On Fri, Nov 6, 2009 at 2:55 AM, Steven <w.steven.schnei...@ualberta.net>
wrote:
> Hi,
>
> I'm unable to get Xorg to start any more on my computer since about
> three, or four snapshots ago. I'm not desperate for a GUI, but it
> would be nice. Fails whether machdep.allowaperture is set to 1, or
> 2.
It looks like /dev/pci* devices are setup incorrectly. re-run MAKEDEV
The devices should look like:
lrwx------ 1 root wheel 4 Jul 4 19:10 /dev/pci -> pci0
crw------- 1 root wheel 72, 0 Jul 18 10:29 /dev/pci0
crw------- 1 root wheel 72, 1 Jul 18 10:29 /dev/pci1
crw------- 1 root wheel 72, 2 Jul 18 10:29 /dev/pci2
crw------- 1 root wheel 72, 3 Jul 18 10:29 /dev/pci3
>
> dmesg, /etc/X11/xorg.conf and Xorg.0.log outputs follow.
> machdep.allowaperture set to 2.
>
> OpenBSD 4.6-current (GENERIC) #353: Mon Nov 2 10:58:43 MST 2009
> dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: AMD Athlon(tm) processor ("AuthenticAMD" 686-class, 256KB L2 cache)
> 1.20 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR
> real mem = 804810752 (767MB)
> avail mem = 771358720 (735MB)
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 07/13/01, BIOS32 rev. 0 @ 0xfb5d0,
> SMBIOS rev. 2.2 @ 0xf0800 (38 entries)
> bios0: vendor Award Software International, Inc. version "6.00 PG" date
> 07/13/2001
> bios0: Gigabyte Technology Co., LTD 7DXR
> apm at bios0 function 0x15 not configured
> acpi0 at bios0: rev 0
> acpi0: tables DSDT FACP
> acpi0: wakeup devices SLPB(S5) PCI0(S5) USB0(S4) USB1(S4) UAR1(S4)
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpicpu0 at acpi0
> acpibtn0 at acpi0: PWRB
> acpibtn1 at acpi0: SLPB
> bios0: ROM list: 0xc0000/0x8000 0xcc000/0x4000! 0xd0000/0x4000
> cpu0 at mainbus0: (uniprocessor)
> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> pchb0 at pci0 dev 0 function 0 "AMD 761 PCI" rev 0x13
> amdagp0 at pchb0
> agp0 at amdagp0: aperture at 0xd0000000, size 0x4000000
> ppb0 at pci0 dev 1 function 0 "AMD 761 PCI-PCI" rev 0x00
> pci1 at ppb0 bus 1
> vga1 at pci1 dev 5 function 0 "ATI Mach64" rev 0x27
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> pcib0 at pci0 dev 7 function 0 "VIA VT82C686 ISA" rev 0x40
> pciide0 at pci0 dev 7 function 1 "VIA VT82C571 IDE" rev 0x06: ATA100,
> channel 0 configured to compatibility, channel 1 configured to
compatibility
> wd0 at pciide0 channel 0 drive 0: <Maxtor 6Y080L0>
> wd0: 16-sector PIO, LBA, 78167MB, 160086528 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
> atapiscsi0 at pciide0 channel 1 drive 0
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, RW/DVD GCC-4120B, 2.03> ATAPI
> 5/cdrom removable
> atapiscsi1 at pciide0 channel 1 drive 1
> scsibus1 at atapiscsi1: 2 targets
> cd1 at scsibus1 targ 0 lun 0: <BENQ, CDRW 5232X, KPBY> ATAPI 5/cdrom
> removable
> cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
> cd1(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
> uhci0 at pci0 dev 7 function 2 "VIA VT83C572 USB" rev 0x1a: irq 11
> uhci1 at pci0 dev 7 function 3 "VIA VT83C572 USB" rev 0x1a: irq 11
> viaenv0 at pci0 dev 7 function 4 "VIA VT82C686 SMBus" rev 0x40: can't map
PM
> i/o space
> rl0 at pci0 dev 12 function 0 "D-Link Systems 530TX+" rev 0x10: irq 10,
> address 00:50:ba:59:24:c3
> rlphy0 at rl0 phy 0: RTL internal PHY
> eap0 at pci0 dev 14 function 0 "Ensoniq CT5880" rev 0x03: irq 5
> ac97: codec id 0x83847608 (SigmaTel STAC9708/11)
> ac97: codec features 18 bit DAC, 18 bit ADC, SigmaTel 3D
> audio0 at eap0
> midi0 at eap0: <AudioPCI MIDI UART>
> uhci2 at pci0 dev 15 function 0 "VIA VT83C572 USB" rev 0x50: irq 11
> uhci3 at pci0 dev 15 function 1 "VIA VT83C572 USB" rev 0x50: irq 10
> ehci0 at pci0 dev 15 function 2 "VIA VT6202 USB" rev 0x51: irq 7
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "VIA EHCI root hub" rev 2.00/1.00 addr 1
> pciide1 at pci0 dev 16 function 0 "Promise PDC20265" rev 0x02: DMA, channel
> 0 configured to native-PCI, channel 1 configured to native-PCI
> pciide1: using irq 11 for native-PCI interrupt
> pciide1: channel 0 disabled (no drives)
> pciide1: channel 1 disabled (no drives)
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pcppi0 at isa0 port 0x61
> midi1 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> usb1 at uhci0: USB revision 1.0
> uhub1 at usb1 "VIA UHCI root hub" rev 1.00/1.00 addr 1
> usb2 at uhci1: USB revision 1.0
> uhub2 at usb2 "VIA UHCI root hub" rev 1.00/1.00 addr 1
> usb3 at uhci2: USB revision 1.0
> uhub3 at usb3 "VIA UHCI root hub" rev 1.00/1.00 addr 1
> usb4 at uhci3: USB revision 1.0
> uhub4 at usb4 "VIA UHCI root hub" rev 1.00/1.00 addr 1
> biomask fddd netmask fddd ttymask ffdf
> mtrr: Pentium Pro MTRR support
> uhidev0 at uhub1 port 2 configuration 1 interface 0 "KYE USB MOUSE" rev
> 1.10/0.00 addr 2
> uhidev0: iclass 3/1
> ums0 at uhidev0: 3 buttons, Z dir
> wsmouse0 at ums0 mux 0
> vscsi0 at root
> scsibus2 at vscsi0: 256 targets
> softraid0 at root
> root on wd0a swap on wd0b dump on wd0b
>
> /etc/X11/xorg.conf
>
> # File generated by xorgconfig.
