Yup I like them.
- WiFi is same as eeePC (Atheros 5424) so I swpped it out with an Intel wpi
- JMicron mukti card reader not supported
- Intel drm :)
- bsd.mp (Intel Atom supports hyper threading)
- built-in camera appears to work but I've never used it.
OpenBSD 4.5 (GENERIC.MP) #108: Sat Feb 28 14:58:58 MST 2009
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
RTC BIOS diagnostic error 80<clock_battery>
cpu0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz ("GenuineIntel" 686-class) 1.60
GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,xTPR
real mem = 1060163584 (1011MB)
avail mem = 1016795136 (969MB)
RTC BIOS diagnostic error 80<clock_battery>
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 05/09/08, SMBIOS rev. 2.4 @ 0xe8e70
(32 entries)
bios0: vendor Acer version "v0.3114" date 05/09/2008
bios0: Acer AOA150
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP SSDT HPET APIC MCFG ASF! SLIC BOOT
acpi0: wakeup devices P32_(S4) UHC1(S3) UHC2(S3) UHC3(S3) UHC4(S3) ECHI(S3)
EXP1(S4) EXP2(S4) EXP3(S4) EXP4(S4) AZAL(S0) MODM(S0)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 133MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Atom(TM) CPU N270 @ 1.60GHz ("GenuineIntel" 686-class) 1.60
GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,xTPR
ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 4
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 5 (P32_)
acpiprt2 at acpi0: bus 1 (EXP1)
acpiprt3 at acpi0: bus 2 (EXP2)
acpiprt4 at acpi0: bus 3 (EXP3)
acpiprt5 at acpi0: bus 4 (EXP4)
acpiec0 at acpi0
acpicpu0 at acpi0
acpicpu1 at acpi0
acpibtn0 at acpi0: PWRB
acpibtn1 at acpi0: LID0
acpibtn2 at acpi0: SLPB
acpibat0 at acpi0: BAT1 not present
acpiac0 at acpi0: AC unit online
acpivideo at acpi0 not configured
bios0: ROM list: 0xc0000/0xec00! 0xcf000/0x1000
cpu0: unknown Enhanced SpeedStep CPU, msr 0x060f0c2406000c24
cpu0: using only highest and lowest power states
cpu0: Enhanced SpeedStep 1600 MHz (1276 mV): speeds: 1600, 800 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GME Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82945GME Video" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0x40000000, size 0x10000000
inteldrm0 at vga1: apic 4 int 16 (irq 11)
drm0 at inteldrm0
"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: apic 4
int 16 (irq 11)
azalia0: codecs: Realtek ALC268
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 4 int 16
(irq 255)
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 4 int 17
(irq 255)
pci2 at ppb1 bus 2
re0 at pci2 dev 0 function 0 "Realtek 8101E" rev 0x02: RTL8102EL (0x2480),
apic 4 int 17 (irq 11), address 00:1e:68:d5:61:e0
rlphy0 at re0 phy 7: RTL8201L 10/100 PHY, rev. 1
ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02: apic 4 int 18
(irq 255)
pci3 at ppb2 bus 3
wpi0 at pci3 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02: apic 4
int 18 (irq 11), RoW, address 00:18:de:15:1a:36
ppb3 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02: apic 4 int 19
(irq 255)
pci4 at ppb3 bus 4
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 4 int 16
(irq 11)
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 4 int 17
(irq 11)
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 4 int 18
(irq 11)
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 4 int 19
(irq 11)
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 4 int 16
(irq 11)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci5 at ppb4 bus 5
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM
disabled
pciide0 at pci0 dev 31 function 2 "Intel 82801GBM SATA" rev 0x02: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <ST9120817AS>
wd0: 16-sector PIO, LBA48, 114473MB, 234441648 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 4 int
17 (irq 11)
iic0 at ichiic0
spdmem0 at iic0 addr 0x51: 512MB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
acpibat0: BAT1 inserted
uvideo0 at uhub0 port 5 configuration 1 interface 0 "Sonix Technology Co.,
Ltd. USB 2.0 Camera" rev 2.00/1.00 addr 2
video0 at uvideo0
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
"JMicron SD/MMC" rev 0x00 at pci1 dev 0 function 0 not configured
sdhc0 at pci1 dev 0 function 2 "JMicron SD Host Controller" rev 0x00: apic 4
int 16 (irq 255)
sdhc0: base clock frequency unknown
sdhc0 at 0x10: can't initialize host
"JMicron Memory Stick" rev 0x00 at pci1 dev 0 function 3 not configured
"JMicron xD" rev 0x00 at pci1 dev 0 function 4 not configured
On Fri, Sep 18, 2009 at 8:20 AM, Brad Tilley <b...@16systems.com> wrote:
> Hey Misc,
>
> I'm running -current on a first gen Asus eeePC (701 series). It has
> the small 4GB drive, so I use an additional 4GB USB flash drive
> mounted as /usr in order to have room to do stuff. Works OK, just
> wondering if anyone else runs OpenBSD like this on these laptops. The
> new disk setup sizing algorithm doesn't work well on these small
> drives so I lay them out manually, but other than that, everything
> works OK (except the built-in wireless). I'm considering an Acer
> Aspire One as an upgrade to the old eeePC, can anyone recommend those?
>
> Brad
