Thanks!
Alf
On Friday 06 November 2009 18:17:23 you wrote:
> >> machines and because the HP DL360 G6 seems to be cheaper (and 'newer'),
> >> does anyone here use such beast successfully with OpenBSD?
>
> As promised the output of dmesg and sysctl below.
> Note that the memory sockets in this machine are empty, e.g. it comes
> with 4 GB on board apparently by default.
>
> # sysctl hw
> hw.machine=i386
> hw.model=Intel(R) Xeon(R) CPU E5504 @ 2.00GHz ("GenuineIntel" 686-class)
> hw.ncpu=4
> hw.byteorder=1234
> hw.pagesize=4096
> hw.disknames=sd0,sd1,cd0
> hw.diskcount=3
> hw.sensors.acpitz0.temp0=8.30 degC (zone temperature)
> hw.sensors.cpu0.temp0=57.00 degC
> hw.cpuspeed=2001
> hw.vendor=Hewlett-Packard
> hw.product=ProLiant DL360 G6
> hw.serialno=CZJ929074N
> hw.uuid=34373030-3635-435a-4a39-32393037344e
> hw.physmem=3747438592
> hw.usermem=3747229696
> hw.ncpufound=4
>
>
> # dmesg
> OpenBSD 4.6 (GENERIC.MP) #89: Thu Jul 9 21:32:39 MDT 2009
> dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
> cpu0: Intel(R) Xeon(R) CPU E5504 @ 2.00GHz ("GenuineIntel" 686-class) 2.01
> GHz cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFL
>USH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX
>16,xTPR real mem = 3747438592 (3573MB)
> avail mem = 3638829056 (3470MB)
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 12/31/99, BIOS32 rev. 0 @
> 0xf0000, SMBIOS rev. 2.6 @ 0xdf7fe000 (123 entries)
> bios0: vendor Hewlett-Packard version "P64" date 06/02/2009
> bios0: Hewlett-Packard ProLiant DL360 G6
> acpi0 at bios0: rev 2
> acpi0: tables DSDT FACP SPCR MCFG HPET FFFF SPMI ERST APIC SRAT FFFF
> BERT HEST DMAR SSDT SSDT SSDT
> acpi0: wakeup devices
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpihpet0 at acpi0: 14318179 Hz
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: unknown i686 model 0x1a, can't get bus clock (0x0)
> cpu0: apic clock running at 133MHz
> cpu1 at mainbus0: apid 4 (application processor)
> cpu1: Intel(R) Xeon(R) CPU E5504 @ 2.00GHz ("GenuineIntel" 686-class) 2.01
> GHz cpu1:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFL
>USH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX
>16,xTPR cpu2 at mainbus0: apid 2 (application processor)
> cpu2: Intel(R) Xeon(R) CPU E5504 @ 2.00GHz ("GenuineIntel" 686-class) 2.01
> GHz cpu2:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFL
>USH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX
>16,xTPR cpu3 at mainbus0: apid 6 (application processor)
> cpu3: Intel(R) Xeon(R) CPU E5504 @ 2.00GHz ("GenuineIntel" 686-class) 2.01
> GHz cpu3:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFL
>USH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX
>16,xTPR ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
> ioapic1 at mainbus0: apid 0 pa 0xfec80000, version 20, 24 pins
> acpiprt0 at acpi0: bus 1 (IP2P)
> acpiprt1 at acpi0: bus -1 (IPT1)
> acpiprt2 at acpi0: bus 3 (PT01)
> acpiprt3 at acpi0: bus 10 (PT02)
> acpiprt4 at acpi0: bus 7 (PT03)
> acpiprt5 at acpi0: bus 11 (PT04)
> acpiprt6 at acpi0: bus 12 (PT05)
> acpiprt7 at acpi0: bus 13 (PT06)
> acpiprt8 at acpi0: bus 14 (PT07)
> acpiprt9 at acpi0: bus 2 (PT08)
> acpiprt10 at acpi0: bus 4 (PT09)
> acpiprt11 at acpi0: bus 15 (PT0A)
> acpiprt12 at acpi0: bus 0 (PCI0)
> acpicpu0 at acpi0: C3, C3, C1
> acpicpu1 at acpi0: C3, C3, C1
> acpicpu2 at acpi0: C3, C3, C1
> acpicpu3 at acpi0: C3, C3, C1
> acpitz0 at acpi0: critical temperature 31 degC
> bios0: ROM list: 0xc0000/0xb000 0xcc400/0x3600! 0xcfa00/0x1e00!