>
> #
> # Copyright 2004 The X.Org Foundation
> #
> # Permission is hereby granted, free of charge, to any person obtaining a
> # copy of this software and associated documentation files (the
"Software"),
> # to deal in the Software without restriction, including without limitation
> # the rights to use, copy, modify, merge, publish, distribute, sublicense,
> # and/or sell copies of the Software, and to permit persons to whom the
> # Software is furnished to do so, subject to the following conditions:
> # # The above copyright notice and this permission notice shall be included
> in
> # all copies or substantial portions of the Software.
> # # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
> OR
> # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> # The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
> # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
> # SOFTWARE.
> # # Except as contained in this notice, the name of The X.Org Foundation
> shall
> # not be used in advertising or otherwise to promote the sale, use or other
> # dealings in this Software without prior written authorization from
> # The X.Org Foundation.
> #
>
> # **********************************************************************
> # Refer to the xorg.conf(5) man page for details about the format of # this
> file.
> # **********************************************************************
>
> # **********************************************************************
> # Module section -- this section is used to specify
> # which dynamically loadable modules to load.
> # **********************************************************************
> #
> Section "Module"
>
> # This loads the DBE extension module.
>
> Load "dbe" # Double buffer extension
>
> # This loads the miscellaneous extensions module, and disables
> # initialisation of the XFree86-DGA extension within that module.
> SubSection "extmod"
> Option "omit xfree86-dga" # don't initialise the DGA extension
> EndSubSection
>
> # This loads the font modules
> # Load "type1"
> Load "freetype"
> # Load "xtt"
>
> # This loads the GLX module
> # Load "glx"
> # This loads the DRI module
> # Load "dri"
>
> EndSection
>
> # **********************************************************************
> # Files section. This allows default font and rgb paths to be set
> # **********************************************************************
>
> Section "Files"
>
> # Multiple FontPath entries are allowed (which are concatenated together),
> # as well as specifying multiple comma-separated entries in one FontPath
> # command (or a combination of both methods)
> #
> FontPath "/usr/X11R6/lib/X11/fonts/misc/"
> FontPath "/usr/X11R6/lib/X11/fonts/TTF/"
> FontPath "/usr/X11R6/lib/X11/fonts/OTF"
> FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
> FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
> FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
> FontPath "/usr/X11R6/lib/X11/fonts/local/"
> # FontPath "/usr/X11R6/lib/X11/fonts/TrueType/"
> # FontPath "/usr/X11R6/lib/X11/fonts/freefont/"
> FontPath "/usr/local/lib/X11/fonts/mscorefonts/"
> FontPath "/usr/local/lib/X11/fonts/ghostscript/"
>
> # The module search path. The default path is shown here.
>
> # ModulePath "/usr/X11R6/lib/modules"
>
> EndSection
>
> # **********************************************************************
> # Server flags section.
> # **********************************************************************
>
> Section "ServerFlags"
>
> # Uncomment this to cause a core dump at the spot where a signal is #
> received. This may leave the console in an unusable state, but may
> # provide a better stack trace in the core dump to aid in debugging
>
> # Option "NoTrapSignals"
>
> # Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence
> # (where n is 1 through 12). This allows clients to receive these key
> # events.
>
> # Option "DontVTSwitch"
>
> # Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
> # This allows clients to receive this key event.
>
> # Option "DontZap"
>
> # Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching
> # sequences. This allows clients to receive these key events.
>
> # Option "Dont Zoom"
>
> # Uncomment this to disable tuning with the xvidtune client. With
> # it the client can still run and fetch card and monitor attributes,
> # but it will not be allowed to change them. If it tries it will
> # receive a protocol error.
>
> # Option "DisableVidModeExtension"
>
> # Uncomment this to enable the use of a non-local xvidtune client.
> # Option "AllowNonLocalXvidtune"
>
> # Uncomment this to disable dynamically modifying the input device
> # (mouse and keyboard) settings.
> # Option "DisableModInDev"
>
> # Uncomment this to enable the use of a non-local client to
> # change the keyboard or mouse settings (currently only xset).
>
> # Option "AllowNonLocalModInDev"
>
> EndSection
>
> # **********************************************************************
> # Input devices
> # **********************************************************************
>
> # **********************************************************************
> # Core keyboard's InputDevice section
> # **********************************************************************
>
> Section "InputDevice"
>
> Identifier "Keyboard1"
> Driver "kbd"
>
> Option "AutoRepeat" "500 30"
>
> # Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
> # Option "Xleds" "1 2 3"
>
> # Option "LeftAlt" "Meta"
> # Option "RightAlt" "ModeShift"
>
> # To customise the XKB settings to suit your keyboard, modify the
> # lines below (which are the defaults). For example, for a non-U.S.
> # keyboard, you will probably want to use:
> # Option "XkbModel" "pc105"
> # If you have a US Microsoft Natural keyboard, you can use:
> # Option "XkbModel" "microsoft"
> #
> # Then to change the language, change the Layout setting.
