Hello
Could you help me please with:
I'm trying to install 4.6 on a ProLiant DL260 G3.
The install from cd went just fine, but I discovered later that both
integrated broadcom bge* do not work.
Well, they accept IP and settings, but won't transmit a bit. Dhclient,
tcpdump, ping - not a packet.
I tried to change OS settings in Bios (Linux/Other) and MPS Table mode
from 'auto' both to 'Full Table APIC' and 'Full Table Mapped'.
I guess I didn't check all the possible combinations of APIC/OS :) Once
I managed to crash to ddb while OS Setting was to Windows :)
Nevertheless, they don't work neither with bsd nor bsd.mp kernel.
dmesg follows: (this is a ramdisk install, but it is the same)
OpenBSD 4.6 (RAMDISK_CD) #53: Thu Jul 9 21:41:35 MDT 2009
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: Intel(R) Xeon(TM) CPU 3.06GHz ("GenuineIntel" 686-class) 3.07 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CF
LUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR
real mem = 2147028992 (2047MB)
avail mem = 2069016576 (1973MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 12/31/99, BIOS32 rev. 0 @ 0xf0000,
SMBIOS
rev. 2.3 @ 0xec000 (42 entries)
bios0: vendor HP version "P31" date 03/03/2005
bios0: HP ProLiant DL360 G3
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP APIC SPCR
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 133MHz
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 11, 16 pins
ioapic1 at mainbus0: apid 3 pa 0xfec01000, version 11, 16 pins
ioapic2 at mainbus0: apid 4 pa 0xfec02000, version 11, 16 pins
ioapic3 at mainbus0: apid 5 pa 0xfec03000, version 11, 16 pinsacpiprt0
at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (PCI1)
acpiprt2 at acpi0: bus 4 (PCI2)
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x4000 0xcc000/0x1800
0xee000/0x2000!
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "ServerWorks CNB20-HE Host (GC-LE)" rev 0x33
pchb1 at pci0 dev 0 function 1 "ServerWorks CNB20-HE Host (GC-LE)" rev 0x00
pchb2 at pci0 dev 0 function 2 "ServerWorks CNB20-HE Host (GC-LE)" rev 0x00
pci1 at pchb2 bus 1
bge0 at pci1 dev 2 function 0 "Broadcom BCM5703X" rev 0x02, BCM5703 A2
(0x1002):
apic 3 int 14 (irq 11), address 00:0f:20:d1:7c:61
brgphy0 at bge0 phy 1: BCM5703 10/100/1000baseT PHY, rev. 2
vga1 at pci0 dev 3 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
ciss0 at pci0 dev 4 function 0 "Compaq Smart Array 5i/532 rev.2" rev
0x01: apic
3 int 15 (irq 3)
ciss0: 1 LD, HW rev 1, FW 2.76/2.76
scsibus0 at ciss0: 1 targets
sd0 at scsibus0 targ 0 lun 0: <COMPAQ, LOGICAL VOLUME, 2.76> SCSI2
0/direct fixe
d
sd0: 69452MB, 512 bytes/sec, 142239510 sec total
"Compaq iLO" rev 0x01 at pci0 dev 5 function 0 not configured
"Compaq iLO" rev 0x01 at pci0 dev 5 function 2 not configured
pcib0 at pci0 dev 15 function 0 "ServerWorks CSB5" rev 0x93
pciide0 at pci0 dev 15 function 1 "ServerWorks CSB5 IDE" rev 0x93: DMA
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <COMPAQ, CRN-8245B, 2.19> ATAPI 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, DMA mode 2
ohci0 at pci0 dev 15 function 2 "ServerWorks OSB4/CSB5 USB" rev 0x05:
apic 2 int
10 (irq 10), version 1.0, legacy support
pchb3 at pci0 dev 15 function 3 "ServerWorks CSB5 LPC" rev 0x00
pchb4 at pci0 dev 17 function 0 "ServerWorks CIOB-X2 PCIX" rev 0x05
pchb5 at pci0 dev 17 function 2 "ServerWorks CIOB-X2 PCIX" rev 0x05
pci2 at pchb5 bus 4
bge1 at pci2 dev 2 function 0 "Broadcom BCM5703X" rev 0x02, BCM5703 A2
(0x1002):
apic 3 int 13 (irq 15), address 00:0f:20:d1:7c:5f
brgphy1 at bge1 phy 1: BCM5703 10/100/1000baseT PHY, rev. 2
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
brgphy1 at bge1 phy 1: BCM5703 10/100/1000baseT PHY, rev. 2
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
usb0 at ohci0: USB revision 1.0
uhub0 at usb0 "ServerWorks OHCI root hub" rev 1.00/1.00 addr 1
rd0: fixed, 3800 blocks
umass0 at uhub0 port 1 configuration 1 interface 0 "HP Virtual
Management Device
" rev 1.10/0.01 addr 2
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
cd1 at scsibus2 targ 1 lun 0: <HP, Virtual DVD-ROM, 0.0> SCSI0 5/cdrom
removable
softraid0 at root
root on rd0a swap on rd0b dump on rd0b
Thank you
Peter Huncar
