Pawlowski Marcin Piotr wrote:
Hi,
could someone give me a hint about what is going on with my broadband
module and fingerprint reader. Thing is that when I'm booting amd64
kernel I have:
ugen0 at uhub3 port 1 "AuthenTec Fingerprint Sensor" rev 2.00/17.03 addr 2
and when I'm booting i386 kernel I have:
ugen0 at uhub0 port 2 "HP un2400 Mobile Broadband Module HP un2400
Mobile Broadband Module" rev 2.00/0.01 addr 2
It's interesting that they are somehow "mutually exclusive", meaning the
first one is not detected by i386 kernel and the second one by amd64
kernel.
Any hints?
I've found a clue while I was playing with debugging kernel:
uhub0: port 1, device disappeared after reset
I don't know yet if its fault of uhub or something else (pci?).
Any advice would be appreciated...
Cheers,
pmp
OpenBSD 4.6-current (DEBUG) #4: Fri Jan 8 21:19:50 CET 2010
p...@amnesiac:/usr/src/sys/arch/amd64/compile/DEBUG
real mem = 2004357120 (1911MB)
avail mem = 1941528576 (1851MB)
RTC BIOS diagnostic error e3<clock_battery,ROM_cksum,config_unit>
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0x77ac4000 (22 entries)
bios0: vendor Hewlett-Packard version "68PSU Ver. F.0E" date 09/14/2009
bios0: Hewlett-Packard HP EliteBook 2530p (FU435EA#ABB)
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP HPET APIC MCFG TCPA SSDT SLIC DMAR ASF! SSDT SSDT SSDT
acpi0: wakeup devices LANC(S0) HDEF(S4) RP02(S5) WNIC(S5) RP03(S5) ECF0(S5)
RP05(S5) ECF0(S5) RP06(S0) NIC_(S0) USB1(S0) USB2(S0) USB3(S0) USB4(S0)
USB5(S0) USB6(S0) U6RM(S0) EHC1(S0) EHC2(S0) PCIB(S5) HST1(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 Duo CPU L9400 @ 1.86GHz, 1862.33 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,CX16,xTPR,NXE,LONG
cpu0: 6MB 64b/line 16-way L2 cache
cpu0: apic clock running at 266MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 Duo CPU L9400 @ 1.86GHz, 1862.00 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,CX16,xTPR,NXE,LONG
cpu1: 6MB 64b/line 16-way L2 cache
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 1
acpiprt0 at acpi0: bus -1 (PEGP)
acpiprt1 at acpi0: bus 1 (RP01)
acpiprt2 at acpi0: bus 2 (RP02)
acpiprt3 at acpi0: bus 3 (RP03)
acpiprt4 at acpi0: bus 68 (PCIB)
acpiprt5 at acpi0: bus 0 (PCI0)
acpiec at acpi0 not configured
acpicpu0 at acpi0: C3, C2, C1, PSS
acpicpu1 at acpi0: C3, C2, C1, PSS
acpipwrres0 at acpi0: APPR
acpipwrres1 at acpi0: COMP
acpipwrres2 at acpi0: LPP_
acpitz0 at acpi0: critical temperature 105 degC
acpitz1 at acpi0: critical temperature 110 degC
acpitz2 at acpi0: critical temperature 110 degC
acpitz3 at acpi0: critical temperature 90 degC
acpitz4 at acpi0: critical temperature 105 degC
acpibat0 at acpi0: BAT0 not present
acpibat1 at acpi0: BAT1 not present
acpiac0 at acpi0: AC unit online
acpibtn0 at acpi0: SLPB
acpibtn1 at acpi0: LID_
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD02
cpu0: Enhanced SpeedStep 1862 MHz: speeds: 1867, 1866, 1600, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07
vga1 at pci0 dev 2 function 0 "Intel GM45 Video" rev 0x07
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0x80000000, size 0x10000000
inteldrm0 at vga1: apic 1 int 16 (irq 10)
drm0 at inteldrm0
"Intel GM45 Video" rev 0x07 at pci0 dev 2 function 1 not configured
"Intel GM45 HECI" rev 0x07 at pci0 dev 3 function 0 not configured
pciide0 at pci0 dev 3 function 2 "Intel GM45 PT IDER" rev 0x07: DMA
(unsupported), channel 0 wired to native-PCI, channel 1 wired to native-PCI
pciide0: using apic 1 int 18 (irq 11) for native-PCI interrupt
pciide0: channel 0 ignored (not responding; disabled or no drives?)
pciide0: channel 1 ignored (not responding; disabled or no drives?)