> # For example, a german layout can be obtained with:
> # Option "XkbLayout" "de"
> # or:
> # Option "XkbLayout" "de"
> # Option "XkbVariant" "nodeadkeys"
> #
> # If you'd like to switch the positions of your capslock and
> # control keys, use:
> # Option "XkbOptions" "ctrl:swapcaps"
>
> # These are the default XKB settings for Xorg
> # Option "XkbRules" "xorg"
> # Option "XkbModel" "pc105"
> # Option "XkbLayout" "us"
> # Option "XkbVariant" ""
> # Option "XkbOptions" ""
>
> # Option "XkbDisable"
>
> Option "XkbRules" "xorg"
> Option "XkbModel" "pc104"
> Option "XkbLayout" "us"
>
> EndSection
>
>
> # **********************************************************************
> # Core Pointer's InputDevice section
> # **********************************************************************
>
> Section "InputDevice"
>
> # Identifier and driver
>
> Identifier "Mouse1"
> Driver "mouse"
> Option "Protocol" "Auto" # Auto detect
> Option "Device" "/dev/wsmouse"
>
> # Mouse-speed setting for PS/2 mouse.
>
> # Option "Resolution" "256"
>
> # Baudrate and SampleRate are only for some Logitech mice. In
> # almost every case these lines should be omitted.
>
> # Option "BaudRate" "9600"
> # Option "SampleRate" "150"
>
> # Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5,
> # horizontal wheel to buttons 6 & 7. Change if your mouse has more than
> # 3 buttons and you need to map the wheel to different button ids to avoid
> # conflicts.
>
> Option "ZAxisMapping" "4 5 6 7"
>
> # Emulate3Buttons is an option for 2-button mice
> # Emulate3Timeout is the timeout in milliseconds (default is 50ms)
>
> Option "Emulate3Buttons"
> # Option "Emulate3Timeout" "50"
>
> # ChordMiddle is an option for some 3-button Logitech mice
>
> # Option "ChordMiddle"
>
> # ZaxisMapping is an option for handling the wheel
> Option "ZAxisMapping" "4 5"
>
> EndSection
>
>
> # **********************************************************************
> # Other input device sections # this is optional and is required only if
you
> # are using extended input devices. This is for example only. Refer
> # to the xorg.conf man page for a description of the options.
> # **********************************************************************
> #
> # Section "InputDevice" # Identifier "Mouse2"
> # Driver "mouse"
> # Option "Protocol" "MouseMan"
> # Option "Device" "/dev/mouse2"
> # EndSection
> #
> # Section "InputDevice"
> # Identifier "spaceball"
> # Driver "magellan"
> # Option "Device" "/dev/cua0"
> # EndSection
> #
> # Section "InputDevice"
> # Identifier "spaceball2"
> # Driver "spaceorb"
> # Option "Device" "/dev/cua0"
> # EndSection
> #
> # Section "InputDevice"
> # Identifier "touchscreen0"
> # Driver "microtouch"
> # Option "Device" "/dev/ttyS0"
> # Option "MinX" "1412"
> # Option "MaxX" "15184"
> # Option "MinY" "15372"
> # Option "MaxY" "1230"
> # Option "ScreenNumber" "0"
> # Option "ReportingMode" "Scaled"
> # Option "ButtonNumber" "1"
> # Option "SendCoreEvents"
> # EndSection
> #
> # Section "InputDevice"
> # Identifier "touchscreen1"
> # Driver "elo2300"
> # Option "Device" "/dev/ttyS0"
> # Option "MinX" "231"
> # Option "MaxX" "3868"
> # Option "MinY" "3858"
> # Option "MaxY" "272"
> # Option "ScreenNumber" "0"
> # Option "ReportingMode" "Scaled"
> # Option "ButtonThreshold" "17"
> # Option "ButtonNumber" "1"
> # Option "SendCoreEvents"
> # EndSection
>
> # **********************************************************************
> # Monitor section
> # **********************************************************************
>
> # Any number of monitor sections may be present
>
> Section "Monitor"
>
> Identifier "17inch, Mitsubishi, Diamond Pro"
>
> # HorizSync is in kHz unless units are specified.
> # HorizSync may be a comma separated list of discrete values, or a
> # comma separated list of ranges of values.
> # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
> # USER MANUAL FOR THE CORRECT NUMBERS.
>
> HorizSync 30-86
>
> # HorizSync 30-64 # multisync
> # HorizSync 31.5, 35.2 # multiple fixed sync frequencies
> # HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
>
> # VertRefresh is in Hz unless units are specified.
> # VertRefresh may be a comma separated list of discrete values, or a
> # comma separated list of ranges of values.
> # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
> # USER MANUAL FOR THE CORRECT NUMBERS.
>
> VertRefresh 50-130
>
> EndSection
>
>
> # **********************************************************************
> # Graphics device section
> # **********************************************************************
>
> # Any number of graphics device sections may be present
>
> # Standard VGA Device:
>
> Section "Device"
> Identifier "Standard VGA"
> VendorName "Unknown"
> BoardName "Unknown"
>
> # The chipset line is optional in most cases. It can be used to override
> # the driver's chipset detection, and should not normally be specified.
>
> # Chipset "generic"
>
> # The Driver line must be present. When using run-time loadable driver
> # modules, this line instructs the server to load the specified driver
> # module. Even when not using loadable driver modules, this line
> # indicates which driver should interpret the information in this section.
>
> Driver "vga"
> #Driver "vesa"
> # The BusID line is used to specify which of possibly multiple devices
> # this section is intended for. When this line isn't present, a device
> # section can only match up with the primary video device. For PCI
> # devices a line like the following could be used. This line should not
> # normally be included unless there is more than one video device
> # intalled.
