Well, I guess this is the relevant output from startup: umass0 at uhub1 port 1 configuration 1 interface 0 "ZTE, Incorporated ZTE CDMA Technologies MSM" rev 2.00/0.00 addr 2 umass0: using ATAPI over Bulk-Only scsibus1 at umass0: 2 targets, initiator 0 umass0: BBB reset failed, IOERROR umass0: BBB bulk-in clear stall failed, IOERROR umass0: BBB bulk-out clear stall failed, IOERROR umass0: BBB reset failed, IOERROR umass0: BBB bulk-in clear stall failed, IOERROR umass0: BBB bulk-out clear stall failed, IOERROR umass0: BBB reset failed, IOERROR umass0: BBB bulk-in clear stall failed, IOERROR umass0: BBB bulk-out clear stall failed, IOERROR umass0: BBB reset failed, IOERROR umass0: BBB bulk-in clear stall failed, IOERROR umass0: BBB bulk-out clear stall failed, IOERROR umass0: BBB reset failed, IOERROR umass0: BBB bulk-in clear stall failed, IOERROR umass0: BBB bulk-out clear stall failed, IOERROR umass0: BBB reset failed, IOERROR umass0: BBB bulk-in clear stall failed, IOERROR umass0: BBB bulk-out clear stall failed, IOERROR umass0: BBB reset failed, IOERROR umass0: BBB bulk-in clear stall failed, IOERROR umass0: BBB bulk-out clear stall failed, IOERROR umass0: BBB reset failed, IOERROR umass0: BBB bulk-in clear stall failed, IOERROR umass0: BBB bulk-out clear stall failed, IOERROR umass0: BBB reset failed, IOERROR umass0: BBB bulk-in clear stall failed, IOERROR umass0: BBB bulk-out clear stall failed, IOERROR umass0 detached umass0: using SCSI over Bulk-Only scsibus1 at umass0: 2 targets, initiator 0 umass1 at uhub1 port 1 configuration 1 interface 0 "ZTE, Incorporated ZTE CDMA Technologies MSM" rev 2.00/0.00 addr 2 umass1: using ATAPI over Bulk-Only scsibus2 at umass1: 2 targets, initiator 0 cd1 at scsibus1 targ 1 lun 0: <ZTE, USB SCSI CD-ROM, 2.31> ATAPI 5/cdrom removable
So I'm finally geting cd1 :S I need the device to act as Modem. Any help would be really appreciated. Thanks.