"Intel GM45 AMT SOL" rev 0x07 at pci0 dev 3 function 3 not configured
em0 at pci0 dev 25 function 0 "Intel ICH9 IGP M AMT" rev 0x03: apic 1 int 22
(irq 10), address 00:23:5a:35:25:ca
uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 16 (irq
10)
uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 17 (irq
10)
uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 18 (irq
11)
ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 19 (irq
10)
usb0 at ehci0: USB revision 2.0
uhub_match, dd=0xffff8000001ac758
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
uhub_attach
usb_init_hub: getting hub descriptor
uhub0: 6 ports with 6 removable, self powered
usbhub_init_hub: selfpowered=1, parent=0x0, parent->selfpowered=0
usb_init_port: turn on port 1 power
usb_init_port: turn on port 2 power
usb_init_port: turn on port 3 power
usb_init_port: turn on port 4 power
usb_init_port: turn on port 5 power
usb_init_port: turn on port 6 power
azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: apic 1 int
17 (irq 10)
azalia0: codecs: Analog Devices AD1984A
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: apic 1 int 16 (irq
10)
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: apic 1 int 17 (irq
10)
pci2 at ppb1 bus 2
iwn0 at pci2 dev 0 function 0 "Intel WiFi Link 5100" rev 0x00: apic 1 int 17
(irq 10), MIMO 1T2R, MoW, address 00:22:fa:53:eb:28
ppb2 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x03: apic 1 int 18 (irq
11)
pci3 at ppb2 bus 3
uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 20 (irq
10)
uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 22 (irq
10)
uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 18 (irq
11)
ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 20 (irq
10)
usb1 at ehci1: USB revision 2.0
uhub_match, dd=0xffff8000001bbe58
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
uhub_attach
usb_init_hub: getting hub descriptor
uhub1: 6 ports with 6 removable, self powered
usbhub_init_hub: selfpowered=1, parent=0x0, parent->selfpowered=0
usb_init_port: turn on port 1 power
usb_init_port: turn on port 2 power
usb_init_port: turn on port 3 power
usb_init_port: turn on port 4 power
usb_init_port: turn on port 5 power
usb_init_port: turn on port 6 power
ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93
pci4 at ppb3 bus 68
sdhc0 at pci4 dev 6 function 0 "Ricoh 5C822 SD/MMC" rev 0x22: apic 1 int 22
(irq 10)
sdmmc0 at sdhc0
"Ricoh 5C843 MMC" rev 0x12 at pci4 dev 6 function 1 not configured
pcib0 at pci0 dev 31 function 0 "Intel 82801IEM LPC" rev 0x03
ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: apic 1 int 21
(irq 10), AHCI 1.2
ahci0: PHY offline on port 0
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 1 lun 0: <ATA, Hitachi HTS54322, FBEO> SCSI3 0/direct fixed
sd0: 238475MB, 512 bytes/sec, 488397168 sec total
usb2 at uhci0: USB revision 1.0
uhub_match, dd=0xffff8000001db658
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
uhub_attach
usb_init_hub: getting hub descriptor
uhub2: 2 ports with 2 removable, self powered
usbhub_init_hub: selfpowered=1, parent=0x0, parent->selfpowered=0
usb_init_port: turn on port 1 power
usb_init_port: turn on port 2 power
usb3 at uhci1: USB revision 1.0
uhub_match, dd=0xffff8000001db258
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
uhub_attach
usb_init_hub: getting hub descriptor
uhub3: 2 ports with 2 removable, self powered
usbhub_init_hub: selfpowered=1, parent=0x0, parent->selfpowered=0
usb_init_port: turn on port 1 power
usb_init_port: turn on port 2 power
usb4 at uhci2: USB revision 1.0
uhub_match, dd=0xffff8000001eae58
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
uhub_attach
usb_init_hub: getting hub descriptor
uhub4: 2 ports with 2 removable, self powered
usbhub_init_hub: selfpowered=1, parent=0x0, parent->selfpowered=0
usb_init_port: turn on port 1 power
usb_init_port: turn on port 2 power
usb5 at uhci3: USB revision 1.0
uhub_match, dd=0xffff8000001eaa58
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
uhub_attach
usb_init_hub: getting hub descriptor
uhub5: 2 ports with 2 removable, self powered
usbhub_init_hub: selfpowered=1, parent=0x0, parent->selfpowered=0
usb_init_port: turn on port 1 power
usb_init_port: turn on port 2 power
usb6 at uhci4: USB revision 1.0
uhub_match, dd=0xffff8000001ea658
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