> 0xd1800/0x4000 ipmi at mainbus0 not configured
> cpu0: EST: unknown system bus clock
> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> pchb0 at pci0 dev 0 function 0 vendor "Intel", unknown product 0x3406 rev
> 0x13 ppb0 at pci0 dev 1 function 0 "Intel X58 PCIE" rev 0x13
> pci1 at ppb0 bus 3
> ciss0 at pci1 dev 0 function 0 "Hewlett-Packard Smart Array" rev 0x01:
> apic 0 int 4 (irq 7)
> ciss0: 2 LDs, HW rev 2, FW 1.62/1.62, 64bit fifo rro
> scsibus0 at ciss0: 2 targets
> sd0 at scsibus0 targ 0 lun 0: <HP, LOGICAL VOLUME, 1.62> SCSI3 0/direct
> fixed sd0: 139979MB, 512 bytes/sec, 286677120 sec total
> sd1 at scsibus0 targ 1 lun 0: <HP, LOGICAL VOLUME, 1.62> SCSI3 0/direct
> fixed sd1: 139979MB, 512 bytes/sec, 286677120 sec total
> ppb1 at pci0 dev 2 function 0 "Intel X58 PCIE" rev 0x13
> pci2 at ppb1 bus 10
> ppb2 at pci0 dev 3 function 0 "Intel X58 PCIE" rev 0x13
> pci3 at ppb2 bus 7
> ppb3 at pci0 dev 4 function 0 "Intel X58 PCIE" rev 0x13
> pci4 at ppb3 bus 11
> ppb4 at pci0 dev 5 function 0 "Intel X58 PCIE" rev 0x13
> pci5 at ppb4 bus 12
> ppb5 at pci0 dev 6 function 0 "Intel X58 PCIE" rev 0x13
> pci6 at ppb5 bus 13
> ppb6 at pci0 dev 7 function 0 "Intel X58 PCIE" rev 0x13
> pci7 at ppb6 bus 14
> ppb7 at pci0 dev 8 function 0 "Intel X58 PCIE" rev 0x13
> pci8 at ppb7 bus 2
> bnx0 at pci8 dev 0 function 0 "Broadcom BCM5709" rev 0x20: apic 0 int 7
> (irq 7) bnx1 at pci8 dev 0 function 1 "Broadcom BCM5709" rev 0x20: apic 0
> int 15 (irq 11)
> ppb8 at pci0 dev 9 function 0 "Intel X58 PCIE" rev 0x13
> pci9 at ppb8 bus 4
> ppb9 at pci0 dev 10 function 0 "Intel X58 PCIE" rev 0x13
> pci10 at ppb9 bus 15
> pchb1 at pci0 dev 13 function 0 vendor "Intel", unknown product 0x343a rev
> 0x13 pchb2 at pci0 dev 13 function 1 vendor "Intel", unknown product 0x343b
> rev 0x13 pchb3 at pci0 dev 13 function 2 vendor "Intel", unknown product
> 0x343c rev 0x13 pchb4 at pci0 dev 13 function 3 vendor "Intel", unknown
> product 0x343d rev 0x13 pchb5 at pci0 dev 13 function 4 vendor "Intel",
> unknown product 0x3418 rev 0x13 pchb6 at pci0 dev 13 function 5 vendor
> "Intel", unknown product 0x3419 rev 0x13 pchb7 at pci0 dev 13 function 6
> vendor "Intel", unknown product 0x341a rev 0x13 pchb8 at pci0 dev 14
> function 0 vendor "Intel", unknown product 0x341c rev 0x13 pchb9 at pci0
> dev 14 function 1 vendor "Intel", unknown product 0x341d rev 0x13 pchb10 at
> pci0 dev 14 function 2 vendor "Intel", unknown product 0x341e rev 0x13
> pchb11 at pci0 dev 14 function 3 vendor "Intel", unknown product 0x341f rev
> 0x13 pchb12 at pci0 dev 14 function 4 vendor "Intel", unknown product
> 0x3439 rev 0x13 "Intel X58 Misc" rev 0x13 at pci0 dev 20 function 0 not
> configured "Intel X58 GPIO" rev 0x13 at pci0 dev 20 function 1 not
> configured "Intel X58 RAS" rev 0x13 at pci0 dev 20 function 2 not
> configured
> uhci0 at pci0 dev 29 function 0 "Intel 82801JI USB" rev 0x00: apic 8
> int 20 (irq 5)
> uhci1 at pci0 dev 29 function 1 "Intel 82801JI USB" rev 0x00: apic 8
