Sorry it was just "test" if there is some difference. Of course problem is same either with sudo or without.
2009/12/4 Abel Abraham Camarillo Ojeda <acam...@the00z.org>: > On Fri, Dec 04, 2009 at 08:41:12AM +0100, TomC!E! BodE>C!r wrote: >> Hi all, >> >> someone have similar problem? When I try : >> >> $ sudo setxkbmap cz >> $ >> >> then my network connection stop responding and I must run : >> >> $ sudo sh /etc/netstart >> >> In Xorg.log there is same error as here >> https://bugs.freedesktop.org/show_bug.cgi?id=21761 >> >> Before this error I can see line with : >> >> mtrr set failed: Invalid argument >> >> OpenBSD 4.6-current (GENERIC.MP) #325: Sat Nov 28 18:58:05 MST 2009 >> B B dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP >> cpu0: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz ("GenuineIntel" >> 686-class) 2.40 GHz >> cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,C X16,xTPR >> real mem B = 3707650048 (3535MB) >> avail mem = 3608199168 (3441MB) >> mainbus0 at root >> bios0 at mainbus0: AT/286+ BIOS, date 09/17/09, BIOS32 rev. 0 @ >> 0xffa10, SMBIOS rev. 2.4 @ 0xf6510 (57 entries) >> bios0: vendor Dell Inc. version "A17" date 09/17/2009 >> bios0: Dell Inc. Latitude E6400 >> acpi0 at bios0: rev 2 >> acpi0: tables DSDT FACP HPET DMAR APIC ASF! MCFG TCPA SLIC SSDT >> acpi0: wakeup devices PCI0(S4) PCIE(S4) USB1(S3) USB2(S3) USB3(S3) >> USB4(S3) USB5(S3) USB6(S3) EHC2(S3) EHCI(S3) AZAL(S3) RP01(S4) >> RP02(S4) RP03(S4) RP04(S3) RP05(S3) RP06(S5) LID_(S3) PBTN(S4) >> acpitimer0 at acpi0: 3579545 Hz, 24 bits >> acpihpet0 at acpi0: 14318179 Hz >> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat >> cpu0 at mainbus0: apid 0 (boot processor) >> cpu0: apic clock running at 265MHz >> cpu1 at mainbus0: apid 1 (application processor) >> cpu1: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz ("GenuineIntel" >> 686-class) 2.40 GHz >> cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,C X16,xTPR >> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins >> ioapic0: misconfigured as apic 0, remapped to apid 2 >> acpiprt0 at acpi0: bus 3 (PCIE) >> acpiprt1 at acpi0: bus -1 (AGP_) >> acpiprt2 at acpi0: bus 11 (RP01) >> acpiprt3 at acpi0: bus 12 (RP02) >> acpiprt4 at acpi0: bus 13 (RP03) >> acpiprt5 at acpi0: bus -1 (RP04) >> acpiprt6 at acpi0: bus -1 (RP05) >> acpiprt7 at acpi0: bus -1 (RP06) >> acpiprt8 at acpi0: bus 0 (PCI0) >> acpiec0 at acpi0 >> acpicpu0 at acpi0: C3, C2, C1, PSS >> acpicpu1 at acpi0: C3, C2, C1, PSS >> acpitz0 at acpi0: critical temperature 107 degC >> acpibtn0 at acpi0: LID_ >> acpibtn1 at acpi0: PBTN >> acpibtn2 at acpi0: SBTN >> acpiac0 at acpi0: AC unit online >> acpibat0 at acpi0: BAT0 model "DELL MP4948B" serial 36706 type LION >> oem "Samsung SDI" >> acpibat1 at acpi0: BAT1 not present >> acpivideo0 at acpi0: VID_ >> acpivout0 at acpivideo0: CRT_ >> acpivout1 at acpivideo0: LCD_ >> acpivout2 at acpivideo0: DVI_ >> acpivout3 at acpivideo0: DVI2 >> acpivout4 at acpivideo0: DP__ >> acpivout5 at acpivideo0: DP2_ >> acpivideo1 at acpi0: VID_ >> acpivout6 at acpivideo1: CRT_ >> acpivout7 at acpivideo1: LCD_ >> acpivout8 at acpivideo1: DP__ >> acpivout9 at acpivideo1: DP2_ >> acpivout10 at acpivideo1: DVI_ >> acpivout11 at acpivideo1: DVI2 >> acpivideo2 at acpi0: VID2 >> bios0: ROM list: 0xc0000/0xf800! 