uhub_attach
usb_init_hub: getting hub descriptor
uhub6: 2 ports with 2 removable, self powered
usbhub_init_hub: selfpowered=1, parent=0x0, parent->selfpowered=0
usb_init_port: turn on port 1 power
usb_init_port: turn on port 2 power
usb7 at uhci5: USB revision 1.0
uhub_match, dd=0xffff8000001ea258
uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
uhub_attach
usb_init_hub: getting hub descriptor
uhub7: 2 ports with 2 removable, self powered
usbhub_init_hub: selfpowered=1, parent=0x0, parent->selfpowered=0
usb_init_port: turn on port 1 power
usb_init_port: turn on port 2 power
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
uhub_intr: sc=0xffff8000001d3700
mtrr: Pentium Pro MTRR support
uhub_explore dev=0xffff8000001ac700 addr=1
uhub_explore: uhub0 port 1 status 0x0501 0x0001
uhub_explore: status change hub=1 port=1
uhub_explore dev=0xffff8000001bbe00 addr=1
uhub_explore: uhub1 port 1 status 0x0500 0x0000
uhub_explore: port=1 !C_CONNECT_STATUS
uhub_explore: uhub1 port 2 status 0x0500 0x0000
uhub_explore: port=2 !C_CONNECT_STATUS
uhub0: port 1, device disappeared after reset
uhub_explore: uhub1 port 3 status 0x0500 0x0000
uhub_explore: port=3 !C_CONNECT_STATUS
uhub_explore: uhub1 port 4 status 0x0500 0x0000
uhub_explore: port=4 !C_CONNECT_STATUS
uhub_explore: uhub1 port 5 status 0x0500 0x0000
uhub_explore: port=5 !C_CONNECT_STATUS
uhub_explore: uhub1 port 6 status 0x0500 0x0000
uhub_explore: port=6 !C_CONNECT_STATUS
uhub_intr: sc=0xffff8000001d3700
uhub_explore: uhub0 port 2 status 0x0500 0x0000
uhub_explore: port=2 !C_CONNECT_STATUS
uhub_explore: uhub0 port 3 status 0x0500 0x0000
uhub_explore: port=3 !C_CONNECT_STATUS
uhub_explore: uhub0 port 4 status 0x0500 0x0000
uhub_explore: port=4 !C_CONNECT_STATUS
uhub_explore: uhub0 port 5 status 0x0501 0x0001
uhub_explore: status change hub=1 port=5
uhub_intr: sc=0xffff8000001e5b00
uhub_intr: sc=0xffff8000001e5b00
uhub_intr: sc=0xffff8000001e5b00
uhub_intr: sc=0xffff8000001e5b00
uhub_match, dd=0xffff80000020b958
uhub_match, dd=0xffff80000020b958
uvideo0 at uhub0 port 5 configuration 1 interface 0 "Chicony Electronics Co., Ltd.
CKA7227" rev 2.00/32.18 addr 2
video0 at uvideo0
uhub_match, dd=0xffff80000020b958
uhub_explore: uhub0 port 6 status 0x0500 0x0000
uhub_explore: port=6 !C_CONNECT_STATUS
uhub_explore dev=0xffff8000001ac700 addr=1
uhub_explore: uhub0 port 1 status 0x0500 0x0001
uhub_explore: status change hub=1 port=1
uhub_explore: port=1 !CURRENT_CONNECT_STATUS
uhub_explore: uhub0 port 2 status 0x0500 0x0000
uhub_explore: port=2 !C_CONNECT_STATUS
uhub_explore: uhub0 port 3 status 0x0500 0x0000
uhub_explore: port=3 !C_CONNECT_STATUS
uhub_explore: uhub0 port 4 status 0x0500 0x0000
uhub_explore: port=4 !C_CONNECT_STATUS
uhub_explore: uhub0 port 5 status 0x0503 0x0000
uhub_explore: port=5 !C_CONNECT_STATUS
uhub_explore: uhub0 port 6 status 0x0500 0x0000
uhub_explore: port=6 !C_CONNECT_STATUS
uhub_explore dev=0xffff8000001db600 addr=1
uhub_explore: uhub2 port 1 status 0x0101 0x0001
uhub_explore: status change hub=1 port=1
uhub_explore dev=0xffff8000001eae00 addr=1
uhub_explore: uhub4 port 1 status 0x0100 0x0000
uhub_explore: port=1 !C_CONNECT_STATUS
uhub_explore: uhub4 port 2 status 0x0100 0x0000
uhub_explore: port=2 !C_CONNECT_STATUS
uhub_explore dev=0xffff8000001ea600 addr=1
uhub_explore: uhub6 port 1 status 0x0100 0x0000
uhub_explore: port=1 !C_CONNECT_STATUS
uhub_explore: uhub6 port 2 status 0x0100 0x0000
uhub_explore: port=2 !C_CONNECT_STATUS
uhub_explore dev=0xffff8000001eaa00 addr=1
uhub_explore: uhub5 port 1 status 0x0100 0x0000
uhub_explore: port=1 !C_CONNECT_STATUS
uhub_explore: uhub5 port 2 status 0x0100 0x0000
uhub_explore: port=2 !C_CONNECT_STATUS
uhub_explore dev=0xffff8000001db200 addr=1
uhub_explore: uhub3 port 1 status 0x0100 0x0000
uhub_explore: port=1 !C_CONNECT_STATUS
uhub_explore: uhub3 port 2 status 0x0100 0x0000
uhub_explore: port=2 !C_CONNECT_STATUS
uhub_explore dev=0xffff8000001ea200 addr=1
uhub_explore: uhub7 port 1 status 0x0100 0x0000
uhub_explore: port=1 !C_CONNECT_STATUS
uhub_explore: uhub7 port 2 status 0x0100 0x0000
uhub_explore: port=2 !C_CONNECT_STATUS
uhub_match, dd=0xffff80000028f558
ubt0 at uhub2 port 1 "Broadcom Corp HP Integrated Module" rev 2.00/1.00 addr 2
uhub_explore: uhub2 port 2 status 0x0100 0x0000
uhub_explore: port=2 !C_CONNECT_STATUS
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
