Hi,
Some times i am not able to open more than "n" number of xterms in my
X ( fvwm2 ).
'n' varies but the error I get while trying to open xterm through
another x term is
$ xterm
xterm: Error 29, errno 35: Resource temporarily unavailable
Reason: spawn: fork() failed
If I try to open aterm through another aterm i get.
$ aterm
aterm: can't fork
aterm: aborting
Sometimes
$ls
jut hangs!
What could be the trouble?
Thanks
Siju
$ dmesg
OpenBSD 4.5-stable (GENERIC) #0: Tue Jun 2 10:15:05 IST 2009
r...@risen.hifxchn2.local:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) 4 CPU 2.80GHz ("GenuineIntel" 686-class) 2.81 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,CNXT-ID,xTPR
real mem = 2113433600 (2015MB)
avail mem = 2035261440 (1940MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 06/02/05, BIOS32 rev. 0 @
0xfa830, SMBIOS rev. 2.3 @ 0xf0800 (40 entries)
bios0: vendor Phoenix Technologies, LTD version "6.00 PG" date 06/02/2005
bios0: Acer Aspire SA60
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP APIC
acpi0: wakeup devices USB0(S5) USB1(S5) USB2(S5) USB3(S5) MAC0(S5)
AMR0(S4) UAR1(S5) PS2M(S5) PS2K(S4) PCI0(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 133MHz
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 14, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpicpu0 at acpi0
acpitz0 at acpi0: critical temperature 90 degC
acpibtn0 at acpi0: PWRB
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x4000!
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "SiS 661 PCI" rev 0x11
sisagp0 at pchb0
agp0 at sisagp0: aperture at 0xe8000000, size 0x4000000
ppb0 at pci0 dev 1 function 0 "SiS 648FX AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "SiS 6330 VGA" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 2 function 0 "SiS 964 ISA" rev 0x36
pciide0 at pci0 dev 2 function 5 "SiS 5513 EIDE" rev 0x01: 661: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
wd0 at pciide0 channel 0 drive 0: <WDC WD400BB-00HEA0>
wd0: 16-sector PIO, LBA, 38166MB, 78165360 sectors
wd1 at pciide0 channel 0 drive 1: <WDC WD800BB-00JHC0>
wd1: 16-sector PIO, LBA, 76319MB, 156301488 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 5
pciide0: channel 1 disabled (no drives)
auich0 at pci0 dev 2 function 7 "SiS 7012 AC97" rev 0xa0: apic 2 int
18 (irq 5), SiS7012 AC97
ac97: codec id 0x414c4760 (Avance Logic ALC655 rev 0)
audio0 at auich0
ohci0 at pci0 dev 3 function 0 "SiS 5597/5598 USB" rev 0x0f: apic 2
int 20 (irq 10), version 1.0, legacy support
ohci1 at pci0 dev 3 function 1 "SiS 5597/5598 USB" rev 0x0f: apic 2
int 21 (irq 11), version 1.0, legacy support
ohci2 at pci0 dev 3 function 2 "SiS 5597/5598 USB" rev 0x0f: apic 2
int 22 (irq 9), version 1.0, legacy support
ehci0 at pci0 dev 3 function 3 "SiS 7002 USB" rev 0x00: apic 2 int 23 (irq 3)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "SiS EHCI root hub" rev 2.00/1.00 addr 1
sis0 at pci0 dev 4 function 0 "SiS 900 10/100BaseTX" rev 0x90: apic 2
int 19 (irq 11), address 00:01:6c:c6:8a:ab
rlphy0 at sis0 phy 1: RTL8201L 10/100 PHY, rev. 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
it0 at isa0 port 0x2e/2: IT8705F rev 3, EC port 0x290
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "SiS OHCI root hub" rev 1.00/1.00 addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 "SiS OHCI root hub" rev 1.00/1.00 addr 1
usb3 at ohci2: USB revision 1.0
uhub3 at usb3 "SiS OHCI root hub" rev 1.00/1.00 addr 1
mtrr: Pentium Pro MTRR support
uhidev0 at uhub2 port 1 configuration 1 interface 0 "Dell Dell Premium
USB Optical Mouse" rev 2.00/0.09 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 5 buttons, Z dir
wsmouse0 at ums0 mux 0
uhidev1 at uhub3 port 1 configuration 1 interface 0 "Chicony USB
Keyboard" rev 2.00/1.00 addr 2
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev2 at uhub3 port 1 configuration 1 interface 1 "Chicony USB
Keyboard" rev 2.00/1.00 addr 2
uhidev2: iclass 3/0, 3 report ids
uhid0 at uhidev2 reportid 1: input=1, output=0, feature=0
uhid1 at uhidev2 reportid 2: input=1, output=0, feature=0
uhid2 at uhidev2 reportid 3: input=3, output=0, feature=0
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
kqemu: kqemu version 0x00010300 loaded, max locked mem=1031948kB
DDB symbols added: 337632 bytes
umass0 at uhub0 port 7 configuration 1 interface 0 "JetFlash Mass
Storage Device" rev 2.00/1.41 addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, initiator 0
sd0 at scsibus0 targ 1 lun 0: <JetFlash, TS4GJFV30, 8.07> SCSI2
0/direct removable
sd0: 3899MB, 512 bytes/sec, 7987198 sec total
sd0 detached
scsibus0 detached
umass0 detached
auich0: measured ac97 link rate at 48013 Hz, will use 48000 Hz