>
> # BusID "PCI:0:10:0"
>
> # VideoRam 256
>
> # Clocks 25.2 28.3
>
> EndSection
>
> # Device configured by xorgconfig:
>
> Section "Device"
> Identifier "ATI Mach64"
> #Driver "ati"
> Driver "mach64"
> #Driver "vesa"
> #VideoRam 4096
> # Insert Clocks lines here if appropriate
> EndSection
>
>
> # **********************************************************************
> # Screen sections
> # **********************************************************************
>
> # Any number of screen sections may be present. Each describes
> # the configuration of a single screen. A single specific screen section
> # may be specified from the X server command line with the "-screen"
> # option.
> Section "Screen"
> Identifier "Screen 1"
> Device "ATI Mach64"
> Monitor "17inch, Mitsubishi, Diamond Pro"
> DefaultDepth 16
>
> Subsection "Display"
> Depth 8
> Modes "1280x1024" "1024x768" "800x600"
> ViewPort 0 0
> EndSubsection
> Subsection "Display"
> Depth 16
> Modes "1152x864" "1024x768" "800x600"
> ViewPort 0 0
> EndSubsection
> Subsection "Display"
> Depth 16
> Modes "1152x864" "1024x768" "800x600"
> ViewPort 0 0
> Virtual 1152 864
> EndSubsection
> EndSection
>
> # **********************************************************************
> # ServerLayout sections.
> # **********************************************************************
>
> # Any number of ServerLayout sections may be present. Each describes
> # the way multiple screens are organised. A specific ServerLayout
> # section may be specified from the X server command line with the
> # "-layout" option. In the absence of this, the first section is used.
> # When now ServerLayout section is present, the first Screen section
> # is used alone.
>
> Section "ServerLayout"
>
> # The Identifier line must be present
> Identifier "Simple Layout"
>
> # Each Screen line specifies a Screen section name, and optionally
> # the relative position of other screens. The four names after
> # primary screen name are the screens to the top, bottom, left and right
> # of the primary screen. In this example, screen 2 is located to the
> # right of screen 1.
>
> Screen "Screen 1"
>
> # Each InputDevice line specifies an InputDevice section name and
> # optionally some options to specify the way the device is to be
> # used. Those options include "CorePointer", "CoreKeyboard" and
> # "SendCoreEvents".
>
> InputDevice "Mouse1" "CorePointer"
> InputDevice "Keyboard1" "CoreKeyboard"
>
> EndSection
>
> # Section "DRI"
> # Mode 0666
> # EndSection
>
> Xorg.0.log (vesa vesa)
>
> (--) checkDevMem: using aperture driver /dev/xf86
> (--) Using wscons driver on /dev/ttyC4 in pcvt compatibility mode (version
> 3.32)
>
> X.Org X Server 1.6.5
> Release Date: 2009-10-11
> X Protocol Version 11, Revision 0
> Build Operating System: OpenBSD 4.6 i386 Current Operating System: OpenBSD
> gemini.wss-ds.org 4.6 GENERIC#353 i386
> Build Date: 31 October 2009 10:05:44PM
> Before reporting problems, check http://wiki.x.org
> to make sure that you have the latest version.
> Markers: (--) probed, (**) from config file, (==) default setting,
> (++) from command line, (!!) notice, (II) informational,
> (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> (==) Log file: "/var/log/Xorg.0.log", Time: Thu Nov 5 18:16:58 2009
> (==) Using config file: "/etc/X11/xorg.conf"
> (==) ServerLayout "Simple Layout"
> (**) |-->Screen "Screen 1" (0)
> (**) | |-->Monitor "17inch, Mitsubishi, Diamond Pro"
> (**) | |-->Device "ATI Mach64"
> (**) |-->Input Device "Mouse1"
> (**) |-->Input Device "Keyboard1"
> (==) Not automatically adding devices
> (==) Not automatically enabling devices
> (**) FontPath set to:
> /usr/X11R6/lib/X11/fonts/misc/,
> /usr/X11R6/lib/X11/fonts/TTF/,
> /usr/X11R6/lib/X11/fonts/OTF,
> /usr/X11R6/lib/X11/fonts/Type1/,
> /usr/X11R6/lib/X11/fonts/100dpi/,
> /usr/X11R6/lib/X11/fonts/75dpi/,
> /usr/X11R6/lib/X11/fonts/local/,
> /usr/local/lib/X11/fonts/mscorefonts/,
> /usr/local/lib/X11/fonts/ghostscript/,
> /usr/X11R6/lib/X11/fonts/misc/,
> /usr/X11R6/lib/X11/fonts/TTF/,
> /usr/X11R6/lib/X11/fonts/OTF,
> /usr/X11R6/lib/X11/fonts/Type1/,
> /usr/X11R6/lib/X11/fonts/100dpi/,
> /usr/X11R6/lib/X11/fonts/75dpi/
> (==) ModulePath set to "/usr/X11R6/lib/modules"
> (II) Loader magic: 0x1dc0
> (II) Module ABI versions:
> X.Org ANSI C Emulation: 0.4
> X.Org Video Driver: 5.0
> X.Org XInput driver : 4.0
> X.Org Server Extension : 2.0
> (II) Loader running on openbsd
> (II) System resource ranges:
> [0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [3] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [4] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> (II) "extmod" will be loaded. This was enabled by default and also
specified
> in the config file.
> (II) "dbe" will be loaded. This was enabled by default and also specified
in
> the config file.
> (II) "glx" will be loaded by default.
> (II) "dri" will be loaded by default.
> (II) "dri2" will be loaded by default.
