Hi.
For five days in a row now I've been having the same issue. 2 days ago I
upgraded to a never snapshot in case it would fix my problem without
luck.
This is @home on a DSL lines. OpenBSD gateway is connected to the modem
with an axe(4), default setup, nothing fancy running...
Every night I'm doing an rsnapshot backup off site of a small amount of
data (couple of Gb). This setup has been running for about a year.
Since 5 days, the connexion hangs during that backup, everytime.
My logs are empty and the only way to get net access again is to:
# pfctl -d ; sleep 2 ; pfctl -e
pyr@ and I couldn't find anything obviously wrong. I'm not sure where I
should start to debug this and would appreciate any hint.
Thanks.
INFO:
Status: Enabled for 1 days 00:38:41 Debug: Urgent
State Table Total Rate
current entries 77
searches 9982542 112.5/s
inserts 179453 2.0/s
removals 179376 2.0/s
Counters
match 180540 2.0/s
bad-offset 0 0.0/s
fragment 0 0.0/s
short 0 0.0/s
normalize 0 0.0/s
memory 0 0.0/s
bad-timestamp 0 0.0/s
congestion 0 0.0/s
ip-option 0 0.0/s
proto-cksum 0 0.0/s
state-mismatch 72 0.0/s
state-insert 1 0.0/s
state-limit 0 0.0/s
src-limit 10 0.0/s
synproxy 0 0.0/s
TIMEOUTS:
tcp.first 120s
tcp.opening 30s
tcp.established 86400s
tcp.closing 900s
tcp.finwait 45s
tcp.closed 90s
tcp.tsdiff 30s
udp.first 60s
udp.single 30s
udp.multiple 60s
icmp.first 20s
icmp.error 10s
other.first 60s
other.single 30s
other.multiple 60s
frag 30s
interval 10s
adaptive.start 6000 states
adaptive.end 12000 states
src.track 0s
LIMITS:
states hard limit 10000
src-nodes hard limit 10000
frags hard limit 5000
tables hard limit 1000
table-entries hard limit 200000
OpenBSD 4.6-current (GENERIC) #105: Mon Aug 10 18:02:36 MDT 2009
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: VIA Esther processor 1000MHz ("CentaurHauls" 686-class) 1 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,CMOV,PAT,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,TM,SBF,SSE3,EST,TM2
real mem = 469254144 (447MB)
avail mem = 445857792 (425MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 06/16/06, BIOS32 rev. 0 @ 0xfa960, SMBIOS
rev. 2.3 @ 0xf0800 (26 entries)
bios0: vendor Phoenix Technologies, LTD version "6.00 PG" date 06/16/2006
apm0 at bios0: Power Management spec V1.2 (slowidle)
apm0: AC on, battery charge unknown
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdd14
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdc60/176 (9 entries)
pcibios0: bad IRQ table checksum
pcibios0: PCI BIOS has 9 Interrupt Routing table entries
pcibios0: PCI Exclusive IRQs: 5 10 11
pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT8237 ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xf200 0xd0000/0x8000! 0xd8000/0x4400!
cpu0 at mainbus0: (uniprocessor)
cpu0: RNG AES AES-CTR SHA1 SHA256 RSA
cpu0: unknown Enhanced SpeedStep CPU, msr 0x08100a1308000a13
cpu0: using only highest and lowest power states
cpu0: Enhanced SpeedStep 998 MHz: speeds: 1000, 800 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "VIA CN700 Host" rev 0x00
viaagp0 at pchb0: v3
agp0 at viaagp0: aperture at 0xe8000000, size 0x10000000
pchb1 at pci0 dev 0 function 1 "VIA CN700 Host" rev 0x00
pchb2 at pci0 dev 0 function 2 "VIA CN700 Host" rev 0x00
pchb3 at pci0 dev 0 function 3 "VIA PT890 Host" rev 0x00
pchb4 at pci0 dev 0 function 4 "VIA CN700 Host" rev 0x00
pchb5 at pci0 dev 0 function 7 "VIA CN700 Host" rev 0x00
ppb0 at pci0 dev 1 function 0 "VIA VT8377 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "VIA S3 Unichrome PRO IGP" rev 0x01
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pciide0 at pci0 dev 15 function 0 "VIA VT6420 SATA" rev 0x80: DMA
pciide0: using irq 11 for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <SAMSUNG HD160HJ>
wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
pciide1 at pci0 dev 15 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133, channel
0 configured to compatibility, channel 1 configured to compatibility
pciide1: channel 0 disabled (no drives)
pciide1: channel 1 disabled (no drives)
uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x81: irq 10
uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x81: irq 10
uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x81: irq 11
uhci3 at pci0 dev 16 function 3 "VIA VT83C572 USB" rev 0x81: irq 11
ehci0 at pci0 dev 16 function 4 "VIA VT6202 USB" rev 0x86: irq 5
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "VIA EHCI root hub" rev 2.00/1.00 addr 1
viapm0 at pci0 dev 17 function 0 "VIA VT8237 ISA" rev 0x00
iic0 at viapm0
spdmem0 at iic0 addr 0x50: 512MB DDR2 SDRAM non-parity PC2-4200CL5
auvia0 at pci0 dev 17 function 5 "VIA VT8233 AC97" rev 0x60: irq 5
ac97: codec id 0x56494182 (VIA Technologies <82>)
ac97: codec features 18 bit DAC, 18 bit ADC, No 3D Stereo
audio0 at auvia0
vr0 at pci0 dev 18 function 0 "VIA RhineII-2" rev 0x78: irq 10, address
00:40:63:ee:19:60
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 10: OUI
0x004063, model 0x0032
puc0 at pci0 dev 20 function 0 "NetMos Nm9835" rev 0x01: ports: 2 com, 1 lpt
com3 at puc0 port 0 irq 11: ns16550a, 16 byte fifo
com4 at puc0 port 1 irq 11: ns16550a, 16 byte fifo
lpt3 at puc0 port 2 irq 11
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "VIA UHCI root hub" rev 1.00/1.00 addr 1
isa0 at mainbus0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
viasio0 at isa0 port 0x2e/2: VT1211 rev 0x02, HM, WDG not activated
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
biomask ff6d netmask ff6d ttymask ffff
mtrr: Pentium Pro MTRR support
axe0 at uhub0 port 4 configuration 1 interface 0 "Apple Computer Ethernet
A1277" rev 2.00/0.01 addr 2
axe0: AX88772, address 00:1f:f3:8b:3b:3c
ukphy1 at axe0 phy 16: Generic IEEE 802.3u media interface, rev. 1: OUI
0x000ec6, model 0x0006
umass0 at uhub0 port 8 configuration 1 interface 0 "Philips Philips Harddisk"
rev 2.00/0.00 addr 3
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, initiator 0
sd0 at scsibus0 targ 1 lun 0: <Hitachi, HDT725050VLAT80, V56O> SCSI0 0/direct
fixed
sd0: 476940MB, 512 bytes/sec, 976773168 sec total
uscanner0 at uhub3 port 2 configuration 1 interface 0 "EPSON USB MFP" rev
1.10/1.00 addr 2
ulpt0 at uhub3 port 2 configuration 1 interface 1 "EPSON USB MFP" rev 1.10/1.00
addr 2
ulpt0: using bi-directional mode
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
--
Antoine