0xcf800/0x800 >> cpu0: Enhanced SpeedStep 2394 MHz: speeds: 2401, 2400, 1600, 800 MHz >> pci0 at mainbus0 bus 0: configuration mode 1 (bios) >> pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07 >> vga1 at pci0 dev 2 function 0 "Intel GM45 Video" rev 0x07 >> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) >> wsdisplay0: screen 1-5 added (80x25, vt100 emulation) >> intagp0 at vga1 >> agp0 at intagp0: aperture at 0xe0000000, size 0x10000000 >> inteldrm0 at vga1: apic 2 int 16 (irq 11) >> drm0 at inteldrm0 >> "Intel GM45 Video" rev 0x07 at pci0 dev 2 function 1 not configured >> em0 at pci0 dev 25 function 0 "Intel ICH9 IGP M AMT" rev 0x03: apic 2 >> int 22 (irq 10), address xx:xx:xx:xx:xx:xx >> uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 2 >> int 20 (irq 3) >> uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 2 >> int 21 (irq 11) >> uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 2 >> int 22 (irq 10) >> ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 2 >> int 22 (irq 10) >> usb0 at ehci0: USB revision 2.0 >> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 >> azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: >> apic 2 int 21 (irq 11) >> azalia0: codecs: IDT 92HD71B7, Intel/0x2802, using IDT 92HD71B7 >> audio0 at azalia0 >> ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: apic 2 >> int 16 (irq 0) >> pci1 at ppb0 bus 11 >> ppb1 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: apic 2 >> int 17 (irq 0) >> pci2 at ppb1 bus 12 >> iwn0 at pci2 dev 0 function 0 "Intel WiFi Link 5100" rev 0x00: apic 2 >> int 17 (irq 3), MIMO 1T2R, MoW, address xx:xx:xx:xx:xx:xx >> ppb2 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x03: apic 2 >> int 18 (irq 0) >> pci3 at ppb2 bus 13 >> uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 2 >> int 20 (irq 3) >> uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 2 >> int 21 (irq 11) >> uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 2 >> int 22 (irq 10) >> ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 2 >> int 20 (irq 3) >> usb1 at ehci1: USB revision 2.0 >> uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 >> ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93 >> pci4 at ppb3 bus 3 >> cbb0 at pci4 dev 1 function 0 "Ricoh 5C476 CardBus" rev 0xba: apic 2 >> int 19 (irq 10) >> "Ricoh 5C832 Firewire" rev 0x04 at pci4 dev 1 function 1 not configured >> sdhc0 at pci4 dev 1 function 2 "Ricoh 5C822 SD/MMC" rev 0x21: apic 2 >> int 18 (irq 11) >> sdmmc0 at sdhc0 >> "Ricoh 5C843 MMC" rev 0x11 at pci4 dev 1 function 3 not configured >> cardslot0 at cbb0 slot 0 flags 0 >> cardbus0 at cardslot0: bus 4 device 0 cacheline 0x10, lattimer 0x20 >> pcmcia0 at cardslot0 >> pcib0 at pci0 dev 31 function 0 "Intel 82801IEM LPC" rev 0x03 >> pciide0 at pci0 dev 31 function 2 "Intel 82801I SATA" rev 0x03: DMA, >> channel 0 configured to native-PCI, channel 1 configured to native-PCI >> pciide0: using apic 2 int 19 (irq 10) for native-PCI interrupt >> wd0 at pciide0 channel 0 drive 0: <Hitachi HTS723280L9A362> >> wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors >> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6 >> atapiscsi0 at pciide0 channel 1 drive 0 >> scsibus0 at atapiscsi0: 2 targets >> cd0 at scsibus0 targ 0 lun 0: <TSSTcorp, DVD+-RW TS-U633A, D200> ATAPI >> 5/cdrom removable >> cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5 >> ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x03: apic >> 2 int 17 (irq 3) >> iic0 at ichiic0 >> spdmem0 at iic0 addr 0x50: 2GB DDR2 SDRAM non-parity PC2-6400CL5 SO-DIMM >> spdmem1 at iic0 addr 0x52: 2GB DDR2 SDRAM non-parity PC2-6400CL5 SO-DIMM >> pciide1 at pci0 dev 31 function 5 "Intel 82801I SATA" rev 0x03: DMA, >> channel 0 wired to native-PCI, channel 1 wired to native-PCI >> pciide1: using apic 2 int 19 (irq 10) for native-PCI interrupt >> usb2 at uhci0: USB revision 1.0 >> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 >> usb3 at uhci1: USB revision 1.0 >> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 >> usb4 at uhci2: USB revision 1.0 >> uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 >> usb5 at uhci3: USB revision 1.0 >> uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 >> usb6 at uhci4: USB revision 1.0 >> uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1 >> usb7 at uhci5: USB revision 1.0 >> uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1 >> isa0 at pcib0 >> isadma0 at isa0 >> com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo >> pckbc0 at isa0 port 0x60/5 >> pckbd0 at pckbc0 (kbd slot) >> pckbc0: using irq 1 for kbd slot >> wskbd0 at pckbd0: console keyboard, using wsdisplay0 >> pms0 at pckbc0 (aux slot) >> pckbc0: using irq 12 for aux slot >> wsmouse0 at pms0 mux 0 >> pcppi0 at isa0 port 0x61 >> midi0 at pcppi0: <PC speaker> >> spkr0 at pcppi0 >> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 >> mtrr: Pentium Pro MTRR support >> uvideo0 at uhub0 port 6 configuration 1 interface 0 >> "CN0TX5937248792101KJ Laptop_Integrated_Webcam_0.3M" rev 2.00/88.06 >> addr 2 >> uvideo0: video control not supported for this device. >> video0 at uvideo0 >> uhub8 at uhub2 port 1 "Broadcom BCM2046B1" rev 2.00/1.00 addr 2 >> ugen0 at uhub4 port 1 "Broadcom Corp 5880" rev 1.10/1.01 addr 2 >> uhidev0 at uhub8 port 1 configuration 1 interface 0 "Dell product >> 0x8157" rev 2.00/1.00 addr 3 >> uhidev0: iclass 3/1, 1 report id >> ukbd0 at uhidev0 reportid 1: 8 modifier keys, 6 key codes >> wskbd1 at ukbd0 mux 1 >> wskbd1: connecting to wsdisplay0 >> uhidev1 at uhub8 port 2 configuration 1 interface 0 "Dell product >> 0x8158" rev 2.00/1.00 addr 4 >> uhidev1: iclass 3/1, 125 report ids >> ums0 at uhidev1 reportid 2: 3 buttons >> wsmouse1 at ums0 mux 0 >> uhid0 at uhidev1 reportid 125: input=2, output=0, feature=0 >> vscsi0 at root >> scsibus1 at vscsi0: 256 targets >> softraid0 at root >> root on wd0a swap on wd0b dump on wd0b >> wskbd1: disconnecting from wsdisplay0 >> wskbd1 detached >> ukbd0 detached >> uhidev0 detached >> wsmouse1 detached >> ums0 detached >> uhid0 detached >> uhidev1 detached >> uhub8 detached >> >> >> -- >> http://www.openbsd.org/lyrics.html >> > > why are you running setxkbmap with sudo ? > > -- > DISCLAIMER: http://goldmark.org/jeff/stupid-disclaimers/ > This message will self-destruct in 3 seconds.