> (II) LoadModule: "dbe"
> (II) Loading /usr/X11R6/lib/modules/extensions//libdbe.so
> (II) Module dbe: vendor="X.Org Foundation"
> compiled for 1.6.5, module version = 1.0.0
> Module class: X.Org Server Extension
> ABI class: X.Org Server Extension, version 2.0
> (II) Loading extension DOUBLE-BUFFER
> (II) LoadModule: "extmod"
> (II) Loading /usr/X11R6/lib/modules/extensions//libextmod.so
> (II) Module extmod: vendor="X.Org Foundation"
> compiled for 1.6.5, module version = 1.0.0
> Module class: X.Org Server Extension
> ABI class: X.Org Server Extension, version 2.0
> (II) Loading extension MIT-SCREEN-SAVER
> (II) Loading extension XFree86-VidModeExtension
> (II) Loading extension DPMS
> (II) Loading extension XVideo
> (II) Loading extension XVideo-MotionCompensation
> (II) Loading extension X-Resource
> (II) LoadModule: "freetype"
> (WW) Warning, couldn't open module freetype
> (II) UnloadModule: "freetype"
> (EE) Failed to load module "freetype" (module does not exist, 0)
> (II) LoadModule: "glx"
> (II) Loading /usr/X11R6/lib/modules/extensions//libglx.so
> (II) Module glx: vendor="X.Org Foundation"
> compiled for 1.6.5, module version = 1.0.0
> ABI class: X.Org Server Extension, version 2.0
> (==) AIGLX enabled
> (II) Loading extension GLX
> (II) LoadModule: "dri"
> (II) Loading /usr/X11R6/lib/modules/extensions//libdri.so
> (II) Module dri: vendor="X.Org Foundation"
> compiled for 1.6.5, module version = 1.0.0
> ABI class: X.Org Server Extension, version 2.0
> (II) Loading extension XFree86-DRI
> (II) LoadModule: "dri2"
> (II) Loading /usr/X11R6/lib/modules/extensions//libdri2.so
> (II) Module dri2: vendor="X.Org Foundation"
> compiled for 1.6.5, module version = 1.1.0
> ABI class: X.Org Server Extension, version 2.0
> (II) Loading extension DRI2
> (II) LoadModule: "vesa"
> (II) Loading /usr/X11R6/lib/modules/drivers//vesa_drv.so
> (II) Module vesa: vendor="X.Org Foundation"
> compiled for 1.6.5, module version = 2.2.0
> Module class: X.Org Video Driver
> ABI class: X.Org Video Driver, version 5.0
> (II) LoadModule: "mouse"
> (II) Loading /usr/X11R6/lib/modules/input//mouse_drv.so
> (II) Module mouse: vendor="X.Org Foundation"
> compiled for 1.6.5, module version = 1.4.0
> Module class: X.Org XInput Driver
> ABI class: X.Org XInput driver, version 4.0
> (II) LoadModule: "kbd"
> (II) Loading /usr/X11R6/lib/modules/input//kbd_drv.so
> (II) Module kbd: vendor="X.Org Foundation"
> compiled for 1.6.5, module version = 1.3.2
> Module class: X.Org XInput Driver
> ABI class: X.Org XInput driver, version 4.0
> (II) VESA: driver for VESA chipsets: vesa
> (WW) Falling back to old probe method for vesa
> (EE) No devices detected.
>
> Fatal server error:
> no screens found
>
> Please consult the The X.Org Foundation support at
http://wiki.x.org
> for help. Please also check the log file at "/var/log/Xorg.0.log" for
> additional information.
>
> Xorg.0.log (vesa mach64)
>
> (--) checkDevMem: using aperture driver /dev/xf86
> (--) Using wscons driver on /dev/ttyC4 in pcvt compatibility mode (version
> 3.32)
>
> X.Org X Server 1.6.5
> Release Date: 2009-10-11
> X Protocol Version 11, Revision 0
> Build Operating System: OpenBSD 4.6 i386 Current Operating System: OpenBSD
> gemini.wss-ds.org 4.6 GENERIC#353 i386
> Build Date: 31 October 2009 10:05:44PM
> Before reporting problems, check http://wiki.x.org
> to make sure that you have the latest version.
> Markers: (--) probed, (**) from config file, (==) default setting,
> (++) from command line, (!!) notice, (II) informational,
> (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> (==) Log file: "/var/log/Xorg.0.log", Time: Thu Nov 5 18:18:13 2009
> (==) Using config file: "/etc/X11/xorg.conf"
> (==) ServerLayout "Simple Layout"
> (**) |-->Screen "Screen 1" (0)
> (**) | |-->Monitor "17inch, Mitsubishi, Diamond Pro"
> (**) | |-->Device "ATI Mach64"
> (**) |-->Input Device "Mouse1"
> (**) |-->Input Device "Keyboard1"
> (==) Not automatically adding devices
> (==) Not automatically enabling devices
> (**) FontPath set to:
> /usr/X11R6/lib/X11/fonts/misc/,
> /usr/X11R6/lib/X11/fonts/TTF/,
> /usr/X11R6/lib/X11/fonts/OTF,
> /usr/X11R6/lib/X11/fonts/Type1/,
> /usr/X11R6/lib/X11/fonts/100dpi/,
> /usr/X11R6/lib/X11/fonts/75dpi/,
> /usr/X11R6/lib/X11/fonts/local/,
> /usr/local/lib/X11/fonts/mscorefonts/,
> /usr/local/lib/X11/fonts/ghostscript/,
> /usr/X11R6/lib/X11/fonts/misc/,
> /usr/X11R6/lib/X11/fonts/TTF/,
> /usr/X11R6/lib/X11/fonts/OTF,
> /usr/X11R6/lib/X11/fonts/Type1/,
> /usr/X11R6/lib/X11/fonts/100dpi/,
> /usr/X11R6/lib/X11/fonts/75dpi/
> (==) ModulePath set to "/usr/X11R6/lib/modules"
> (II) Loader magic: 0x1dc0
> (II) Module ABI versions:
> X.Org ANSI C Emulation: 0.4
> X.Org Video Driver: 5.0
> X.Org XInput driver : 4.0
> X.Org Server Extension : 2.0
> (II) Loader running on openbsd
> (II) System resource ranges:
> [0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [3] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [4] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> (II) "extmod" will be loaded. This was enabled by default and also
specified
> in the config file.