> int 23 (irq 7)
> uhci2 at pci0 dev 29 function 2 "Intel 82801JI USB" rev 0x00: apic 8
> int 22 (irq 10)
> uhci3 at pci0 dev 29 function 3 "Intel 82801JI USB" rev 0x00: apic 8
> int 23 (irq 7)
> ehci0 at pci0 dev 29 function 7 "Intel 82801JI USB" rev 0x00: apic 8
> int 20 (irq 5)
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> ppb10 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x90
> pci11 at ppb10 bus 1
> vga1 at pci11 dev 3 function 0 "ATI ES1000" rev 0x02
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> radeondrm0 at vga1: apic 8 int 23 (irq 7)
> drm0 at radeondrm0
> "Compaq iLO" rev 0x03 at pci11 dev 4 function 0 not configured
> "Compaq iLO" rev 0x03 at pci11 dev 4 function 2 not configured
> uhci4 at pci11 dev 4 function 4 "Hewlett-Packard USB" rev 0x00: apic 8
> int 22 (irq 10)
> "Hewlett-Packard IPMI" rev 0x00 at pci11 dev 4 function 6 not configured
> usb1 at uhci4: USB revision 1.0
> uhub1 at usb1 "Hewlett-Packard UHCI root hub" rev 1.00/1.00 addr 1
> pcib0 at pci0 dev 31 function 0 "Intel 82801JIB LPC" rev 0x00
> pciide0 at pci0 dev 31 function 2 "Intel 82801JI SATA" rev 0x00: DMA,
> channel 0 configured to native-PCI, channel 1 configured to native-PCI
> pciide0: using apic 8 int 17 (irq 11) for native-PCI interrupt
> atapiscsi0 at pciide0 channel 0 drive 0
> scsibus1 at atapiscsi0: 2 targets
> cd0 at scsibus1 targ 0 lun 0: <TEAC, DV-28S-V, C.0F> ATAPI 5/cdrom
> removable cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
> usb2 at uhci0: USB revision 1.0
> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb3 at uhci1: USB revision 1.0
> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb4 at uhci2: USB revision 1.0
> uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb5 at uhci3: USB revision 1.0
> uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> isa0 at pcib0
> isadma0 at isa0
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> com1: probed fifo depth: 0 bytes
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> mtrr: Pentium Pro MTRR support
> uhidev0 at uhub1 port 1 configuration 1 interface 0 "HP Virtual
> Keyboard" rev 1.10/0.02 addr 2
> uhidev0: iclass 3/1
> ukbd0 at uhidev0: 8 modifier keys, 6 key codes, country code 33
> wskbd1 at ukbd0 mux 1
> wskbd1: connecting to wsdisplay0
> uhidev1 at uhub1 port 1 configuration 1 interface 1 "HP Virtual
> Keyboard" rev 1.10/0.02 addr 2
> uhidev1: iclass 3/1
> ums0 at uhidev1: 3 buttons
> wsmouse0 at ums0 mux 0
> uhub6 at uhub1 port 2 "HP Virtual Hub" rev 1.10/0.01 addr 3
> softraid0 at root
> root on sd0a swap on sd0b dump on sd0b
> cpu2: unknown i686 model 0x1a, can't get bus clock (0x0)
> cpu1: unknown i686 model 0x1a, can't get bus clock (0x0)
> cpu3: unknown i686 model 0x1a, can't get bus clock (0x0)
> bnx0: address 00:25:b3:ab:58:78
> brgphy0 at bnx0 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
> bnx1: address 00:25:b3:ab:58:7a
> brgphy1 at bnx1 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
> #
