2010/1/12 FRLinux <frli...@gmail.com>: > On Tue, Jan 12, 2010 at 6:05 PM, Marcin <mig...@gmail.com> wrote: >> However, it hangs later on just after printing out following lines: >> >> pci0 at mainbus0 bus 0: configuration mode 1 (bios) >> mem address conflict 0xff000000/0x1000 >> pchb0 at pci0 dev 0 function 0 "Intel E7520 Host" rev 0x0c >> "Intel E7520 Error Reporting" rev 0x0c at pci0 dev 0 function 1 not >> configured >> ppb0 at pci0 dev 2 function 0 "Intel E7520 PCIE" rev 0x0c > > Yup, same error here, precisely at that line. > > Just to confirm that we have the same issue, can you try disabling > ppb* on boot -c then see if it goes to the login prompt? >
Was even worse for me here, as although disabling ppb* makes the kernel go slightly further, it has a nasty side effect of disabling scsi controllerl. However, I have just checked out and compiled -current and can confirm the issue is gone - machine booted and all network interfaces are accessible. Many thanks to everyone involved in fixing that! Regards, Marcin