> (II) "dbe" will be loaded. This was enabled by default and also specified
in
> the config file.
> (II) "glx" will be loaded by default.
> (II) "dri" will be loaded by default.
> (II) "dri2" will be loaded by default.
> (II) LoadModule: "dbe"
> (II) Loading /usr/X11R6/lib/modules/extensions//libdbe.so
> (II) Module dbe: vendor="X.Org Foundation"
> compiled for 1.6.5, module version = 1.0.0
> Module class: X.Org Server Extension
> ABI class: X.Org Server Extension, version 2.0
> (II) Loading extension DOUBLE-BUFFER
> (II) LoadModule: "extmod"
> (II) Loading /usr/X11R6/lib/modules/extensions//libextmod.so
> (II) Module extmod: vendor="X.Org Foundation"
> compiled for 1.6.5, module version = 1.0.0
> Module class: X.Org Server Extension
> ABI class: X.Org Server Extension, version 2.0
> (II) Loading extension MIT-SCREEN-SAVER
> (II) Loading extension XFree86-VidModeExtension
> (II) Loading extension DPMS
> (II) Loading extension XVideo
> (II) Loading extension XVideo-MotionCompensation
> (II) Loading extension X-Resource
> (II) LoadModule: "freetype"
> (WW) Warning, couldn't open module freetype
> (II) UnloadModule: "freetype"
> (EE) Failed to load module "freetype" (module does not exist, 0)
> (II) LoadModule: "glx"
> (II) Loading /usr/X11R6/lib/modules/extensions//libglx.so
> (II) Module glx: vendor="X.Org Foundation"
> compiled for 1.6.5, module version = 1.0.0
> ABI class: X.Org Server Extension, version 2.0
> (==) AIGLX enabled
> (II) Loading extension GLX
> (II) LoadModule: "dri"
> (II) Loading /usr/X11R6/lib/modules/extensions//libdri.so
> (II) Module dri: vendor="X.Org Foundation"
> compiled for 1.6.5, module version = 1.0.0
> ABI class: X.Org Server Extension, version 2.0
> (II) Loading extension XFree86-DRI
> (II) LoadModule: "dri2"
> (II) Loading /usr/X11R6/lib/modules/extensions//libdri2.so
> (II) Module dri2: vendor="X.Org Foundation"
> compiled for 1.6.5, module version = 1.1.0
> ABI class: X.Org Server Extension, version 2.0
> (II) Loading extension DRI2
> (II) LoadModule: "mach64"
> (II) Loading /usr/X11R6/lib/modules/drivers//mach64_drv.so
> (II) Module mach64: vendor="X.Org Foundation"
> compiled for 1.6.5, module version = 6.8.0
> Module class: X.Org Video Driver
> ABI class: X.Org Video Driver, version 5.0
> (II) LoadModule: "mouse"
> (II) Loading /usr/X11R6/lib/modules/input//mouse_drv.so
> (II) Module mouse: vendor="X.Org Foundation"
> compiled for 1.6.5, module version = 1.4.0
> Module class: X.Org XInput Driver
> ABI class: X.Org XInput driver, version 4.0
> (II) LoadModule: "kbd"
> (II) Loading /usr/X11R6/lib/modules/input//kbd_drv.so
> (II) Module kbd: vendor="X.Org Foundation"
> compiled for 1.6.5, module version = 1.3.2
> Module class: X.Org XInput Driver
> ABI class: X.Org XInput driver, version 4.0
> (II) MACH64: Driver for ATI Mach64 chipsets
> (EE) No devices detected.
>
> Fatal server error:
> no screens found
>
> Please consult the The X.Org Foundation support at
http://wiki.x.org
> for help. Please also check the log file at "/var/log/Xorg.0.log" for
> additional information.
>
> Xorg.0.log (vga vesa)
>
> (--) checkDevMem: using aperture driver /dev/xf86
> (--) Using wscons driver on /dev/ttyC4 in pcvt compatibility mode (version
> 3.32)
>
> X.Org X Server 1.6.5
> Release Date: 2009-10-11
> X Protocol Version 11, Revision 0
> Build Operating System: OpenBSD 4.6 i386 Current Operating System: OpenBSD
> gemini.wss-ds.org 4.6 GENERIC#353 i386
> Build Date: 31 October 2009 10:05:44PM
> Before reporting problems, check http://wiki.x.org
> to make sure that you have the latest version.
> Markers: (--) probed, (**) from config file, (==) default setting,
> (++) from command line, (!!) notice, (II) informational,
> (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> (==) Log file: "/var/log/Xorg.0.log", Time: Thu Nov 5 18:19:01 2009
> (==) Using config file: "/etc/X11/xorg.conf"
> (==) ServerLayout "Simple Layout"
> (**) |-->Screen "Screen 1" (0)
> (**) | |-->Monitor "17inch, Mitsubishi, Diamond Pro"
> (**) | |-->Device "ATI Mach64"
> (**) |-->Input Device "Mouse1"
> (**) |-->Input Device "Keyboard1"
> (==) Not automatically adding devices
> (==) Not automatically enabling devices
> (**) FontPath set to:
> /usr/X11R6/lib/X11/fonts/misc/,
> /usr/X11R6/lib/X11/fonts/TTF/,
> /usr/X11R6/lib/X11/fonts/OTF,
> /usr/X11R6/lib/X11/fonts/Type1/,
> /usr/X11R6/lib/X11/fonts/100dpi/,
> /usr/X11R6/lib/X11/fonts/75dpi/,
> /usr/X11R6/lib/X11/fonts/local/,
> /usr/local/lib/X11/fonts/mscorefonts/,
> /usr/local/lib/X11/fonts/ghostscript/,
> /usr/X11R6/lib/X11/fonts/misc/,
> /usr/X11R6/lib/X11/fonts/TTF/,
> /usr/X11R6/lib/X11/fonts/OTF,
> /usr/X11R6/lib/X11/fonts/Type1/,
> /usr/X11R6/lib/X11/fonts/100dpi/,
> /usr/X11R6/lib/X11/fonts/75dpi/
> (==) ModulePath set to "/usr/X11R6/lib/modules"
> (II) Loader magic: 0x1dc0
> (II) Module ABI versions:
> X.Org ANSI C Emulation: 0.4
> X.Org Video Driver: 5.0
> X.Org XInput driver : 4.0
> X.Org Server Extension : 2.0
> (II) Loader running on openbsd
> (II) System resource ranges:
> [0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [3] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [4] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> (II) "extmod" will be loaded. This was enabled by default and also
specified
> in the config file.
