Probably a bit premature to be asking this since I won't be able to physically
access the machine until Monday, but here goes ...
I have a machine that I admin remotely running 4.6 with all the patches. It's
a firewall only machine with 6 ethernet interfaces, 4 of which are active,
and has been running fine since I upgraded it. It's got a fairly complex
pf.conf. Last week I set up a VPN on it to a Sonic Wall appliance. The VPN
comes up and works fine, and then somewhere between 4 and 24 hours later the
box loses all network connectivity. You can still login via console, and I've
been able to get the local people to run some basic commands (ifconfig,
netstat, ps, pfctl -s) and everything seems normal (from what I can get from
non-technical people over the phone), but none of the interfaces are passing
packets. Rebooting solves the problem for the next 4-24 hrs. It's happened
several times now. System logs show nothing.
Any ideas as to what is going on would be greatly appreciated. And especially,
what should I be looking for (i.e. what commands should I run) if I can
manage to get on the box when the network is hosed?
Thanks for any help. Here's a dmesg for the machine in question:
OpenBSD 4.6-stable (GENERIC.MP) #0: Mon Dec 7 17:59:54 PST 2009
*****************************:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Pentium(R) 4 CPU 3.00GHz ("GenuineIntel" 686-class) 3 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,CNXT-ID,xTPR
real mem = 535261184 (510MB)
avail mem = 508735488 (485MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 06/12/06, BIOS32 rev. 0 @ 0xfb6d0,
SMBIOS rev. 2.3 @ 0xf0800 (41 entries)
bios0: vendor Phoenix Technologies, LTD version "6.00 PG" date 06/12/2006
bios0: Supermicro P4SC8
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP APIC
acpi0: wakeup devices CSAD(S5) HUB0(S5) HRB_(S5) UAR1(S5) UAR2(S5) USB0(S1)
USB1(S1) USBE(S1) MODM(S5) PCI0(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 199MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Pentium(R) 4 CPU 3.00GHz ("GenuineIntel" 686-class) 3 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,CNXT-ID,xTPR
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 2
ioapic1 at mainbus0: apid 3 pa 0xfec10000, version 20, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (CSAB)
acpiprt2 at acpi0: bus 4 (HUB0)
acpiprt3 at acpi0: bus 2 (HRB_)
acpicpu0 at acpi0
acpicpu1 at acpi0
acpitz0 at acpi0acpitz0: THRM: failed to read _TMP
: failed to read _TMP
acpibtn0 at acpi0: PWRB
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1000 0xc9000/0x1000
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82875P Host" rev 0x02
ppb0 at pci0 dev 3 function 0 "Intel 82875P CSA" rev 0x02
pci1 at ppb0 bus 1
em0 at pci1 dev 1 function 0 "Intel PRO/1000CT (82547GI)" rev 0x00: apic 2 int
18 (irq 11), address 00:30:48:8f:b0:0e
ppb1 at pci0 dev 28 function 0 "Intel 6300ESB PCIX" rev 0x02
pci2 at ppb1 bus 2
ppb2 at pci2 dev 1 function 0 "Pericom PI7C21P100 PCIX-PCIX" rev 0x01
pci3 at ppb2 bus 3
em1 at pci3 dev 4 function 0 "Intel PRO/1000MT QP (82546GB)" rev 0x03: apic 3
int 0 (irq 9), address 00:0e:0c:c2:33:1c
em2 at pci3 dev 4 function 1 "Intel PRO/1000MT QP (82546GB)" rev 0x03: apic 3
int 1 (irq 9), address 00:0e:0c:c2:33:1d
em3 at pci3 dev 6 function 0 "Intel PRO/1000MT QP (82546GB)" rev 0x03: apic 3
int 2 (irq 9), address 00:0e:0c:c2:33:1e
em4 at pci3 dev 6 function 1 "Intel PRO/1000MT QP (82546GB)" rev 0x03: apic 3
int 3 (irq 9), address 00:0e:0c:c2:33:1f
uhci0 at pci0 dev 29 function 0 "Intel 6300ESB USB" rev 0x02: apic 2 int 16
(irq 10)
uhci1 at pci0 dev 29 function 1 "Intel 6300ESB USB" rev 0x02: apic 2 int 19
(irq 5)
"Intel 6300ESB WDT" rev 0x02 at pci0 dev 29 function 4 not configured
"Intel 6300ESB APIC" rev 0x02 at pci0 dev 29 function 5 not configured
ehci0 at pci0 dev 29 function 7 "Intel 6300ESB USB" rev 0x02: apic 2 int 23
(irq 11)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x0a
pci4 at ppb3 bus 4
vga1 at pci4 dev 9 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
em5 at pci4 dev 10 function 0 "Intel PRO/1000MT (82541GI)" rev 0x00: apic 2
int 19 (irq 5), address 00:30:48:8f:b0:0f
ichpcib0 at pci0 dev 31 function 0 "Intel 6300ESB LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 6300ESB IDE" rev 0x02: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <WDC WD800JB-00JJC0>
wd0: 16-sector PIO, LBA, 76319MB, 156301488 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <SONY, CD-RW CRX850E, 5YK3> ATAPI 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
pciide1 at pci0 dev 31 function 2 "Intel 6300ESB SATA" rev 0x02: DMA, channel
0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using apic 2 int 18 (irq 11) for native-PCI interrupt
ichiic0 at pci0 dev 31 function 3 "Intel 6300ESB SMBus" rev 0x02: apic 2 int
17 (irq 9)
iic0 at ichiic0
lm1 at iic0 addr 0x2d: W83627HF
spdmem0 at iic0 addr 0x50: 512MB DDR SDRAM non-parity PC2100CL2.5
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
wbsio0 at isa0 port 0x2e/2: W83627HF rev 0x41
lm2 at wbsio0 port 0x290/8: W83627HF
lm1 detached
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
mtrr: Pentium Pro MTRR support
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
--
Jeff Simmons jsimm...@goblin.punk.net
Simmons Consulting - Network Engineering, Administration, Security
"You guys, I don't hear any noise. Are you sure you're doing it right?"
-- My Life With The Thrill Kill Kult
