Hello,
When I boot my machine off of the 4.5 or 4.6 install CD, it powers off
(hard) right before getting to the Install/Upgrade/Shell prompt. I've
been running it with 4.4 without any difficulties for quite some time.
I've found that if I use boot -c and "disable usb", it appears to work
find. However, I'd quite like to use USB.
Does anyone have idea what's wrong, and how I can fix it?
My dmesg from my 4.4 system is included below. (And, yes, I know I have
some RAID issues at the moment).
Thanks,
-Larry
OpenBSD 4.4 (abzu) #0: Fri Oct 16 14:33:27 CDT 2009
r...@abzu.impendingjune.net:/usr/src/sys/arch/i386/compile/abzu
cpu0: Intel(R) Pentium(R) 4 CPU 2.80GHz ("GenuineIntel" 686-class) 2.82 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR
real mem = 2683858944 (2559MB)
avail mem = 2591592448 (2471MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 04/30/03, BIOS32 rev. 0 @ 0xfa5b0, SMBIOS
rev. 2.3 @ 0xf0120 (42 entries)
bios0: vendor Award Software International, Inc. version "F4" date 04/30/2003
bios0: Gigabyte Technology Co., Ltd. 8IPE1000P
apm0 at bios0: Power Management spec V1.2 (slowidle)
apm0: AC on, battery charge unknown
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xd1f4
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfd0f0/240 (13 entries)
pcibios0: PCI Exclusive IRQs: 5 9 11
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371SB ISA" rev 0x00)
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0xe400 0xd0000/0x8000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82865G Host" rev 0x02
ppb0 at pci0 dev 1 function 0 "Intel 82865G AGP" rev 0x02
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "NVIDIA GeForce4 Ti 4200" rev 0xa1
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
agp0 at vga1: aperture at 0xe8000000, size 0x8000000
drm at vga1 unsupported
uhci0 at pci0 dev 29 function 0 "Intel 82801EB/ER USB" rev 0x02: irq 5
uhci1 at pci0 dev 29 function 1 "Intel 82801EB/ER USB" rev 0x02: irq 11
uhci2 at pci0 dev 29 function 2 "Intel 82801EB/ER USB" rev 0x02: irq 9
uhci3 at pci0 dev 29 function 3 "Intel 82801EB/ER USB" rev 0x02: irq 5
ehci0 at pci0 dev 29 function 7 "Intel 82801EB/ER USB2" rev 0x02: irq 5
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb1 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xc2
pci2 at ppb1 bus 2
"AT&T/Lucent LTMODEM" rev 0x02 at pci2 dev 1 function 0 not configured
"TI TSB43AB23 FireWire" rev 0x00 at pci2 dev 5 function 0 not configured
fxp0 at pci2 dev 8 function 0 "Intel PRO/100 VE" rev 0x02, i82562: irq 11,
address 00:20:ed:7b:91:f1
inphy0 at fxp0 phy 1: i82562ET 10/100 PHY, rev. 0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801EB/ER LPC" rev 0x02: 24-bit
timer at 3579545Hz
pciide0 at pci0 dev 31 function 1 "Intel 82801EB/ER IDE" rev 0x02: DMA, channel
0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <ST3120024A>
wd0: 16-sector PIO, LBA, 114473MB, 234441648 sectors
atapiscsi0 at pciide0 channel 0 drive 1
scsibus0 at atapiscsi0: 2 targets, initiator 7
cd0 at scsibus0 targ 0 lun 0: <SONY, DVD RW DRU-800A, KY01> ATAPI 5/cdrom
removable
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
wd1 at pciide0 channel 1 drive 0: <ST3120024A>
wd1: 16-sector PIO, LBA, 114470MB, 234435439 sectors
atapiscsi1 at pciide0 channel 1 drive 1
scsibus1 at atapiscsi1: 2 targets, initiator 7
cd1 at scsibus1 targ 0 lun 0: <SONY, DVD RW DW-U10A, 1.1d> ATAPI 5/cdrom
removable
wd1(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5
cd1(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
ichiic0 at pci0 dev 31 function 3 "Intel 82801EB/ER SMBus" rev 0x02: irq 9
iic0 at ichiic0
iic0: addr 0x4e 01=2d 02=10 03=72 05=80 06=0f 0a=ff 0e=e0 0f=ff 3e=0f 4e=0f
words 00=00ff 01=2dff 02=10ff 03=72ff 04=00ff 05=80ff 06=0fff 07=00ff
spdmem0 at iic0 addr 0x50: 512MB DDR SDRAM non-parity PC2700CL2.5
spdmem1 at iic0 addr 0x51: 1GB DDR SDRAM non-parity PC3200CL2.5
spdmem2 at iic0 addr 0x52: 1GB DDR SDRAM non-parity PC3200CL2.5
auich0 at pci0 dev 31 function 5 "Intel 82801EB/ER AC97" rev 0x02: irq 9, ICH5
AC97
ac97: codec id 0x414c4760 (Avance Logic ALC655 rev 0)
audio0 at auich0
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
it0 at isa0 port 0x2e/2: IT8712F rev 0x05, EC port 0x290
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask ef65 netmask ef65 ttymask ffff
mtrr: Pentium Pro MTRR support
Kernelized RAIDframe activated
umass0 at uhub0 port 5 configuration 1 interface 0 "Genesys Logic USB TO IDE"
rev 2.00/0.33 addr 2
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd0 at scsibus2 targ 1 lun 0: <Maxtor 6, L160P0, 0811> SCSI0 0/direct fixed
sd0: 156334MB, 19929 cyl, 255 head, 63 sec, 512 bytes/sec, 320173056 sec total
cd0(atapiscsi0:0:0): Check Condition (error 0x70) on opcode 0x0
SENSE KEY: Not Ready
ASC/ASCQ: Medium Not Present
cd1(atapiscsi1:0:0): Check Condition (error 0x70) on opcode 0x0
SENSE KEY: Not Ready
ASC/ASCQ: Medium Not Present
raid0 at root: (RAID Level 1) total number of sectors is 228143488 (111398 MB)
as root
softraid0 at root
softraid0: wd0d can not read metadata version 0, expected 3
softraid0: wd1d can not read metadata version 0, expected 3
root on raid0a
swapmount: no device
raid0: Error re-writing parity!
