I any old computers on the openbsd 4.6 stable, I disabled the acpi on bios
2009/12/15 Tomas Bodzar <tomas.bod...@gmail.com> > ugh what's that? > > OpenBSD 4.6-current (DIRAC.MP) #13: Sun Mar 6 14:18:33 CET 2005 > r...@dirac.in.chemnet:/usr/src/sys/arch/i386/compile/DIRAC.MP > > you have custom kernel? Then show this error on GENERIC or GENERIC.MP ;-) > > See http://www.openbsd.org/faq/faq5.html#Why > > On Tue, Dec 15, 2009 at 1:19 PM, Peter Huncar <hu...@hunci.sk> wrote: > > Hello > > > > It crashes every time after reboot just after sync with: > > > > syncing disks... done > > uvm_fault(0xd08aa620, 0xefffa000, 0, 1) -> d > > fatal page fault (6) in supervisor mode > > trap type 6 code 0 eip efffaabb cs 8 eflags 10286 cr2 efffaabb cpl d0 > > panic: trap type 6, code=0, pc=efffaabb > > Starting stack trace... > > panic(d08600f8,0,de15ad9c,0,d8a5ac6c) at panic+0x65 > > panic(d077b327,6,0,efffaabb,d2c90800) at panic+0x65 > > trap() at trap+0x11d > > --- trap (number 6) --- > > end(d8535d20,d2c90800,5280200,1456db) at 0xefffaabb > > ciss_done(ddfbf000,ddf32000,44,6) at ciss_done+0x111 > > ciss_cmd(ddfbf000,1,3,ddfbf058,d0860050) at ciss_cmd+0x26c > > ciss_sync(d2c3fa00,1fc7b60f,0,1456db) at ciss_sync+0xa4 > > dohooks(d085fd44,1,de15af00,d04c7f9c,d097fc60) at dohooks+0x6b > > boot(0,1,de15af20,d0379970,d085ecf4) at boot+0x67 > > sys_reboot(d8a5ac6c,de15af68,de15af58,d8a5ac6c) at sys_reboot+0x55 > > syscall() at syscall+0x12b > > --- syscall (number 55) --- > > > > OS setting set to Linux > > APIC map to APIC Full Table > > > > dmesg: > > OpenBSD 4.6-current (DIRAC.MP) #13: Sun Mar B 6 14:18:33 CET 2005 > > B r...@dirac.in.chemnet:/usr/src/sys/arch/i386/compile/DIRAC.MP > > cpu0: Intel(R) Xeon(TM) CPU 3.06GHz ("GenuineIntel" 686-class) 3.07 GHz > > cpu0: > > > > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS > H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR > > real mem B = 2147028992 (2047MB) > > avail mem = 2076942336 (1980MB) > > mainbus0 at root > > bios0 at mainbus0: AT/286+ BIOS, date 12/31/99, BIOS32 rev. 0 @ 0xf0000, > > SMBIOS rev. 2.3 @ 0xec000 (42 entries) > > bios0: vendor HP version "P31" date 03/03/2005 > > bios0: HP ProLiant DL360 G3 > > acpi0 at bios0: rev 0 > > acpi0: tables DSDT FACP APIC SPCR > > acpi0: wakeup devices > > acpitimer0 at acpi0: 3579545 Hz, 32 bits > > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > > cpu0 at mainbus0: apid 0 (boot processor) > > cpu0: apic clock running at 133MHz > > cpu1 at mainbus0: apid 6 (application processor) > > cpu1: Intel(R) Xeon(TM) CPU 3.06GHz ("GenuineIntel" 686-class) 3.07 GHz > > cpu1: > > > > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS > H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR > > cpu2 at mainbus0: apid 1 (application processor) > > cpu2: Intel(R) Xeon(TM) CPU 3.06GHz ("GenuineIntel" 686-class) 3.07 GHz > > cpu2: > > > > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS > H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR > > cpu3 at mainbus0: apid 7 (application processor) > > cpu3: Intel(R) Xeon(TM) CPU 3.06GHz ("GenuineIntel" 686-class) 3.07 GHz > > cpu3: > > > > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS > H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR > > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 11, 16 pins > > ioapic1 at mainbus0: apid 3 pa 0xfec01000, version 11, 16 pins > > ioapic2 at mainbus0: apid 4 pa 0xfec02000, version 11, 16 pins > > ioapic3 at mainbus0: apid 5 pa 0xfec03000, version 11, 16 pins > > acpiprt0 at acpi0: bus 0 (PCI0) > > acpiprt1 at acpi0: bus 1 (PCI1) > > acpiprt2 at acpi0: bus 4 (PCI2) > > acpicpu0 at acpi0 > > acpicpu1 at acpi0 > > acpicpu2 at acpi0 > > acpicpu3 at acpi0 > > acpitz0 at acpi0: critical temperature 31 degC > > bios0: ROM list: 0xc0000/0x8000 0xc8000/0x4000 0xee000/0x2000! > > pci0 at mainbus0 bus 0: configuration mode 1 (bios) > > pchb0 at pci0 dev 0 function 0 "ServerWorks CNB20-HE Host (GC-LE)" rev > 0x33 > > pchb1 at pci0 dev 0 function 1 "ServerWorks CNB20-HE Host (GC-LE)" rev > 0x00 > > pchb2 at pci0 dev 0 function 2 "ServerWorks CNB20-HE Host (GC-LE)" rev > 0x00 > > pci1 at pchb2 bus 1 > > em0 at pci1 dev 1 function 0 "Intel PRO/1000MF (82545GM)" rev 0x04: apic > 3 > > int 12 (irq 10), address 00:1b:21:37:5d:e9 > > bge0 at pci1 dev 2 function 0 "Broadcom BCM5703X" rev 0x02, BCM5702/5703 > A2 > > (0x1002): apic 3 int 14 (irq 11), address 00:0f:20:d1:7c:61 > > brgphy0 at bge0 phy 1: BCM5703 10/100/1000baseT PHY, rev. 2 > > vga0 at pci0 dev 3 function 0 "ATI Rage XL" rev 0x27 > > wsdisplay0 at vga0 mux 1: console (80x25, vt100 emulation) > > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > > ciss0 at pci0 dev 4 function 0 "Compaq Smart Array 5i/532 rev.2" rev > 0x01: > > apic 3 int 15 (irq 3) > > ciss0: 1 LD, HW rev 1, FW 2.76/2.76 > > scsibus0 at ciss0: 1 targets > > sd0 at scsibus0 targ 0 lun 0: <COMPAQ, LOGICAL VOLUME, 2.76> SCSI2 > 0/direct > > fixed > > sd0: 69452MB, 512 bytes/sec, 142239510 sec total > > "Compaq iLO" rev 0x01 at pci0 dev 5 function 0 not configured > > "Compaq iLO" rev 0x01 at pci0 dev 5 function 2 not configured > > piixpm0 at pci0 dev 15 function 0 "ServerWorks CSB5" rev 0x93: polling > > iic0 at piixpm0 > > spdmem0 at iic0 addr 0x54: 1GB DDR SDRAM registered ECC PC2100CL2.5 > > spdmem1 at iic0 addr 0x56: 1GB DDR SDRAM registered ECC PC2100CL2.5 > > pciide0 at pci0 dev 15 function 1 "ServerWorks CSB5 IDE" rev 0x93: DMA > > atapiscsi0 at pciide0 channel 0 drive 0 > > scsibus1 at atapiscsi0: 2 targets > > cd0 at scsibus1 targ 0 lun 0: <COMPAQ, CRN-8245B, 2.19> ATAPI 5/cdrom > > removable > > cd0(pciide0:0:0): using PIO mode 4, DMA mode 2 > > pchb3 at pci0 dev 15 function 3 "ServerWorks CSB5 LPC" rev 0x00 > > pchb4 at pci0 dev 17 function 0 "ServerWorks CIOB-X2 PCIX" rev 0x05 > > pchb5 at pci0 dev 17 function 2 "ServerWorks CIOB-X2 PCIX" rev 0x05 > > pci2 at pchb5 bus 4 > > bge1 at pci2 dev 2 function 0 "Broadcom BCM5703X" rev 0x02, BCM5702/5703 > A2 > > (0x1002): apic 3 int 13 (irq 15), address 00:0f:20:d1:7c:5f > > brgphy1 at bge1 phy 1: BCM5703 10/100/1000baseT PHY, rev. 2 > > isa0 at mainbus0 > > isadma0 at isa0 > > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > > pckbc0 at isa0 port 0x60/5 > > pckbd0 at pckbc0 (kbd slot) > > pckbc0: using irq 1 for kbd slot > > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > > pms0 at pckbc0 (aux slot) > > pckbc0: using irq 12 for aux slot > > wsmouse0 at pms0 mux 0 > > pcppi0 at isa0 port 0x61 > > spkr0 at pcppi0 > > midi0 at pcppi0: <PC speaker> > > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 > > fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 > > fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec > > mtrr: Pentium Pro MTRR support > > vscsi0 at root > > scsibus2 at vscsi0: 256 targets > > root on sd0a swap on sd0b dump on sd0b > > > > > > > > -- > http://www.openbsd.org/lyrics.html