> (II) "dbe" will be loaded. This was enabled by default and also specified
in
> the config file.
> (II) "glx" will be loaded by default.
> (II) "dri" will be loaded by default.
> (II) "dri2" will be loaded by default.
> (II) LoadModule: "dbe"
> (II) Loading /usr/X11R6/lib/modules/extensions//libdbe.so
> (II) Module dbe: vendor="X.Org Foundation"
> compiled for 1.6.5, module version = 1.0.0
> Module class: X.Org Server Extension
> ABI class: X.Org Server Extension, version 2.0
> (II) Loading extension DOUBLE-BUFFER
> (II) LoadModule: "extmod"
> (II) Loading /usr/X11R6/lib/modules/extensions//libextmod.so
> (II) Module extmod: vendor="X.Org Foundation"
> compiled for 1.6.5, module version = 1.0.0
> Module class: X.Org Server Extension
> ABI class: X.Org Server Extension, version 2.0
> (II) Loading extension MIT-SCREEN-SAVER
> (II) Loading extension XFree86-VidModeExtension
> (II) Loading extension DPMS
> (II) Loading extension XVideo
> (II) Loading extension XVideo-MotionCompensation
> (II) Loading extension X-Resource
> (II) LoadModule: "freetype"
> (WW) Warning, couldn't open module freetype
> (II) UnloadModule: "freetype"
> (EE) Failed to load module "freetype" (module does not exist, 0)
> (II) LoadModule: "glx"
> (II) Loading /usr/X11R6/lib/modules/extensions//libglx.so
> (II) Module glx: vendor="X.Org Foundation"
> compiled for 1.6.5, module version = 1.0.0
> ABI class: X.Org Server Extension, version 2.0
> (==) AIGLX enabled
> (II) Loading extension GLX
> (II) LoadModule: "dri"
> (II) Loading /usr/X11R6/lib/modules/extensions//libdri.so
> (II) Module dri: vendor="X.Org Foundation"
> compiled for 1.6.5, module version = 1.0.0
> ABI class: X.Org Server Extension, version 2.0
> (II) Loading extension XFree86-DRI
> (II) LoadModule: "dri2"
> (II) Loading /usr/X11R6/lib/modules/extensions//libdri2.so
> (II) Module dri2: vendor="X.Org Foundation"
> compiled for 1.6.5, module version = 1.1.0
> ABI class: X.Org Server Extension, version 2.0
> (II) Loading extension DRI2
> (II) LoadModule: "vesa"
> (II) Loading /usr/X11R6/lib/modules/drivers//vesa_drv.so
> (II) Module vesa: vendor="X.Org Foundation"
> compiled for 1.6.5, module version = 2.2.0
> Module class: X.Org Video Driver
> ABI class: X.Org Video Driver, version 5.0
> (II) LoadModule: "mouse"
> (II) Loading /usr/X11R6/lib/modules/input//mouse_drv.so
> (II) Module mouse: vendor="X.Org Foundation"
> compiled for 1.6.5, module version = 1.4.0
> Module class: X.Org XInput Driver
> ABI class: X.Org XInput driver, version 4.0
> (II) LoadModule: "kbd"
> (II) Loading /usr/X11R6/lib/modules/input//kbd_drv.so
> (II) Module kbd: vendor="X.Org Foundation"
> compiled for 1.6.5, module version = 1.3.2
> Module class: X.Org XInput Driver
> ABI class: X.Org XInput driver, version 4.0
> (II) VESA: driver for VESA chipsets: vesa
> (WW) Falling back to old probe method for vesa
> (EE) No devices detected.
>
> Fatal server error:
> no screens found
>
> Please consult the The X.Org Foundation support at
http://wiki.x.org
> for help. Please also check the log file at "/var/log/Xorg.0.log" for
> additional information.
>
> Xorg.0.log (vga mach64)
>
> (--) checkDevMem: using aperture driver /dev/xf86
> (--) Using wscons driver on /dev/ttyC4 in pcvt compatibility mode (version
> 3.32)
>
> X.Org X Server 1.6.5
> Release Date: 2009-10-11
> X Protocol Version 11, Revision 0
> Build Operating System: OpenBSD 4.6 i386 Current Operating System: OpenBSD
> gemini.wss-ds.org 4.6 GENERIC#353 i386
> Build Date: 31 October 2009 10:05:44PM
> Before reporting problems, check http://wiki.x.org
> to make sure that you have the latest version.
