On Fri, Oct 23, 2009 at 11:08 AM, FRLinux <frli...@gmail.com> wrote:
> Hello
>
> I have generated a verbose trace using a com port on the server, this
> is by booting the official 4.6 i386 install CD.
Alright, disabling ACPI allows me to install the system, but then on
reboot, even disabling ACPI makes the system restart:
boot> boot -c
booting hd0a:/bsd: 6563548+1052072 [52+345584+327881]=0x7e7ce8
entry point at 0x200120
[ using 673892 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2009 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 4.6 (GENERIC) #58: Thu Jul 9 21:24:42 MDT 2009
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Xeon(TM) CPU 3.20GHz ("GenuineIntel" 686-class) 3.21 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CR
real mem = 3623231488 (3455MB)
avail mem = 3516555264 (3353MB)
User Kernel Config
UKC> disable acpi
466 acpi0 disabled
UKC> quit
Continuing...
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 02/15/07, BIOS32 rev. 0 @ 0xfd6f1, SMBIOS)
bios0: vendor IBM version "-[APE137AUS-1.14]-" date 02/15/2007
bios0: IBM eserver xSeries 336 -[883722Y]-
acpi at bios0 function 0x0 not configured
mpbios0 at bios0: Intel MP Specification 1.4
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 200MHz
cpu at mainbus0: not configured
mpbios0: bus 0 is type PCI
mpbios0: bus 1 is type PCI
mpbios0: bus 2 is type PCI
mpbios0: bus 3 is type PCI
mpbios0: bus 4 is type PCI
mpbios0: bus 5 is type PCI
mpbios0: bus 6 is type PCI
mpbios0: bus 7 is type PCI
mpbios0: bus 8 is type ISA
ioapic0 at mainbus0: apid 14 pa 0xfec00000, version 20, 24 pins
ioapic1 at mainbus0: apid 13 pa 0xfec82000, version 20, 24 pins
ioapic2 at mainbus0: apid 12 pa 0xfec82400, version 20, 24 pins
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xffff
pcibios0: PCI BIOS has 11 Interrupt Routing table entries
pcibios0: PCI Exclusive IRQs: 9 10 11 15
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801EB/ER LPC" rev 0x00)
pcibios0: PCI bus #7 is the last bus
bios0: ROM list: 0xc0000/0xb000
ipmi at mainbus0 not configured
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
mem address conflict 0xff000000/0x1000
pchb0 at pci0 dev 0 function 0 "Intel E7520 Host" rev 0x0c
"Intel E7520 Error Reporting" rev 0x0c at pci0 dev 0 function 1 not configured
ppb0 at pci0 dev 2 function 0 "Intel E7520 PCIE" rev 0x0c
pci1 at ppb0 bus 2
ppb1 at pci0 dev 4 function 0 "Intel E7520 PCIE" rev 0x0c
pci2 at ppb1 bus 3
ppb2 at pci2 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
pci3 at ppb2 bus 4
ppb3 at pci2 dev 0 function 2 "Intel PCIE-PCIE" rev 0x09
pci4 at ppb3 bus 5
ppb4 at pci0 dev 6 function 0 "Intel E7520 PCIE" rev 0x0c
pci5 at ppb4 bus 6
bge0 at pci5 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1 (0x4101):e
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb5 at pci0 dev 7 function 0 "Intel E7520 PCIE" rev 0x0c
pci6 at ppb5 bus 7
bge1 at pci6 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1 (0x4101):f
brgphy1 at bge1 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
"Intel E7520 Config" rev 0x0c at pci0 dev 8 function 0 not configured
uhci0 at pci0 dev 29 function 0 "Intel 82801EB/ER USB" rev 0x02: apic 14 int 16)
uhci1 at pci0 dev 29 function 1 "Intel 82801EB/ER USB" rev 0x02: apic 14 int 19)
ehci0 at pci0 dev 29 function 7 "Intel 82801EB/ER USB2" rev 0x02: apic 14 int 2)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb6 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xc2
pci7 at ppb6 bus 1
vga1 at pci7 dev 1 function 0 "ATI Radeon VE" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
***reboots after that line...***
