When using "mount -t udf /dev/svnd0a /mnt/svnd0" or
"mount_udf /dev/svnd0a /mnt/svnd0" after successfully
configuring with vnconfig I get: "mount_udf: mount: Invalid argument".
I have read the man pages, I have Googled, yet no information
exists that explains why I can mount a disk image with a udf file system.
Any ideas?
My DMESG:
OpenBSD 4.4 (GENERIC) #1021: Tue Aug 12 17:16:55 MDT 2008
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) 4 CPU 2.53GHz ("GenuineIntel" 686-class) 2.55 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID
real mem = 1064898560 (1015MB)
avail mem = 1021267968 (973MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 01/08/03, BIOS32 rev. 0 @
0xf1040, SMBIOS rev. 2.3 @ 0xf2fb0 (41 entries)
bios0: vendor Award Software, Inc. version "ACPI BIOS Revision 1001"
date 01/08/2003
bios0: Sony Corporation PCV-RS220(UC)
apm0 at bios0: Power Management spec V1.2 (BIOS management disabled)
apm0: APM power management enable: unrecognized device ID (9)
apm0: APM engage (device 1): power management disabled (1)
apm0: AC on, battery charge unknown
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x1692
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf15e0/176 (9 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xb200!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82845G Host" rev 0x01
vga1 at pci0 dev 2 function 0 "Intel 82845G Video" rev 0x01
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
agp0 at vga1: aperture at 0xf0000000, size 0x8000000
drm at vga1 unsupported
uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x01: irq 11
uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x01: irq 5
uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x01: irq 3
ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x01: irq 9
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb0 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x81
pci1 at ppb0 bus 1
rl0 at pci1 dev 13 function 0 "Realtek 8139" rev 0x10: irq 9, address
00:0c:6e:27:2d:ad
rlphy0 at rl0 phy 0: RTL internal PHY
"NEC Firewire" rev 0x01 at pci1 dev 14 function 0 not configured
ichpcib0 at pci0 dev 31 function 0 "Intel 82801DB LPC" rev 0x01:
24-bit timer at 3579545Hz
pciide0 at pci0 dev 31 function 1 "Intel 82801DB IDE" rev 0x01: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
wd0 at pciide0 channel 0 drive 0: <ST3120023A>
wd0: 16-sector PIO, LBA, 114473MB, 234441648 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets, initiator 7
cd0 at scsibus0 targ 0 lun 0: <TOSHIBA, DVD-ROM SD-R5002, 1S33> ATAPI
5/cdrom removable
atapiscsi1 at pciide0 channel 1 drive 1
scsibus1 at atapiscsi1: 2 targets, initiator 7
cd1 at scsibus1 targ 0 lun 0: <ASUS, CD-S400/A, 2.2N> ATAPI 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
cd1(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x01: irq
10, ICH4 AC97
ac97: codec id 0x414c4720 (Avance Logic ALC650)
ac97: codec features 20 bit DAC, 18 bit ADC, Realtek 3D
audio0 at auich0
"Intel 82801DB Modem" rev 0x01 at pci0 dev 31 function 6 not configured
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask eb6d netmask eb6d ttymask fbff
mtrr: Pentium Pro MTRR support
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
auich0: measured ac97 link rate at 48011 Hz, will use 48000 Hz
udf_mount: enforcing read-only mode
FSD does not lie within the partition!
udf_mount: enforcing read-only mode
FSD does not lie within the partition!
udf_mount: enforcing read-only mode
FSD does not lie within the partition!
udf_mount: enforcing read-only mode
FSD does not lie within the partition!
FSD does not lie within the partition!
FSD does not lie within the partition!
FSD does not lie within the partition!
FSD does not lie within the partition!
FSD does not lie within the partition!
My fstab entries:
/dev/wd0a / ffs rw 1 1
/dev/wd0g /home ffs rw,nodev,nosuid 1 2
/dev/wd0d /tmp ffs rw,nodev,nosuid 1 2
/dev/wd0f /usr ffs rw,nodev 1 2
/dev/wd0e /var ffs rw,nodev,nosuid 1 2
/dev/fd0c /mnt/floppy msdos rw,noauto 0 0
/dev/cd0a /mnt/cdrom1 cd9660 ro,noauto 0 0
/dev/cd1a /mnt/cdrom2 cd9660 ro,noauto 0 0
/dev/sd0i /mnt/usbdevicea msdos rw,noauto 0 0
/dev/sd1i /mnt/usbdeviceb msdos rw,noauto 0 0
/dev/sd2i /mnt/usbdevicec msdos rw,noauto 0 0
/dev/sd3i /mnt/usbdeviced msdos rw,noauto 0 0
/dev/sd4i /mnt/usbdevicee msdos rw,noauto 0 0
/dev/sd5i /mnt/usbdevicef msdos rw,noauto 0 0
/dev/sd6i /mnt/usbdeviceg msdos rw,noauto 0 0
/dev/svnd0a /mnt/svnd0 udf rw,noauto 0 0
/dev/svnd1a /mnt/svnd1 udf rw,noauto 0 0
/dev/svnd2a /mnt/svnd2 udf rw,noauto 0 0
/dev/svnd3a /mnt/svnd3 udf rw,noauto 0 0
The last four entries I changed from the following:
/dev/svnd0a /mnt/svnd0 ffs rw,noauto 0 0
/dev/svnd1a /mnt/svnd1 cd9660 rw,noauto 0 0
/dev/svnd2a /mnt/svnd2 ffs rw,noauto 0 0
/dev/svnd3a /mnt/svnd3 ffs rw,noauto 0 0
Either way, and even mounting to a different
directory all together, it still doesn't work.