> Markers: (--) probed, (**) from config file, (==) default setting,
> (++) from command line, (!!) notice, (II) informational,
> (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> (==) Log file: "/var/log/Xorg.0.log", Time: Thu Nov 5 18:19:33 2009
> (==) Using config file: "/etc/X11/xorg.conf"
> (==) ServerLayout "Simple Layout"
> (**) |-->Screen "Screen 1" (0)
> (**) | |-->Monitor "17inch, Mitsubishi, Diamond Pro"
> (**) | |-->Device "ATI Mach64"
> (**) |-->Input Device "Mouse1"
> (**) |-->Input Device "Keyboard1"
> (==) Not automatically adding devices
> (==) Not automatically enabling devices
> (**) FontPath set to:
> /usr/X11R6/lib/X11/fonts/misc/,
> /usr/X11R6/lib/X11/fonts/TTF/,
> /usr/X11R6/lib/X11/fonts/OTF,
> /usr/X11R6/lib/X11/fonts/Type1/,
> /usr/X11R6/lib/X11/fonts/100dpi/,
> /usr/X11R6/lib/X11/fonts/75dpi/,
> /usr/X11R6/lib/X11/fonts/local/,
> /usr/local/lib/X11/fonts/mscorefonts/,
> /usr/local/lib/X11/fonts/ghostscript/,
> /usr/X11R6/lib/X11/fonts/misc/,
> /usr/X11R6/lib/X11/fonts/TTF/,
> /usr/X11R6/lib/X11/fonts/OTF,
> /usr/X11R6/lib/X11/fonts/Type1/,
> /usr/X11R6/lib/X11/fonts/100dpi/,
> /usr/X11R6/lib/X11/fonts/75dpi/
> (==) ModulePath set to "/usr/X11R6/lib/modules"
> (II) Loader magic: 0x1dc0
> (II) Module ABI versions:
> X.Org ANSI C Emulation: 0.4
> X.Org Video Driver: 5.0
> X.Org XInput driver : 4.0
> X.Org Server Extension : 2.0
> (II) Loader running on openbsd
> (II) System resource ranges:
> [0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [3] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [4] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> (II) "extmod" will be loaded. This was enabled by default and also
specified
> in the config file.
> (II) "dbe" will be loaded. This was enabled by default and also specified
in
> the config file.
> (II) "glx" will be loaded by default.
> (II) "dri" will be loaded by default.
> (II) "dri2" will be loaded by default.
> (II) LoadModule: "dbe"
> (II) Loading /usr/X11R6/lib/modules/extensions//libdbe.so
> (II) Module dbe: vendor="X.Org Foundation"
> compiled for 1.6.5, module version = 1.0.0
> Module class: X.Org Server Extension
> ABI class: X.Org Server Extension, version 2.0
> (II) Loading extension DOUBLE-BUFFER
> (II) LoadModule: "extmod"
> (II) Loading /usr/X11R6/lib/modules/extensions//libextmod.so
> (II) Module extmod: vendor="X.Org Foundation"
> compiled for 1.6.5, module version = 1.0.0
> Module class: X.Org Server Extension
> ABI class: X.Org Server Extension, version 2.0
> (II) Loading extension MIT-SCREEN-SAVER
> (II) Loading extension XFree86-VidModeExtension
> (II) Loading extension DPMS
> (II) Loading extension XVideo
> (II) Loading extension XVideo-MotionCompensation
> (II) Loading extension X-Resource
> (II) LoadModule: "freetype"
> (WW) Warning, couldn't open module freetype
> (II) UnloadModule: "freetype"
> (EE) Failed to load module "freetype" (module does not exist, 0)
> (II) LoadModule: "glx"
> (II) Loading /usr/X11R6/lib/modules/extensions//libglx.so
> (II) Module glx: vendor="X.Org Foundation"
> compiled for 1.6.5, module version = 1.0.0
> ABI class: X.Org Server Extension, version 2.0
> (==) AIGLX enabled
> (II) Loading extension GLX
> (II) LoadModule: "dri"
> (II) Loading /usr/X11R6/lib/modules/extensions//libdri.so
> (II) Module dri: vendor="X.Org Foundation"
> compiled for 1.6.5, module version = 1.0.0
> ABI class: X.Org Server Extension, version 2.0
> (II) Loading extension XFree86-DRI
> (II) LoadModule: "dri2"
> (II) Loading /usr/X11R6/lib/modules/extensions//libdri2.so
> (II) Module dri2: vendor="X.Org Foundation"
> compiled for 1.6.5, module version = 1.1.0
> ABI class: X.Org Server Extension, version 2.0
> (II) Loading extension DRI2
> (II) LoadModule: "mach64"
> (II) Loading /usr/X11R6/lib/modules/drivers//mach64_drv.so
> (II) Module mach64: vendor="X.Org Foundation"
> compiled for 1.6.5, module version = 6.8.0
> Module class: X.Org Video Driver
> ABI class: X.Org Video Driver, version 5.0
> (II) LoadModule: "mouse"
> (II) Loading /usr/X11R6/lib/modules/input//mouse_drv.so
> (II) Module mouse: vendor="X.Org Foundation"
> compiled for 1.6.5, module version = 1.4.0
> Module class: X.Org XInput Driver
> ABI class: X.Org XInput driver, version 4.0
> (II) LoadModule: "kbd"
> (II) Loading /usr/X11R6/lib/modules/input//kbd_drv.so
> (II) Module kbd: vendor="X.Org Foundation"
> compiled for 1.6.5, module version = 1.3.2
> Module class: X.Org XInput Driver
> ABI class: X.Org XInput driver, version 4.0
> (II) MACH64: Driver for ATI Mach64 chipsets
> (EE) No devices detected.
>
> Fatal server error:
> no screens found
>
> Please consult the The X.Org Foundation support at
http://wiki.x.org
> for help. Please also check the log file at "/var/log/Xorg.0.log" for
> additional information.
>
>
> --
> W. Steven Schneider <w.steven.schnei...@ualberta.net>
>
>
--
Matthieu Herrb
